The role of temperature in the photoluminescence quantum yield (PLQY) of AgS-based nanocrystals.

Highly emissive AgS nanocrystals (NCs) passivated with a gradated shell incorporating Se and Zn were synthesized in air, and the temperature dependence of their photoluminescence quantum yield (PLQY) was quantified in both organic and aqueous media at ∼1200 nm. The relevance of this parameter, measured at physiological temperatures, is highlighted for applications that rely on the near infrared (NIR) photoluminescence of NCs, such as deep NIR imaging or luminescence nanothermometry. Hyperspectral NIR imaging shows that AgS-based NCs with a PLQY in organic media of about 10% are inefficient for imaging at 40 °C through 20 mm thick tissue with low laser irradiation power densities.

Demonstration of tritium adsorption on graphene.

In this work, we report on studies of graphene exposed to tritium gas in a controlled environment. The single layer graphene on a SiO/Si substrate was exposed to 400 mbar of T, for a total time of ∼55 h. The resistivity of the graphene sample was measured during tritium exposure using the van der Pauw method.

Versatile Confocal Raman Imaging Microscope Built from Off-the-Shelf Opto-Mechanical Components.

Confocal Raman microscopic (CRM) imaging has evolved to become a key tool for spatially resolved, compositional analysis and imaging, down to the μm-scale, and nowadays one may choose between numerous commercial instruments. That notwithstanding, situations may arise which exclude the use of a commercial instrument, e.g.

Accurate Reference Gas Mixtures Containing Tritiated Molecules: Their Production and Raman-Based Analysis.

Highly accurate, quantitative analyses of mixtures of hydrogen isotopologues-both the stable species, H, D, and HD, and the radioactive species, T, HT, and DT-are of great importance in fields as diverse as deuterium-tritium fusion, neutrino mass measurements using tritium β-decay, or for photonuclear experiments in which hydrogen-deuterium targets are used. In this publication we describe a production, handling, and analysis facility capable of fabricating well-defined gas samples, which may contain any of the stable and radioactive hydrogen isotopologues, with sub-percent accuracy for the relative species concentrations. The production is based on precise manometric gas mixing of H, D, and T.

Improving the Detection Limit in a Capillary Raman System for In Situ Gas Analysis by Means of Fluorescence Reduction.

Raman spectroscopy for low-pressure or trace gas analysis is rather challenging, in particular in process control applications requiring trace detection and real-time response; in general, enhancement techniques are required. One possible enhancement approach which enjoys increasing popularity makes use of an internally-reflective capillary as the gas cell. However, in the majority of cases, such capillary systems were often limited in their achievable sensitivity by a significant fluorescence background, which is generated as a consequence of interactions between the laser light and optical glass components in the setup.

Automated quantitative spectroscopic analysis combining background subtraction, cosmic ray removal, and peak fitting.

An integrated concept for post-acquisition spectrum analysis was developed for in-line (real-time) and off-line applications that preserves absolute spectral quantification; after the initializing parameter setup, only minimal user intervention is required. This spectral evaluation suite is composed of a sequence of tasks specifically addressing cosmic ray removal, background subtraction, and peak analysis and fitting, together with the treatment of two-dimensional charge-coupled device array data. One may use any of the individual steps on their own, or may exclude steps from the chain if so desired.

Single-pollen analysis by laser-induced breakdown spectroscopy and Raman microscopy.

The application of laser-induced breakdown spectroscopy to the analysis of single biological microparticles (bioaerosols) is described, exemplified here for a range of pollens. Spectra were recorded by exposure of the pollen to a single laser pulse from a Nd:YAG laser (lambda = 1064 nm, Ep approximately 30 mJ). The intensities of the single-pulse laser-induced breakdown spectra fluctuated dramatically, but an internal signal calibration procedure was applied that referenced elemental line intensities to the carbon matrix of the sample (represented by molecular bands of CN and C2).

Application of frustrated total internal reflection devices to analytical laser spectroscopy.

Novel implementations of single-fiber laser-induced breakdown spectroscopy and laser-induced fluorescence spectroscopy systems that gated light switches based on frustrated total internal reflection are described. The switching devices are largely wavelength independent, with full temporal and spatial separation of laser and fluorescence light. Wavelength-independent beam separation or beam combination schemes can be implemented for coaxial optical setups, e.

Laser-induced breakdown spectroscopy: a tool for real-time, in vitro and in vivo identification of carious teeth.

BACKGROUND: Laser Induced Breakdown Spectroscopy (LIBS) can be used to measure trace element concentrations in solids, liquids and gases, with spatial resolution and absolute quantifaction being feasible, down to parts-per-million concentration levels. Some applications of LIBS do not necessarily require exact, quantitative measurements. These include applications in dentistry, which are of a more "identify-and-sort" nature - e.