Bactericidal and Synergistic Effects of Essential Oil and Its Main Constituents against Multidrug-Resistant Strains of .

Bacterial resistance in is a significant public health challenge, as these bacteria can evade multiple antibiotics, leading to difficult-to-treat infections with high mortality rates. As part of the search for alternatives, essential oils from medicinal plants have shown promising antibacterial potential due to their diverse chemical constituents. This study evaluated the antibacterial, antibiofilm, and synergistic activities of the essential oil of (EOLo) and its main constituents against multidrug-resistant clinical isolates of .

Recent advances in colorimetric and photoluminescent fibrillar devices, photonic crystals and carbon dot-based sensors for mercury (II) ion detection.

The escalating environmental contamination with mercury has become a pressing issue, significantly impacting human beings and nature. For instance, small-scale gold mining has led to severe contamination in the Brazilian Yanomami village, highlighting the urgent need for action. The development of fibrillar-based sensors for mercury (II) ions represents an important issue to be considered in the point-of-care and simple detection of contaminants in water.

Statistics design for the synthesis optimization of lignin-sulfonate sulfur-doped mesoporous carbon materials: promising candidates as adsorbents and supercapacitors materials.

This study employed lignin-sulfonated (LS) to develop biobased carbon materials (LS-Cs) through a sulfur-doping approach to enhance their physicochemical properties, adsorption capabilities, and energy storage potentials. Various characterization techniques, including BET surface area analysis, SEM imaging, XPS, Raman spectroscopy, and elemental composition (CHNS), were employed to assess the quality of the LS-Cs adsorbent and electrode samples. Response Surface Methodology (RSM) was utilized for optimizing the two main properties (specific surface area, A and mesopore area, A) by evaluating three independent factors (i.

Supercapacitors and triboelectric nanogenerators based on electrodes of greener iron nanoparticles/carbon nanotubes composites.

The development of supporting materials based on carbon nanotubes (CNTs) impregnated with iron nanoparticles via a sustainable and green synthesis employing plant extract of Punica granatum L. leaves was carried out for the iron nanoparticle modification and the following impregnation into the carbon nanotubes composites (CNT-Fe) that were also coated with polypyrrole (CNT-Fe + PPy) for use as electrode for supercapacitor and triboelectric nanogenerators. The electrochemical characterization of the materials by cyclic voltammetry (CV) and galvanostatic charge-discharge (GCD) assays revealed that the CNT-Fe + PPy gave rise to better performance due to the association of double-layer capacitance behavior of carbon derivative in association with the pseudocapacitance contribution of PPy resulting in an areal capacitance value 202 mF/ cm for the overall composite.

Antimicrobial and antibiofilm activity of highly soluble polypyrrole against methicillin-resistant Staphylococcus aureus.

Aims: The purpose was to evaluate the antimicrobial activity of highly soluble polypyrrole (Hs-PPy), alone or combined with oxacillin, as well as its antibiofilm potential against methicillin-resistant Staphylococcus aureus strains. Furthermore, the in silico inhibitory mechanism in efflux pumps was also investigated.

Methods And Results: Ten clinical isolates of methicillin-resistant Staphylococcus aureus (MRSA) and two reference strains were used.

Flexible genosensors based on polypyrrole and graphene quantum dots for PML/RARα fusion gene detection: A study of acute promyelocytic leukemia in children.

Acute promyelocytic leukemia (APL) in children is associated with a favorable initial prognosis. However, minimal residual disease (MRD) follow-up remains poorly defined, and relapse cases are concerning due to their recurrent nature. Thus, we report two electrochemical flexible genosensors based on polypyrrole (PPy) and graphene quantum dots (GQDs) for label-free PML-RARα oncogene detection.

Synergistic interaction of clove, cinnamon, and eucalyptus essential oils impregnated in cellulose acetate electrospun fibers as antibacterial agents against Staphylococcus aureus.

The development of antibiotic-free antibacterial strategies applied in the control of bacterial and biofilm proliferation on surfaces is an important topic in discussion in the literature. Essential oils have been explored as isolated and combined components to act as an antibacterial material that inhibits bacterial proliferation, avoiding the contamination of surfaces. Herein, cellulose acetate electrospun fibers impregnated with essential oils of clove, cinnamon and eucalyptus and their combination (clove + cinnamon, cinnamon + eucalyptus and clove + eucalyptus) were explored against the standard strain of Staphylococcus aureus (ATCC 25923).

Sustainable Biomass-Derived Carbon Electrodes for Potassium and Aluminum Batteries: Conceptualizing the Key Parameters for Improved Performance.

The development of sustainable, safe, low-cost, high energy and density power-density energy storage devices is most needed to electrify our modern needs to reach a carbon-neutral society by ~2050. Batteries are the backbones of future sustainable energy sources for both stationary off-grid and mobile plug-in electric vehicle applications. Biomass-derived carbon materials are extensively researched as efficient and sustainable electrode/anode candidates for lithium/sodium-ion chemistries due to their well-developed tailored textures (closed pores and defects) and large microcrystalline interlayer spacing and therefore opens-up their potential applications in sustainable potassium and aluminum batteries.

Oomicidal activity of polypyrrole nanoparticles against Pythium insidiosum.

This study evaluated in-vitro action of a new molecule, the polypyrrole nanoparticles (Ppy-NP), against Pythium insidiosum isolates using M38-A2/CLSI; the minimal inhibitory (MIC) and minimal oomicidal (MOC) concentrations were also determined. Additionally, changes in the hyphae wall of P. insidiosum CBS 575.

3-Aminopropyl-triethoxysilane-Functionalized Tannin-Rich Grape Biomass for the Adsorption of Methyl Orange Dye: Synthesis, Characterization, and the Adsorption Mechanism.

A biomass amino silica-functionalized material was successfully prepared by a simple sol-gel method. 3-Aminopropyltriethoxysilane (APTES) was added to a tannin-rich grape residue to improve its physicochemical properties and enhance the adsorption performance. The APTES functionalization led to significant changes in the material's characteristics.

Facile Synthesis of Sustainable Biomass-Derived Porous Biochars as Promising Electrode Materials for High-Performance Supercapacitor Applications.

Preparing sustainable and highly efficient biochars as electrodes remains a challenge for building green energy storage devices. In this study, efficient carbon electrodes for supercapacitors were prepared via a facile and sustainable single-step pyrolysis method using spruce bark as a biomass precursor. Herein, biochars activated by KOH and ZnCl are explored as templates to be applied to prepare electrodes for supercapacitors.

Process Parameters Optimization, Characterization, and Application of KOH-Activated Norway Spruce Bark Graphitic Biochars for Efficient Azo Dye Adsorption.

In this work, Norway spruce bark was used as a precursor to prepare activated biochars (BCs) via chemical activation with potassium hydroxide (KOH) as a chemical activator. A Box-Behnken design (BBD) was conducted to evaluate and identify the optimal conditions to reach high specific surface area and high mass yield of BC samples. The studied BC preparation parameters and their levels were as follows: pyrolysis temperature (700, 800, and 900 °C), holding time (1, 2, and 3 h), and ratio of the biomass: chemical activator of 1: 1, 1.

Comparative Proteomic Analyses Between Biofilm-Forming and Non-biofilm-Forming Strains of o Isolated From Goats.

Caseous lymphadenitis (CLA) is a chronic disease that affects small ruminants and causes economic losses in the associated breeding system. The causative agent of CLA is , a Gram-positive bacterium that exhibits tropism for external and internal lymph nodes and induces abscess formation in the host. Bacterial communities often produce a biofilm matrix that serves various functions, including protection against hostile environmental conditions, antibiotics, and the host immune response.

Sustainable Biomass Activated Carbons as Electrodes for Battery and Supercapacitors-A Mini-Review.

Some recent developments in the preparation of biomass carbon electrodes (CEs) using various biomass residues for application in energy storage devices, such as batteries and supercapacitors, are presented in this work. The application of biomass residues as the primary precursor for the production of CEs has been increasing over the last years due to it being a renewable source with comparably low processing cost, providing prerequisites for a process that is economically and technically sustainable. Electrochemical energy storage technology is key to the sustainable development of autonomous and wearable electronic devices.

Anti-biofilm Effect of β-Lapachone and Lapachol Oxime Against Isolates of Staphylococcus aureus.

Antimicrobial resistance in bacteria, such as Staphylococcus aureus, has been the subject of many assistance studies of alternatives for the treatment of infections. These studies aim to solve this problem for bacteria, such as biofilm formation. Aiming to control the emergence of the problem or enhance antibiotic activity, the data sources are inserted into new therapeutic alternatives for the treatment of infections.

Improvement of Baker's yeast-based fuel cell power output by electrodes and proton exchange membrane modification.

The production of more efficient yeast-based fuel cells (YFCs) depends on a combination of effective proton exchange membranes, electron mediators and current collectors. The adhesion of organisms on electrode surface plays a key role in the electron transfer process optimizing the generated power density. In this work, it is reported the preparation of a new YFC prototype using membranes of polyvinyl alcohol/ phosphoric acid and anodes of carbon nanotubes/polyurethane.

UV random laser emission from flexible ZnO-Ag-enriched electrospun cellulose acetate fiber matrix.

We report an alternative random laser (RL) architecture based on a flexible and ZnO-enriched cellulose acetate (CA) fiber matrix prepared by electrospinning. The electrospun fibers, mechanically reinforced by polyethylene oxide and impregnated with zinc oxide powder, were applied as an adsorbent surface to incorporate plasmonic centers (silver nanoprisms). The resulting structures - prepared in the absence (CA-ZnO) and in the presence of silver nanoparticles (CA-ZnO-Ag) - were developed to support light excitation, guiding and scattering prototypes of a RL.

Silver-based surface enhanced Raman spectroscopy devices for detection of organophosphorus pesticides traces.

The detection of traces of substances by surface-sensitive techniques such as surface enhanced Raman spectroscopy (SERS) explores the interaction of adsorbed molecules on plasmonic surfaces to improve the limit of detection of analytes. This article is an overview about recent development in SERS substrates applied in the detection of organophosphorus pesticides on plasmonic surfaces (arrays of metal nanoparticles). The morphology, roughness, chemical functionalization degree, and aggregation level of plasmonic centers are some of the critical parameters to be controlled in the optimization of SERS signal from specific analytes.

Low intensity electric field inactivation of Gram-positive and Gram-negative bacteria via metal-free polymeric composite.

The adhesion of pathogenic bacteria in medical implants and surfaces is a health-related problem that requires strong inhibition against bacterial growth and attachment. In this work, we have explored the enhancement in the antibacterial activity of metal free-based composites under external electric field. It affects the oxidation degree of polypyrrole-based electrodes and consequently the antibacterial activity of the material.

Inhibitory effects of Morus nigra L. (Moraceae) against local paw edema and mechanical hypernociception induced by Bothrops jararacussu snake venom in mice.

Background: Bothropic venoms cause intense local damage, pain, edema, and myonecrosis. Morus nigra L. (Moraceae) has several uses in folk medicine and can be a promising candidate for the treatment of several inflammatory disorders.

A random laser based on electrospun polymeric composite nanofibers with dual-size distribution.

Electrospun fiber-based random lasers are environment-friendly flexible systems in which waveguiding/scattering processes provided by their structure with a broad distribution of diameters are essential elements to generate a suitable lasing mechanism. In this work, we prepared electrospun fibers with dual-size diameter distribution (above and below the critical value for waveguiding), allowing that both optical processes can be established in the polymer network. As a result, random laser emission was observed for the electrospun fibers presenting dual-size diameters with rhodamine 6G as the gain medium, characterizing the combination of waveguiding/scattering as an adequate condition for development of organic nanofibrous random lasers.

Usnic acid-loaded polyaniline/polyurethane foam wound dressing: preparation and bactericidal activity.

The improved bactericidal activity of new composites for wound dressing prototypes represents an important strategy for development of more efficient devices that make use of synergistic interaction between components. The doping level of polyaniline represents a critical parameter for its corresponding biologic activity. In this work, it is explored the doping effect of usnic acid on undoped polyaniline, that introduces important advantages namely, improved bactericidal activity of polyaniline and the anti-biofilm properties of lichen derivative.

Multifunctional Wearable Electronic Textiles Using Cotton Fibers with Polypyrrole and Carbon Nanotubes.

Multifunctional wearable electronic textiles based on interfacial polymerization of polypyrrole on carbon nanotubes/cotton fibers offer advantages of simple and low-cost materials that incorporate bactericidal, good electrochemical performance, and electrical heating properties. The high conductivity of doped polypyrrole/CNT composite provides textiles that reaches temperature on order of 70 °C with field of 5 V/cm, superior electrochemical performance applied as electrodes of supercapacitor prototypes, reaching capacitance in order of 30 F g and strong bactericidal activity against Staphylococcus aureus. The combination of these properties can be explored in smart devices for heat and microbial treatment on different parts of body, with incorporated storage of energy on textiles.

Real-time monitoring of amyloid fibrillation by electrical impedance spectroscopy.

Electrical impedance spectroscopy (EIS) appears a promising label-free methodology for the investigation of processes related to the aggregation of macromolecules in solution. Here, we explore the EIS technique as a convenient tool for studying the irreversible aggregation of human insulin and describing its corresponding fibrillation kinetics. The in situ measurement of the electrical response of pure insulin solutions at 60°C allows for the real-time monitoring of the protein fibrillation as a function of the incubation time.