The influence of AlN buffer layer on the growth of self-assembled GaN nanocolumns on graphene.

GaN nanocolumns were synthesized on single-layer graphene via radio-frequency plasma-assisted molecular beam epitaxy, using a thin migration-enhanced epitaxy (MEE) AlN buffer layer as nucleation sites. Due to the weak nucleation on graphene, instead of an AlN thin-film we observe two distinguished AlN formations which affect the subsequent GaN nanocolumn growth: (i) AlN islands and (ii) AlN nanostructures grown along line defects (grain boundaries or wrinkles) of graphene. Structure (i) leads to the formation of vertical GaN nanocolumns regardless of the number of AlN MEE cycles, whereas (ii) can result in random orientation of the nanocolumns depending on the AlN morphology.

Epitaxially grown III-arsenide-antimonide nanowires for optoelectronic applications.

Epitaxially grown ternary III-arsenide-antimonide (III-As-Sb) nanowires (NWs) are increasingly attracting attention due to their feasibility as a platform for the integration of largely lattice-mismatched antimonide-based heterostructures while preserving the high crystal quality. This and the inherent bandgap tuning flexibility of III-As-Sb in the near- and mid-infrared wavelength regions are important and auspicious premises for a variety of optoelectronic applications. In this review, we summarize the current understanding of the nucleation, morphology-change and crystal phase evolution of GaAsSb and InAsSb NWs and their characterization, especially in relation to Sb incorporation during growth.

Single GaAs Nanowire/Graphene Hybrid Devices Fabricated by a Position-Controlled Microtransfer and an Imprinting Technique for an Embedded Structure.

We developed a new technique to fabricate single nanowire devices with reliable graphene/nanowire contacts using a position-controlled microtransfer and an embedded nanowire structure in a planar junction configuration. A thorough study of electrical properties and fabrication challenges of single p-GaAs nanowire/graphene devices was carried out in two different device configurations: (1) a graphene bottom-contact device where the nanowire-graphene contact junction is formed by transferring a nanowire on top of graphene and (2) a graphene top-contact device where the nanowire-graphene contact junction is formed by transferring graphene on top of an embedded nanowire. For the graphene top-contact devices, graphene-nanowire-metal devices, where graphene is used as one electrode and metal is the other electrode to a nanowire, and graphene-nanowire-graphene devices, where both electrodes to a nanowire are graphene, were investigated and compared with conventional metal/p-GaAs nanowire devices.

GaN/AlGaN Nanocolumn Ultraviolet Light-Emitting Diode Using Double-Layer Graphene as Substrate and Transparent Electrode.

The many outstanding properties of graphene have impressed and intrigued scientists for the last few decades. Its transparency to light of all wavelengths combined with a low sheet resistance makes it a promising electrode material for novel optoelectronics. So far, no one has utilized graphene as both the substrate and transparent electrode of a functional optoelectronic device.

Vertical GaN nanocolumns grown on graphene intermediated with a thin AlN buffer layer.

We report on the self-assembled growth of high-density and vertically-oriented n-doped GaN nanocolumns on graphene by radio-frequency plasma-assisted molecular beam epitaxy. Graphene was transferred to silica glass, which was used as the substrate carrier. Using a migration enhanced epitaxy grown AlN buffer layer for the nucleation is found to enable a high density of vertical GaN nanocolumns with c-axis growth orientation on graphene.

Single-Mode Near-Infrared Lasing in a GaAsSb-Based Nanowire Superlattice at Room Temperature.

Semiconductor nanowire lasers can produce guided coherent light emission with miniaturized geometry, bringing about new possibilities for a variety of applications including nanophotonic circuits, optical sensing, and on-chip and chip-to-chip optical communications. Here, we report on the realization of single-mode and room-temperature lasing from 890 to 990 nm, utilizing a novel design of single nanowires with GaAsSb-based multiple axial superlattices as a gain medium under optical pumping. The control of lasing wavelength via compositional tuning with excellent room-temperature lasing performance is shown to result from the unique nanowire structure with efficient gain material, which delivers a low lasing threshold of ∼6 kW/cm (75 μJ/cm per pulse), a lasing quality factor as high as 1250, and a high characteristic temperature of ∼129 K.

Low frequency noise in single GaAsSb nanowires with self-induced compositional gradients.

Due to bandgap tunability, GaAsSb nanowires (NWs) have received a great deal of attention for a variety of optoelectronic device applications. However, electrical and optical properties of GaAsSb are strongly affected by Sb-related defects and scattering from surface states and/or defects, which can limit the performance of GaAsSb NW devices. Thus, in order to utilize the GaAsSb NWs for high performance electronic and optoelectronic devices, it is required to study the material and interface properties (e.

Vertically Oriented Growth of GaN Nanorods on Si Using Graphene as an Atomically Thin Buffer Layer.

The monolithic integration of wurtzite GaN on Si via metal-organic vapor phase epitaxy is strongly hampered by lattice and thermal mismatch as well as meltback etching. This study presents single-layer graphene as an atomically thin buffer layer for c-axis-oriented growth of vertically aligned GaN nanorods mediated by nanometer-sized AlGaN nucleation islands. Nanostructures of similar morphology are demonstrated on graphene-covered Si(111) as well as Si(100).

In Situ Heat-Induced Replacement of GaAs Nanowires by Au.

Here we report on the heat-induced solid-state replacement of GaAs by Au in nanowires. Such replacement of semiconductor nanowires by metals is envisioned as a method to achieve well-defined junctions within nanowires. To better understand the mechanisms and dynamics that govern the replacement reaction, we performed in situ heating studies using high-resolution scanning transmission electron microscopy.

New Insights into the Origins of Sb-Induced Effects on Self-Catalyzed GaAsSb Nanowire Arrays.

Ternary semiconductor nanowire arrays enable scalable fabrication of nano-optoelectronic devices with tunable bandgap. However, the lack of insight into the effects of the incorporation of Vy element results in lack of control on the growth of ternary III-V(1-y)Vy nanowires and hinders the development of high-performance nanowire devices based on such ternaries. Here, we report on the origins of Sb-induced effects affecting the morphology and crystal structure of self-catalyzed GaAsSb nanowire arrays.

Rectifying Single GaAsSb Nanowire Devices Based on Self-Induced Compositional Gradients.

Device configurations that enable a unidirectional propagation of carriers in a semiconductor are fundamental components for electronic and optoelectronic applications. To realize such devices, however, it is generally required to have complex processes to make p-n or Schottky junctions. Here we report on a unidirectional propagation effect due to a self-induced compositional variation in GaAsSb nanowires (NWs).

Self-catalyzed MBE grown GaAs/GaAs(x)Sb(1-x) core-shell nanowires in ZB and WZ crystal structures.

We have investigated the growth of self-catalyzed GaAs/GaAs(x)Sb(1-x) core-shell nanowires directly on Si(111) substrates by molecular beam epitaxy. The compositions of the GaAs(x)Sb(1-x) shells are tuned in a wide range where the Sb-content is varied from 10 to ~70%, covering the miscibility gap. In addition, the GaAs(x)Sb(1-x) shells are grown on both zinc blende (ZB) and wurtzite (WZ) crystal structures.

A story told by a single nanowire: optical properties of wurtzite GaAs.

The optical properties of the wurtzite (WZ) GaAs crystal phase found in nanowires (NWs) are a highly controversial topic. Here, we study high-quality pure WZ GaAs/AlGaAs core-shell NWs grown by Au-assisted molecular beam epitaxy (MBE) with microphotoluminescence spectroscopy (μ-PL) and (scanning) transmission electron microscopy on the very same single wire. We determine the room temperature (294 K) WZ GaAs bandgap to be 1.

Vertically aligned GaAs nanowires on graphite and few-layer graphene: generic model and epitaxial growth.

By utilizing the reduced contact area of nanowires, we show that epitaxial growth of a broad range of semiconductors on graphene can in principle be achieved. A generic atomic model is presented which describes the epitaxial growth configurations applicable to all conventional semiconductor materials. The model is experimentally verified by demonstrating the growth of vertically aligned GaAs nanowires on graphite and few-layer graphene by the self-catalyzed vapor-liquid-solid technique using molecular beam epitaxy.

Effects of substrate annealing on the gold-catalyzed growth of ZnO nanostructures.

The effects of thermal substrate pretreatment on the growth of Au-catalyzed ZnO nanostructures by pulsed laser deposition are investigated. C-plane sapphire substrates are annealed prior to deposition of a thin Au layer. Subsequent ZnO growths on substrates annealed above 1,200°C resulted in a high density of nanosheets and nanowires, whereas lower temperatures led to low nanostructure densities.

Engineering parallel and perpendicular polarized photoluminescence from a single semiconductor nanowire by crystal phase control.

We report on a crystal phase-dependent photoluminescence (PL) polarization effect in individual wurtzite GaAs nanowires with a zinc blende GaAsSb insert grown by Au-assisted molecular beam epitaxy. The PL emission from the zinc blende GaAsSb insert is strongly polarized along the nanowire axis while the emission from the wurtzite GaAs nanowire is perpendicularly polarized. The results indicate that the crystal phases, through optical selection rules, are playing an important role in the alignment of the PL polarization in nanowires besides the linear polarization induced by the dielectric mismatch.

Growth and characterization of wurtzite GaAs nanowires with defect-free zinc blende GaAsSb inserts.

We have demonstrated the growth of a unique wurtzite (WZ) GaAs nanowire (NW) with a zinc blende (ZB) GaAsSb insert by Au-assisted molecular beam epitaxy. An abrupt interface from the WZ GaAs phase to the ZB GaAsSb phase was observed, whereas an intermediate segment of a 4H polytype GaAs phase was found directly above the ZB GaAsSb insert. A possible mechanism for the different phase transitions is discussed.