Physical exercise impacts bone remodeling around bio-resorbable magnesium implants.

Physical exercise has been shown to induce positive reactions in bone healing but next to nothing is known about how it affects the nanostructure, in particular around implants. In this study, we established this link by using small-angle X-ray scattering tensor tomography (SASTT) to investigate nanostructural parameters in 3D such as mineral particle orientation and thickness. As a model system, rat femoral bone with a bio-resorbable implant (ultra-high purity magnesium) was used.

Metal-Insulator Transition of Ultrathin Sputtered Metals on Phenolic Resin Thin Films: Growth Morphology and Relations to Surface Free Energy and Reactivity.

Nanostructured metal assemblies on thin and ultrathin polymeric films enable state of the art technologies and have further potential in diverse fields. Rational design of the structure-function relationship is of critical importance but aggravated by the scarcity of systematic studies. Here, we studied the influence of the interplay between metal and polymer surface free energy and reactivity on the evolution of electric conductivity and the resulting morphologies.

Solvent-Free Ultrasonic Dispersion of Nanofillers in Epoxy Matrix.

Dispersion of carbon nanotubes and carbon nanofibers is a crucial processing step in the production of polymer-based nanocomposites and poses a great challenge due to the tendency of nanofillers to agglomerate. One of the most effective methods for dispersion is the use of a three-roll mill, which is a well-established method and results in agglomerates below 5 µm. Nevertheless, this process is time-consuming and thus a limiting factor for industrial applications.

CoCrMo surface modifications affect biocompatibility, adhesion, and inflammation in human osteoblasts.

In this study, different surface modifications were performed on a Cobalt-Chrome-Molybdenum (CoCrMo) alloy and the effects on cell viability and cytotoxicity as well as the adhesion potential of human osteoblasts (hFOB) and their inflammation reaction were investigated in vitro. CoCrMo discs were coated with TiN, with polished and porous coated surfaces, or with pure titanum (cpTi) surfaces and examined by Scanning Electron Microscopy to evaluate surface modifications. In vitro cell viability, adhesion behaviour, and expression of inflammation markers of hFOB human osteoblasts were measured via CellTiter-Glo, CytoTox, ELISA, and RT-PCR respectively.

Insight into the nanostructure of anisotropic cellulose aerogels upon compression.

Cellulose II aerogels are a highly porous class of biobased ultra-light-weight materials. They consist of interlinked networks of loosely aggregated cellulose fibrils. The latter typically have random orientation due to spontaneous phase separation triggered by addition of antisolvent to moleculardisperse cellulose solutions.

High-resolution large-area imaging of nanoscale structure and mineralization of a sclerosing osteosarcoma in human bone.

Osteosarcoma is the most common primary bone cancer type in humans. It is predominantly found in young individuals, with a second peak later in life. The tumour is formed by malignant osteoblasts and consists of collagenous, sometimes also mineralized, bone matrix.

Vacuum Casting and Mechanical Characterization of Nanocomposites from Epoxy and Oxidized Multi-Walled Carbon Nanotubes.

Sample preparation is an important step when testing the mechanical properties of materials. Especially, when carbon nanotubes (CNT) are added to epoxy resin, the increase in viscosity complicates the casting of testing specimens. We present a vacuum casting approach for different geometries in order to produce specimens from functional nanocomposites that consist of epoxy matrix and oxidized multi-walled carbon nanotubes (MWCNTs).

Acid Free Oxidation and Simple Dispersion Method of MWCNT for High-Performance CFRP.

Carbon nanotubes (CNT) provide an outstanding property spectrum which can be used to improve a wide range of materials. However, the transfer of properties from the nanoscale to a macroscopic material is a limiting factor. Different approaches of functionalizing the surface of a CNT can improve the interaction with the surrounding matrix but is connected to difficult and expensive treatments, which are usually inconvenient for industrial applications.

Self-Assembly of Cellulose in Super-Cooled Ionic Liquid under the Impact of Decelerated Antisolvent Infusion: An Approach toward Anisotropic Gels and Aerogels.

Assembly of (bio)polymers into long-range anisotropic nanostructured gels and aerogels is of great interest in advanced material engineering since it enables directional tuning of properties, such as diffusivity, light, heat, and sound propagation, cell proliferation, and mechanical properties. Here we present an approach toward anisotropic cellulose II gels and aerogels that employs specific diffusion and phase separation phenomena occurring during decelerated infusion of an antisolvent into isotropic supercooled solutions of cellulose in an ionic liquid to effectuate supramolecular assembly of cellulose in anisotropic colloidal network structures. At the example of the distillable ionic liquid 1,1,3,3-tetramethylguanidinium acetate, the antisolvent ethanol, and spherocylindrical porous molds, we demonstrate that the proposed facile, environmental-benign and versatile route affords gels and aerogels whose specific anisotropic nanomorphology and properties reflect the preferred supramolecular cellulose orientation during phase separation, which is perpendicular to the direction of antisolvent diffusion.

Antibody adsorption in protein-A affinity chromatography - in situ measurement of nanoscale structure by small-angle X-ray scattering.

Protein-A chromatography is the most widely used chromatography step in downstream processing of antibodies. A deeper understanding of the influence of the surface topology on a molecular/nanoscale level on adsorption is essential for further improvement. It is not clear if the binding is homogenous throughout the entire bead network.

µXRF Elemental Mapping of Bioresorbable Magnesium-Based Implants in Bone.

This study investigated the distribution of the elemental constituents of Mg-based implants at various stages of the degradation process in surrounding bone tissue, with a focus on magnesium (Mg), as the main component of the alloy, and yttrium (Y), due to its potential adverse health effects. The measurements were performed on the implant-bearing thin sections of rat bone in a time series of implant degradation between one and 18 months. Micro X-ray fluorescence analysis (μXRF) with a special spectrometer meeting the requirements for the measurements of low-Z elements was used.

Impact of selected solvent systems on the pore and solid structure of cellulose aerogels.

The impact of selected cellulose solvent systems based on the principal constituents tetrabutylammonium fluoride (TBAF), 1-ethyl-3-methyl-1-imidazolium-acetate, -methylmorpholine--oxide, or calcium thiocyanate octahydrate (CTO) on the properties of cellulose II aerogels prepared from these solvent systems has been investigated as a means towards tailoring cellulose aerogel properties with respect to specific applications. Cotton linters were used as representative plant cellulose. Cellulose was coagulated from solutions with comparable cellulose content, and dried with supercritical carbon dioxide after solvent exchange.

Carbon Microparticles from Organosolv Lignin as Filler for Conducting Poly(Lactic Acid).

Carbon microparticles were produced from organosolv lignin at 2000 °C under argon atmosphere following oxidative thermostabilisation at 250 °C. Scanning electron microscopy, X-ray diffraction, small-angle X-ray scattering, and electro-conductivity measurements revealed that the obtained particles were electrically conductive and were composed of large graphitic domains. Poly(lactic acid) filled with various amounts of lignin-derived microparticles showed higher tensile stiffness increasing with particle load, whereas strength and extensibility decreased.

Core-Shell Structure of Monodisperse Poly(ethylene glycol)-Grafted Iron Oxide Nanoparticles Studied by Small-Angle X-ray Scattering.

The promising applications of core-shell nanoparticles in the biological and medical field have been well investigated in recent years. One remaining challenge is the characterization of the structure of the hydrated polymer shell. Here we use small-angle X-ray scattering (SAXS) to investigate iron oxide core-poly(ethylene glycol) brush shell nanoparticles with extremely high polymer grafting density.

Halogenated veneers: protein cross-linking and halogenation in the jaws of nereis, a marine polychaete worm.

Mineralized tissues are produced by most living organisms for load and impact functions. In contrast, the jaws of the clam worm, Nereis, are hard without mineralization. However, they are peculiarly rich in halogens, which are associated with a variety of post-translationally modified amino acids, many of which are multiply halogenated by chlorine, bromine, and/or iodine.

Exploring molecular and mechanical gradients in structural bioscaffolds.

Most organisms consist of a functionally adaptive assemblage of hard and soft tissues. Despite the obvious advantages of reinforcing soft protoplasm with a hard scaffold, such composites can lead to tremendous mechanical stresses where the two meet. Although little is known about how nature relieves these stresses, it is generally agreed that fundamental insights about molecular adaptation at hard/soft interfaces could profoundly influence how we think about biomaterials.

Zinc and mechanical prowess in the jaws of Nereis, a marine worm.

Higher animals typically rely on calcification to harden certain tissues such as bones and teeth. Some notable exceptions can be found in invertebrates: The fangs, teeth, and mandibles of diverse arthropod species have been reported to contain high levels of zinc. Considerable quantities of zinc also occur in the jaws of the marine polychaete worm Nereis sp.

Electrochemical synthesis of nanostructured ZnO films utilizing self-assembly of surfactant molecules at solid-liquid interfaces.

An electrochemical synthesis strategy for the production of nanostructured films was developed by combining self-assembly of surfactant-inorganic aggregates at solid-liquid interfaces and an electrodeposition process. Through this approach high quality nanostructured ZnO films were cathodically deposited from a plating solution containing 0.1 wt % of sodium dodecyl sulfate (SDS).

High abrasion resistance with sparse mineralization: copper biomineral in worm jaws.

Biominerals are widely exploited to harden or stiffen tissues in living organisms, with calcium-, silicon-, and iron-based minerals being most common. In notable contrast, the jaws of the marine bloodworm Glycera dibranchiata contain the copper-based biomineral atacamite [Cu2(OH)3Cl]. Polycrystalline fibers are oriented with the outer contour of the jaw.