A co-fermentation strategy with wood hydrolysate and crude glycerol to enhance the lipid accumulation in Rhodosporidium toruloides-1588.

Wood hydrolysate has been regarded as sustainable and renewable substrate to produce microbial lipids, a potential feedstock for the biodiesel industry. Moreover, the major by-product of biofuel industries is crude glycerol but its implementation as a carbon source is still constrained due to the presence of impurities resulting in low biomass production and low lipid titer. Thus, this study investigates the effect of different carbon ratios of hydrolysate and crude glycerol on R.

Furfural degradation and its effect on Rhodosporidium toruloides-1588 during microbial growth and lipid accumulation.

The presence of furfural in the hydrolysates obtained from lignocellulosic biomass sources represents an enormous challenge during their fermentation because furfural is a toxic compound for different microorganisms. Rhodosporidium toruloides-1588 can grow and accumulate lipids using wood hydrolysate as a substrate containing up to 1 g/L of furfural. In this study, the capacity of R.

Effect of creating a fed-batch like condition using carbon to nitrogen ratios on lipid accumulation in Rhodosporidium toruloides-1588.

Utilizing the undetoxified wood hydrolysate to accumulate maximum lipids in Rhodosporidium toruloides under optimum conditions has been regarded as a renewable and cost-effective strategy. The current investigation aims to identify the best carbon to nitrogen (C/N 20, 70, and 120) ratio for maximum lipid accumulation in R. toruloides-1588 using wood hydrolysate.

Pulsed-ozonolysis assisted oxidative treatment of forestry biomass for lignin fractionation.

Lignocellulosic biomass has been used to produce biomolecules of industrial interest through thermochemical, biological, and chemical transformation. However, few works have been developed over lignin fractionation to obtain monolignols with commercial potentials, such as sinapyl, coniferyl, and p-coumaryl alcohols. This study is focused on developing a thermochemical method to delignify biomass.

Physical and biological removal of Microcystin-LR and other water contaminants in a biofilter using Manganese Dioxide coated sand and Graphene sand composites.

Sand as a filter media is often challenged by the presence of organics in the form of natural organic matter, metal ions, and various micropollutants in the source water. It is mainly due to the presence of limited active adsorption sites and low surface area that governs an ineffective adsorption potential of the sand material. Herein, graphitized sand was synthesized to tackle the above limitations using two sugar solution sources: a) brewery effluent (as a low-cost solution) (GS1) and; b) sucrose solution (GS2).

Data set of green extraction of valuable chemicals from lignocellulosic biomass using microwave method.

Lignocellulosic biomass is a promising alternative for the replacement of limited fossil resources to produce various chemical compounds, such as 5-hydroxymethylfurfural, furfural, vanillin, vanillic acid, ferulic acid, syringaldehyde, and 4-aminobenzoic acid. However, the complex biomass structure is a limitation to making effective use of this naturally found feedstock. This research presents a data set of different compounds obtained directly from forest residues, with special emphasis on achieving effective utilization of the biomass.

Microwave-assisted extraction of chitosan from Rhizopus oryzae NRRL 1526 biomass.

Microwave-assisted extraction (MAE) of chitosan from dried fungal biomass of Rhizopus oryzae NRRL1526, obtained by culturing on potato dextrose broth (PDB), was performed and the optimal conditions required were identified using statistical analysis for the first time in this study. This microwave-assisted extraction (MAE) was compared against the conventional autoclave assisted method of chitosan extraction. The full factorial experimental design was used to investigate the impact of operating parameters of MAE, microwave power (100 W-500 W), and duration (10 min-30 min), on alkaline insoluble material (AIM) yield, chitosan yield, and degree of deacetylation (DDA).

Bioproduction of fumaric acid: an insight into microbial strain improvement strategies.

Fumaric acid (FA), a metabolic intermediate, has been identified as an important carbohydrate derived platform chemical. Currently, it is commercially sourced from petrochemicals by chemical conversion. The shift to biochemical synthesis has become essential for sustainable development and for the transition to a biobased economy from a petroleum-based economy.

Agro-industrial residues as a unique support in a sand filter to enhance the bioactivity to remove microcystin-Leucine aRginine and organics.

In the past, the versatility of a biosand filter has been successfully checked to counter suspended solids, metals, dissolved organic carbon (DOC), coliforms and other water quality parameters (WQPs) from the drinking water sources. In this study, cyanotoxin in the form of microcystin-LR (MC-LR) along with above-mentioned WQPs including nitrate, nitrite, and ammonia are analyzed for their removal using agro-residue based biosand filters (ARSFs) for 49 days (7 cycles). Three different agro-residue materials (ARMs) viz.

Potential of biological approaches for cyanotoxin removal from drinking water: A review.

Biological treatment of cyanotoxins has gained much importance in recent decades and holds a promise to work in coordination with various physicochemical treatments. In drinking water treatment plants (DWTPs), effective removal of cyanotoxins with reduced toxicity is a primary concern. Commonly used treatments, such as ozonation, chlorination or activated carbon, undergo significant changes in their operating conditions (mainly dosage) to counter the variation in different environmental parameters, such as pH, temperature, and high cyanotoxin concentration.

Biodegradation of microcystin-LR using acclimatized bacteria isolated from different units of the drinking water treatment plant.

Bacterial community isolated from different units of a Drinking Water Treatment Plant (DWTP) including pre-ozonation unit (POU), the effluent-sludge mixture of the sedimentation unit (ESSU) and top-sand layer water sample from the filtration unit (TSFU) were acclimatized separately in the microcystin-leucine arginine (MC-LR)-rich environment to evaluate MC-LR biodegradation. Maximum biodegradation efficiency of 97.2 ± 8.

Production and characterization of novel hydrocarbon degrading enzymes from Alcanivorax borkumensis.

This study investigates the production of alkane hydroxylase, lipase and esterase by the marine hydrocarbon degrading bacteria Alcanivorax borkumensis. The focus of this study is the remediation of petroleum hydrocarbons, hexane, hexadecane and motor oil as model substrates. A.

Tetracyclines metal complexation: Significance and fate of mutual existence in the environment.

Concern over tetracyclines (TCs) complexation with metals in the environment is growing as a new class of emerging contaminants. TCs exist as a different net charged species depending on their dissociation constants, pH and the surrounding environment. One of the key concerns about TCs is its strong tendency to interact with various metal ions and form metal complexes.

Genetic Engineering Strategies for Enhanced Biodiesel Production.

The focus on biodiesel research has shown a tremendous growth over the last few years. Several microbial and plant sources are being explored for the sustainable biodiesel production to replace the petroleum diesel. Conventional methods of biodiesel production have several limitations related to yield and quality, which led to development of new engineering strategies to improve the biodiesel production in plants, and microorganisms.

Structural stability and unfolding properties of cutinases from Thermobifida fusca.

A comparative analysis of the structural and functional aspects along with equilibrium unfolding of two homologous cutinases, Cut1 and Cut2, from Thermobifida fusca was carried out. The CD and fluorescence profile at different pH in the range of 6 to 9 showed no structural variations for both cutinases, indicating their stability to a wide range of pH. Tryptophan quenching studies suggested that all the four Trp residues in the protein are in inaccessible hydrophobic pockets.

Novel cutinase from Pseudomonas cepacia NRRL B 2320: purification, characterization and identification of cutinase encoding genes.

An extracellular cutinase from Pseudomonas cepacia NRRL B 2320 was purified to apparent homogeneity. Upon biochemical characterization, the purified cutinase was found to be tolerant to organic solvents and surfactants under assay conditions. The molecular mass of cutinase was found to be 26.

Production optimization and characterization of recombinant cutinases from Thermobifida fusca sp. NRRL B-8184.

Two genes, cut1 and cut2, of Thermobifida fusca NRRL B-8184 with cutin-hydrolyzing activity were cloned and expressed in Escherichia coli BL21 (DE3) separately. Enhanced expression was achieved after screening of six different media, optimization of the culture conditions and medium components. Among the screened media, modified Terrific Broth was found to be the best for maximum production of recombinant cutinases in E.