Skeletal muscle regeneration with 3D bioprinted hyaluronate/gelatin hydrogels incorporating MXene nanoparticles.

There has been significant progress in the field of three-dimensional (3D) bioprinting technology, leading to active research on creating bioinks capable of producing structurally and functionally tissue-mimetic constructs. TiCT MXene nanoparticles (NPs), promising two-dimensional nanomaterials, are being investigated for their potential in muscle regeneration due to their unique physicochemical properties. In this study, we integrated MXene NPs into composite hydrogels made of gelatin methacryloyl (GelMA) and hyaluronic acid methacryloyl (HAMA) to develop bioinks (namely, GHM bioink) that promote myogenesis.

Recent Advances in Marine Biomaterials Tailored and Primed for the Treatment of Damaged Soft Tissues.

The inherent self-repair abilities of the body often fall short when it comes to addressing injuries in soft tissues like skin, nerves, and cartilage. Tissue engineering and regenerative medicine have concentrated their research efforts on creating natural biomaterials to overcome this intrinsic healing limitation. This comprehensive review delves into the advancement of such biomaterials using substances and components sourced from marine origins.

3D printed membranes of polylactic acid and graphene oxide for guided bone regeneration.

We fabricated graphene oxide (GO)-incorporated polylactic acid (PLA) (GO-PLA) films by using three-dimensional (3D) printing to explore their potential benefits as barrier membranes for guided bone regeneration (GBR). Our results showed that the 3D printed GO-PLA films provided highly favorable matrices for preosteoblasts and accelerated new bone formation in rat calvarial bone defect models.

Towards a biomarker for acute arterial thrombosis using complete blood count and white blood cell differential parameters in mice.

There is no blood biomarker diagnostic of arterial thrombosis. We investigated if arterial thrombosis per se was associated with alterations in complete blood count (CBC) and white blood cell (WBC) differential count in mice. Twelve-week-old C57Bl/6 mice were used for FeCl-mediated carotid thrombosis (n = 72), sham-operation (n = 79), or non-operation (n = 26).

Role of Graphene Family Nanomaterials in Skin Wound Healing and Regeneration.

Owing to astonishing properties such as the large surface area to volume ratio, mechanical stability, antimicrobial property, and collagen crosslinking, graphene family nanomaterials (GFNs) have been widely used in various biomedical applications including tissue regeneration. Many review literatures are available to compile the role of GFNs in cardiac, bone, and neuronal tissue regeneration. However, the contribution of GFNs in skin wound healing and tissue regeneration was not yet discussed.

Functional Graphene Nanomaterials-Based Hybrid Scaffolds for Osteogenesis and Chondrogenesis.

With the emerging trends and recent advances in nanotechnology, it has become increasingly possible to overcome current hurdles for bone and cartilage regeneration. Among the wide type of nanomaterials, graphene (G) and its derivatives (graphene-based materials, GBMs) have been highlighted due to the specific physicochemical and biological properties. In this review, we present the recent development of GBM-based scaffolds for bone and cartilage engineering, focusing on the formulation/shape/size-dependent characteristics, types of scaffold and modification, biocompatibility, bioactivity and underlying mechanism, drawback and prospect of each study.

Potential of Carbon-Based Nanocomposites for Dental Tissue Engineering and Regeneration.

While conventional dental implants focus on mechanical properties, recent advances in functional carbon nanomaterials (CNMs) accelerated the facilitation of functionalities including osteoinduction, osteoconduction, and osseointegration. The surface functionalization with CNMs in dental implants has emerged as a novel strategy for reinforcement and as a bioactive cue due to their potential for mechanical reinforcing, osseointegration, and antimicrobial properties. Numerous developments in the fabrication and biological studies of CNMs have provided various opportunities to expand their application to dental regeneration and restoration.

Spontaneously promoted osteogenic differentiation of MC3T3-E1 preosteoblasts on ultrathin layers of black phosphorus.

Recently, black phosphorus (BP) has garnered great attention as one of newly emerging two-dimensional nanomaterials. Especially, the degraded platelets of BP in the physiological environment were shown to be nontoxic phosphate anions, which are a component of bone tissue and can be used for mineralization. Here, our study presents the potential of BP as biofunctional and biocompatible nanomaterials for the application to bone tissue engineering and regeneration.

Short-Term Cessation of Dabigatran Causes a Paradoxical Prothrombotic State.

Objective: It is unclear if stopping treatment with dabigatran, a new oral anticoagulant (NOAC), induces a paradoxical rebound prothrombotic state. We investigated if short-term (1-3 days) dabigatran cessation is associated with a higher thrombus volume than expected from a simple reversal of the anticoagulant effect.

Methods: Ten-week-old C57Bl/6 mice (n = 338) received one of the following oral treatments: phosphate-buffered saline (PBS), dabigatran for 7 days with or without 1 to 4 day cessation, and aspirin in either a single dose or daily for 7 days.

Synthesis of Monolayer Gold Nanorings Sandwich Film and Its Higher Surface-Enhanced Raman Scattering Intensity.

Most previous studies relating to surface-enhanced Raman spectroscopy (SERS) signal enhancement were focused on the interaction between the light and the substrate in the - axis. 3D SERS substrates reported in the most of previous papers could contribute partial SERS enhancement via axis, but the increases of the surface area were the main target for those reports. However, the axis is also useful in achieving improved SERS intensity.

Effects of exercise training and detraining on atheromatous matrix metalloproteinase activity in mice.

Background And Aims: Exercise training (ET) helps treat atherosclerosis. However, many patients stop regular ET for various reasons. The effect of detraining on atherosclerosis is not well studied.

Dual-Modal Imaging-Guided Precise Tracking of Bioorthogonally Labeled Mesenchymal Stem Cells in Mouse Brain Stroke.

Noninvasive and precise stem cell tracking after transplantation in living subject is very important to monitor both stem cell destinations and their fate, which is closely related to their therapeutic efficacy. Herein, we developed bicyclo[6.1.

Synthesis of octahedral gold tip-blobbed nanoparticles and their dielectric sensing properties.

Site-selective synthesis of nanostructures is an important topic in the nanoscience community. Normally, the difference between seeds and deposition atoms in terms of crystallinity triggers the deposition atoms to grow initially at the specific site of nucleation. It is more challenging to control the deposition site of atoms that have the same composition as the seeds because the atoms tend to grow epitaxially, covering the whole surface of the seed nanoparticles.

Bimetallic junction mediated synthesis of multilayer graphene edges towards ultrahigh capacity for lithium ion batteries.

In this work, we report on a novel strategy to synthesize high-density graphene edges on a vertically-aligned nanorod array substrate based on multiple segmented Ni-Au units. The growth of graphene layers on Ni and Au was performed by chemical vapor deposition (CVD) leading to the effective generation of edge-rich multilayer graphene due to the distinct carbon solubility. The composite material was applied as an anode in a lithium ion battery (LIB) whose discharging capacity was found to closely depend on the total number of Ni-Au junctions within the vertical nanorods.

Fourier Transform Surface Plasmon Resonance (FTSPR) with Gyromagnetic Plasmonic Nanorods.

An unprecedented active and dynamic sensing platform based on a LSPR configuration that is modulated by using an external magnetic field is reported. Electrochemically synthesized Au/Fe/Au nanorods exhibited plasmonically active behavior through plasmonic coupling, and the middle ferromagnetic Fe block responded to a magnetic impetus, allowing the nanorods to be modulated. The shear force variation induced by the specific binding events between antigens and antibodies on the nanorod surface is used to enhance the sensitivity of detection of antigens in the plasmonics-based sensor application.

Cytokine Response to Diet and Exercise Affects Atheromatous Matrix Metalloproteinase-2/9 Activity in Mice.

Background: The aim of this study is to identify the principal circulating factors that modulate atheromatous matrix metalloproteinase (MMP) activity in response to diet and exercise.

Methods and results: Apolipoprotein-E knock-out (ApoE) mice (n=56) with pre-existing plaque, fed either a Western diet (WD) or normal diet (ND), underwent either 10 weeks of treadmill exercise or had no treatment. Atheromatous MMP activity was visualized using molecular imaging with a MMP-2/9 activatable near-infrared fluorescent (NIRF) probe.

A close-packed 3D plasmonic superlattice of truncated octahedral gold nanoframes.

We report the surface-enhanced Raman scattering (SERS) enhancement of three-dimensional (3D) close-packed plasmonic superlattices of truncated octahedral gold nanostructures. Experimentally, we resolved two different types of hot spots, one originates from the face-to-face contacts and the other is from the edge-to-edge contacts among the 3D close-packed plasmonic superlattice of gold nanostructures. The high degree of homogeneity of truncated octahedral Au@Pt nanoparticles (TOh Au@Pt NPs) and truncated octahedral Pt@Au nanoframes (TOh Pt@Au NFs) allowed them to self-assemble into remarkable 3D close-packed plasmonic superlattices.

Quantitative Imaging of Cerebral Thromboemboli In Vivo: The Effects of Tissue-Type Plasminogen Activator.

Background And Purpose: Quantitative imaging for the noninvasive assessment of thrombolysis is needed to advance basic and clinical thrombosis-related research and tailor tissue-type plasminogen activator (tPA) treatment for stroke patients. We quantified the evolution of cerebral thromboemboli using fibrin-targeted glycol chitosan-coated gold nanoparticles and microcomputed tomography, with/without tPA therapy.

Methods: We injected thrombi into the distal internal carotid artery in mice (n=50).

Green-channel autofluorescence imaging: A novel and sensitive technique to delineate infarcts.

Background: We have found that infarcted brain regions exhibit green channel autofluorescence (GCAF). Here, we compare ex vivo GCAF-imaging with 2,3,5-triphenylteterazolium chloride (TTC)-staining.

New Method: C57BL/6 mice (n=120) underwent GCAF-imaging after transient or permanent middle cerebral artery occlusion (tMCAO or pMCAO).

Interfacial double layer mediated electrochemical growth of thin-walled platinum nanotubes.

This work demonstrates that thin-walled platinum nanotubes can be readily synthesized by controlling the interfacial double layer in alumina nanochannels. The gradient distribution of ions in nanochannels enables the creation of Pt nanotubes with walls as thin as 5 nm at the top end when using a solution containing polyvinylpyrrolidone (PVP) and chloroplatinic acid (HPtCl) under the influence of an electric potential in nanochannels. The highly efficient formation of thin-walled Pt nanotubes is a result of the concentration gradient of [Formula: see text] and a thick double layer, which was caused by the low concentration of Pt precursors and the enhanced surface charge density induced by protonated PVP steric adsorption.

Component conversion from pure Au nanorods to multiblock Ag-Au-Ag nanorods assisted by Pt nanoframe templates.

We developed a new method for synthesizing multiblock Ag-Au-Ag nanorods using Pt nanoframes that had been deposited on the edges of Au nanorod seeds. As a function of Au etching time, the length of the Au nanorod decreased symmetrically starting from the two ends, leading to the formation of empty inner space at the ends. Subsequent reduction of Ag ions could be selectively performed in the inner space confined by Pt nanoframes and the resulting Ag-Au-Ag nanorods exhibited characteristic LSPR modes originating from each block component (in a transverse direction) and SPR coupling (in a longitudinal direction).

Synthesis and optical property characterization of elongated AuPt and Pt@Au metal nanoframes.

We report a facile method to synthesize elongated nanoframes consisting of Pt and Au in solution. Pentagonal Au nanorods served as templates and successfully led to an elongated AuPt nanoframe after etching the core Au. Subsequently, the coating of Au around Pt ridges resulted in Pt@Au metal nanoframes.

Octahedral and Cubic Gold Nanoframes with Platinum Framework.

Herein, we report a general synthetic pathway to various shapes of three-dimensional (3D) gold nanoframes (NFs) embedded with a Pt skeleton for structural rigidity. The synthetic route comprises three steps: site-specific (edge and vertex) deposition of Pt, etching of inner Au, and regrowth of Au on the Pt framework. Site-specific reduction of Pt on Au nanoparticles (NPs) led to the high-quality of 3D Au NFs with good structural rigidity, which allowed the detailed characterization of the corresponding 3D metal NFs.