Development and structural comparison of alkaline and organosolv coconut husks lignin as an eco-friendly lignin-phenol-glyoxal (LPG) wood adhesives.

The development of eco-friendly wood adhesives have gained more interest among adhesives industries due to the concerns about using carcinogenic formaldehyde and petroleum-based phenol in commercially available adhesives. Therefore, many studies have been done by using lignin to partially replace phenol and completely substitute formaldehyde with non-toxic glyoxal in a wood adhesive formulation. This study focused on using different percentages of lignin substitution (10 %, 30 % and 50 wt%) of alkaline and organosolv coconut husk lignin into soda lignin-phenol-glyoxal (SLPG), Kraft lignin-phenol-glyoxal (KLPG) and organosolv lignin-phenol-glyoxal (OLPG) adhesives.

A comprehensive review of lignin-reinforced lignocellulosic composites: Enhancing fire resistance and reducing formaldehyde emission.

The rising environmental concerns and the growing demand for renewable materials have surged across various industries. In this context, lignin, being a plentiful natural aromatic compound that possesses advantageous functional groups suitable for utilization in biocomposite systems, has gained notable attention as a promising and sustainable alternative to fossil-derived materials. It can be obtained from lignocellulosic biomass through extraction via various techniques, which may cause variability in its thermal, mechanical, and physical properties.

Potential of water-soluble chitosan Schiff bases extracted from Metapenaeus dobsoni shells as effective corrosion inhibitors.

Corrosion causes significant economic losses and structural failures in industries, highlighting the need for eco-friendly inhibitors. Chitosan (CS), a biodegradable and non-toxic biopolymer, shows potential, though its limited water solubility restricts its applications. To overcome this challenge, this study presents the synthesis of two water-soluble chitosan Schiff bases (CSBs) derived from the shells of Metapenaeus dobsoni (M.

Development of a Lignin-Based Carrier - Citronella Oil Nanoemulsion and Its Utilization as an Herbicide against Specific Weed Species.

This research aims to create an emulsion formulation utilizing lignin as a carrier and citronella oil for its application as a herbicide. The formulation composition includes lignin solution 55-62 %v/v, Tween 80 25 %w/v, propylene glycol 10 %w/v, and citronella oil 3-10 %w/v. The preparation steps involve preparing the oil phase by mixing tween 80 surfactant, propylene glycol, and citronella oil; preparing the aqueous phase by mixing lignin into distilled water at pH 12 with stirring; mixing the oil phase and the water phase accompanied by stirring at 5000-10000 rpm for 1-5 minutes until a stable solution is formed as a natural herbicide.

Biopolymer-based beads for the adsorptive removal of organic pollutants from wastewater: Current state and future perspectives.

Among biopolymer-based adsorbents, composites in the form of beads have shown promising results in terms of high adsorption capacity and ease of separation from the effluents. This review addresses the potential of biopolymer-based beads to remediate wastewaters polluted with emerging organic contaminants, for instance dyes, active pharmaceutical ingredients, pesticides, phenols, oils, polyaromatic hydrocarbons, and polychlorinated biphenyls. High adsorption capacities up to 2541.

A comprehensive review on processing, characteristics, and applications of cellulose nanofibrils/graphene hybrid-based nanocomposites: Toward a synergy between two-star nanomaterials.

Nanostructured materials are fascinating since they are promising for intensely enhancing materials' performance, and they can offer multifunctional features. Creating such high-performance nanocomposites via effective and mild approaches is an inevitable requirement for sustainable materials engineering. Nanocomposites, which combine two-star nanomaterials, namely, cellulose nanofibrils (CNFs) and graphene derivatives (GNMs), have recently revealed interesting physicochemical properties and excellent performance.

Oil palm frond-derived cellulose nanocrystals: Effect of pretreatment and elucidating its reinforcing potential in hydrogel beads.

Herein, cellulose nanocrystals were synthesized from oil palm fronds (CNC-OPF) involving two pretreatment approaches, viz. autohydrolysis and soda pulping. The pretreatments were applied individually to OPF fibers to assess their influence on CNCs' physicochemical and thermal properties.

Structural characterization of modified coconut husk lignin via steam explosion pretreatment as a renewable phenol substitutes.

The effects of steam explosion (SE) pretreatment on the structural properties of lignin isolated from coconut husk (CH) biomass via soda pulping were investigated in this work. The isolated SE lignin was classified as dilute acid impregnation SE lignin (ASEL), water impregnation SE lignin (WSEL), and 2-naphthol impregnation SE lignin (NSEL). The various types of functional groups isolated from SE lignin were characterized and compared using a variety of complementary analyses: FTIR spectroscopy, NMR spectroscopy, GPC chromatography, HPAEC-PAD chromatography and thermal analyses.

Conversion of archeological iron rust employing coconut husk lignin.

Rust powder collected from an archeological iron was evaluated by complementary analyses such as FTIR, XRD, XRF, and SEM/EDX. The analyses revealed that lepidocrocite (L) was the major component in the archeological iron. Coconut husk (CH) can be classified as a type of lignocellulosic biomass of renewable resources that are widely available, especially in coastal areas.

Simultaneous naphthalene degradation and electricity production in a biowaste-powered microbial fuel cell.

Naphthalene is a very common and hazardous environmental pollutant, and its biodegradation has received serious attention. As demonstrated in this study, naphthalene-contaminated wastewater can be biodegraded using a microbial fuel cell (MFC). Furthermore, the potential of MFC for electricity generation appears to be a promising technology to meet energy demands other than those produced from fossil fuels.

Improved p-chlorophenol adsorption onto copper-modified cellulose nanocrystal-based hydrogel spheres.

The present study intended to develop efficient hydrogel spheres in treating simulated wastewater contaminated with p-chlorophenol. Herein, copper-modified nanocellulose was grafted onto alginate to produce eco-friendly hydrogel spheres to utilize as a viable biosorbent. Fabricated spheres were characterized through scanning electron microscopy, thermogravimetry, surface area measurement, point of zero charge and zeta potential analyses.

Importance of carbon structure for nitrogen and sulfur co-doping to promote superior ciprofloxacin removal via peroxymonosulfate activation.

Herein, five N, S-co-doped carbocatalysts were prepared from different carbonaceous precursors, namely sawdust (SD), biochar (BC), carbon-nanotubes (CNTs), graphite (GP), and graphene oxide (GO) and compared. Generally, as the graphitization degree increased, the extent of N and S doping decreased, graphitic N configuration is preferred, and S configuration is unaltered. As peroxymonosulfate (PMS) activator for ciprofloxacin (CIP) removal, the catalytic performance was in order: NS-CNTs (0.

Cellulose nanofibrils-graphene hybrids: recent advances in fabrication, properties, and applications.

With the fast-developing social economy and the acceleration of industrialization, seeking effective renewable, sustainable, and environmentally friendly resources that show promising properties is an urgent task and a crucial means to achieve sustainable progress in the face of the growing depletion of non-renewable resources and the deterioration of environmental issues. Cellulose nanofibrils (CNFs) are natural polymeric nanomaterials with excellent biocompatibility, biodegradability, good mechanical features, high strength, low density, high specific surface area, and tunable chemistry. Their combination with other nanomaterials, such as graphene derivatives (GNMs), has been demonstrated to be effective since they produce hybrids with outstanding physicochemical properties, tailorable functionality, and high performance.

Graphene and zeolite as adsorbents in bar-micro-solid phase extraction of pharmaceutical compounds of diverse polarities.

A bar micro-solid phase (bar μ-SPE) extraction method using either graphene or zeolite or their mixtures as an adsorbent, coupled with high-performance liquid chromatography (using a C1 column) was developed for the simultaneous determination of pharmaceutical compounds (metformin (MET), buformin (BUF), phenformin (PHEN) and propranolol (PROP)) of diverse polarity (log  from -1.82 to 3.10).

A recent advancement on preparation, characterization and application of nanolignin.

Each year, 50 to 70 million tonnes of lignin are produced worldwide as by-products from pulp industries and biorefineries through numerous processes. Nevertheless, about 98% of lignin is directly burnt to produce steam to generate energy for the pulp mills and only a handful of isolated lignin is used as a raw material for the chemical conversion and for the preparation of various substances as well as modification of lignin into nanomaterials. Thus, thanks to its complex structure, the conversion of lignin to nanolignin, attracting growing attention and generating considerable interest in the scientific community.

Microwave-assisted catalysis of water-glycerol solutions for hydrogen production over NiO/zeolite catalyst.

In this study, glycerol as an abundant green feedstock was used as a hydrogen source to investigate the reaction of water-glycerol solution decomposition by microwave-assisted catalytic to produce hydrogen over NiO/zeolite catalyst. The catalyst was prepared by inception wetness and then characterized through X-ray diffraction (XRD), scanning electron microscopy (SEM), Energy diffraction X-ray (EDX), and transmission electron microscope (TEM) measurements. The conversion process of glycerol into hydrogen was performed in a fixed-bed microwave-assisted reactor.

Preparation and characterization of nanosized lignin from oil palm (Elaeis guineensis) biomass as a novel emulsifying agent.

A study was carried out to determine the effectiveness of lignin, extracted from oil palm (Elaeis guineensis) biomass as water-in-oil (W/O) emulsifying agent. To achieve this goal, soda lignin (SL) was extracted via soda pulping process and a series of nanosized soda lignin (NSL) were prepared using homogenizer at three different speed i.e.

Current advancement on the isolation, characterization and application of lignin.

The most critical issues faced by the world nowadays is to provide the sustainability of consumption for energy and natural resources. Lignin is said to be one of the alternative new discoveries best-suited lignocellulosic biomass due to its low cost, sufficient availability and environmentally safe. The valuable properties exhibited by lignin can give broader applications usage such as in composite materials, wood industries, polymer composite industries, pharmaceutical and corrosion inhibitor industries.

Nanocellulose: From Fundamentals to Advanced Applications.

Over the past few years, nanocellulose (NC), cellulose in the form of nanostructures, has been proved to be one of the most prominent green materials of modern times. NC materials have gained growing interests owing to their attractive and excellent characteristics such as abundance, high aspect ratio, better mechanical properties, renewability, and biocompatibility. The abundant hydroxyl functional groups allow a wide range of functionalizations chemical reactions, leading to developing various materials with tunable features.

Preparation and characterizations of oil palm fronds cellulose nanocrystal (OPF-CNC) as reinforcing filler in epoxy-Zn rich coating for mild steel corrosion protection.

Oil palm frond (OPF) is one of largest contributions to the biomass waste from oil palm plantation. In this work, OPF has been successfully utilized to prepare cellulose nanocrystal (OPF-CNC) by acid hydrolysis. OPF was initially treated with autohydrolysis treatment.

Corrosion inhibition on mild steel in 1 M HCl solution by extracts and three of its constituents (alkaloids).

Corrosion inhibition effect of the crude extracts (hexane, dichloromethane, methanol) from the bark of and three alkaloids named -methylisococlaurine 1, -methyllaurotetanine 2 and atherosperminine 3 isolated from the dichloromethane extract (CNDE) were investigated for mild steel corrosion in 1 M HCl solution. An electrochemical impedance study showed that CNDE and 2 reduced the corrosion significantly through a charge transfer mechanism with inhibition efficiency of 91.05% and 88.

One-step synthesis of chitosan-polyethyleneimine with calcium chloride as effective adsorbent for Acid Red 88 removal.

Chitosan-polyethyleneimine with calcium chloride as ionic cross-linker (CsPC) was synthesized as a new kind of adsorbent using a simple, green and cost-effective technique. The adsorption properties of the adsorbent for Acid Red 88 (AR88) dye, as a model analyte, were investigated in a batch system as the function of solution pH (pH 3-12), initial AR88 concentration (50-500 mg L), contact time (0-24 h), and temperature (30-50 °C). Results showed that the adsorption process obeyed the pseudo-first order kinetic model and the adsorption rate was governed by both intra-particle and liquid-film mechanism.

Effect of extraction methods on the molecular structure and thermal stability of kenaf (Hibiscus cannabinus core) biomass as an alternative bio-filler for rubber composites.

Lignin from kenaf (Hibiscus cannabinus) core was investigated as an alternative filler for rubber. Three types of extraction methods were used to isolate lignin from kenaf, namely kraft, soda and organosolv process. The particle size, surface area, functionalities changes, molecular weight and thermal properties of the lignin were characterized.

Reinforced lignin-phenol-glyoxal (LPG) wood adhesives from coconut husk.

Lignin was extracted from coconut husk via alkaline pulping, either Kraft or soda. The isolated lignin samples were classified as hydroxy-benzaldehyde, vanillin, and syringaldehyde type according to Fourier-transform Infrared Spectroscopy, H and C Nuclear Magnetic Resonance (NMR) spectra. Soda lignin (SL) showed higher thermal stability and glass transition temperature (T) than Kraft lignin (KL) as proven by thermogravimetric analysis (TGA) and differential scanning calorimetry (DSC), respectively.