Four-year clinical evaluation of CAD/CAM indirect resin composite premolar crowns using 3D digital data: Discovering the causes of debonding.

Purpose: To analyze the causes of debonding of computer-aided design/computer-aided manufacturing (CAD/CAM) indirect resin composite premolar crowns with a focus on the morphological factors of the crown and abutment teeth.

Methods: The clinical courses of 109 CAD/CAM indirect resin composite crowns were observed, and the patients' background characteristics, crown locations, luting methods, types of abutments, distal-most/non-distal-most molars, and types of resin blocks were confirmed. To investigate the influence of the morphology of the crown and abutment teeth, the 1) vertical dimension of the abutment teeth, 2) taper, and 3) thickness of the crown occlusal surface during events were measured from the three-dimensional digital data.

Does the bonding effectiveness of a fiber post/resin composite benefit from mechanical or chemical treatment? Seven methods for saliva-contaminated surfaces.

Purpose: This study examined four cleaning methods and three chemical treatments for artificial saliva-contaminated fiber posts in terms of bonding durability to resin composite core materials.

Methods: Non-contaminated fiber posts (Tokuyama FR Post, Tokuyama Dental) and those contaminated (GC Fiber Post, GC) with artificial saliva (Saliveht Aerosol, Teijin Pharma) were used. Washing and drying (WD), alcohol cleaning (AlC), H3PO4 etching (P/WD), alumina blasting (B/D) for decontamination and silanization (Clearfil Ceramic Primer Plus, Kuraray Noritake Dental, Si), resin priming (HC Primer, Shofu, MMA), and bonding resin application (Clearfil Universal Bond Quick, Kuraray Noritake Dental, BR) for chemical treatment were performed.

MDP is effective for removing residual polycarboxylate temporary cement as an adhesion inhibitor.

The effect of cleaner containing 10-methacryloyloxydecyl dihydrogen phosphate (MDP) for removing temporary cement remnants on dentin surface was evaluated. Flat dentin surfaces were wet-polished (Co) and HY-BOND temporary cement hard (Shofu) was applied to the surface. This temporary cement was removed using an air-scaler (Sc), brush (Br), or phosphoric acid and NaOCl (NC).

Adhesion procedures for CAD/CAM indirect resin composite block: A new resin primer versus a conventional silanizing agent.

Purpose: The purpose of this study was to evaluate the effectiveness of both a resin primer containing methyl methacrylate (MMA) and a silanizing agent on bonding to indirect resin composite blocks, using two types of build-up hybrid resin composites.

Methods: SHOFU BLOCK HC (Shofu) specimens were blasted with alumina, after which one of two surface treatments was applied: CERA RESIN BOND (Shofu, the Silane group) or HC primer (Shofu, the MMA group). Resin composites made using either Solidex Hardura (SDH, Shofu) or Ceramage Duo (CMD, Shofu) were built up and micro-tensile bond strength (μTBS) values were measured after storage in water for either 24h or 6 months (n=24 per group).

Effectiveness of pretreatment with phosphoric acid, sodium hypochlorite and sulfinic acid sodium salt on root canal dentin resin bonding.

Purpose: The purpose of this study was to evaluate the effect of pretreatment using phosphoric acid, sodium hypochlorite and sulfinic acid sodium salt on the bonding of one-step self-etching adhesives to root canal dentin.

Methods: Thirty-six single-rooted sound human premolars were randomly assigned into three groups before applying the one-step self-etching adhesive. These comprised a control group with no pretreatment, an NC group that received phosphoric acid and subsequent sodium hypochlorite gel pretreatments, and an NC+AC group that received an additional treatment with sulfinic acid sodium salt following the same pretreatment applied to the NC group.

Effects of three drying methods of post space dentin bonding used in a direct resin composite core build-up method.

Purpose: The purpose of this study was to evaluate drying methods for post space dentin bonding in a direct resin composite core build-up method.

Methods: Experiment 1: Four root canal plastic models, having diameters of 1.0 or 1.

Effectiveness of sodium hypochlorite and sulfinic acid sodium salt treatment on dentin-resin bonding: Long-term durability of one-step self-etching adhesive.

This study aimed to evaluate the effect of sulfinic acid sodium salt interposition after acid and sodium hypochlorite treatment (NC treatment) on dentin bonding durability using a mild type one-step self-etching adhesive. Fifteen human third molars were randomly assigned into three experimental groups according to dentin pretreatment before applying the one-step self-etching adhesive: Cont group, without pretreatment; NC group, pretreatment with phosphoric acid and sodium hypochlorite gel; and NC+AC group, additional treatment with sulfinic acid sodium salt followed by the same pretreatment of the NC group. Microtensile bond strength was measured and the pre-treated dentin surface, fracture modes, and bonding interface were observed.

Bonding effectiveness and multi-interfacial characterization of two direct buildup resin core systems bonded to post-space dentin.

Objectives: The aim of the present study was to evaluate the bonding effectiveness of two resin core buildup systems using conventional methods in the field of adhesive dentistry and a new non-destructive method.

Materials And Methods: Twenty-four single-rooted human teeth were built up with dual-cure one-step self-etch adhesive and composite systems (SY1: Clearfil DC bond and Clearfil DC core automix, SY2: Clearfil bond SE one and Clearfil DC core automix one). The prepared samples were sectioned into approximately 1 × 1-mm-thick beams and subjected to micro-tensile bond strength (μTBS) testing (n = 24).

Surgical Intervention for Masticatory Muscle Tendon-Aponeurosis Hyperplasia Based on the Diagnosis Using the Four-Dimensional Muscle Model.

Objectives: The surgical target of Masticatory muscle tendon-aponeurosis hyperplasia (MMTAH) is the masseter or temporal muscle. In our clinic, the 4-dimentional muscle model (4DMM) has been used to decide if we should approach to the masseter or temporal muscle. The aim of this study is validate the clinical usefulness of 4DMM on the basis of the surgical results.

Nondestructive observation of teeth post core space using optical coherence tomography: a pilot study.

Coronal tooth lesions, such as caries, enamel cracking, and composite resin restoration cavities, have been observed by optical coherence tomography (OCT). This pilot study was performed to verify whether OCT could reveal details of root canals filled with resin core build-up. A dual-cure, one-step, self-etch adhesive system-bonding agent (Clearfil Bond SE ONE, Kuraray Noritake Dental) and dual-cure resin composite core material (Clearfil DC Core Automix ONE, Kuraray Noritake Dental) were used according to the manufacturer's instructions in root canals.