Simultaneous compression and opacity data from time-series radiography with a Lagrangian marker.

Time-resolved radiography can be used to obtain absolute shock Hugoniot states by simultaneously measuring at least two mechanical parameters of the shock, and this technique is particularly suitable for one-dimensional converging shocks where a single experiment probes a range of pressures as the converging shock strengthens. However, at sufficiently high pressures, the shocked material becomes hot enough that the x-ray opacity falls significantly. If the system includes a Lagrangian marker such that the mass within the marker is known, this additional information can be used to constrain the opacity as well as the Hugoniot state.

The laser shock station in the dynamic compression sector. I.

The Laser Shock Station in the Dynamic Compression Sector (DCS) [Advanced Photon Source (APS), Argonne National Laboratory] links a laser-driven shock compression platform with high energy x-ray pulses from the APS to achieve in situ, time-resolved x-ray measurements (diffraction and imaging) in materials subjected to well-characterized, high stress, short duration shock waves. This station and the other DCS experimental stations provide a unique and versatile facility to study condensed state phenomena subjected to shocks with a wide range of amplitudes (to above ∼350 GPa) and time-durations (∼10 ns-1 µs). The Laser Shock Station uses a 100 J, 5-17 ns, 351 nm frequency tripled Nd:glass laser with programmable pulse shaping and focal profile smoothing for maximum precision.

Absolute Equation-of-State Measurement for Polystyrene from 25 to 60 Mbar Using a Spherically Converging Shock Wave.

We have developed an experimental platform for the National Ignition Facility that uses spherically converging shock waves for absolute equation-of-state (EOS) measurements along the principal Hugoniot. In this Letter, we present one indirect-drive implosion experiment with a polystyrene sample that employs radiographic compression measurements over a range of shock pressures reaching up to 60 Mbar (6 TPa). This significantly exceeds previously published results obtained on the Nova laser [R.

Absolute Hugoniot measurements from a spherically convergent shock using x-ray radiography.

The canonical high pressure equation of state measurement is to induce a shock wave in the sample material and measure two mechanical properties of the shocked material or shock wave. For accurate measurements, the experiment is normally designed to generate a planar shock which is as steady as possible in space and time, and a single state is measured. A converging shock strengthens as it propagates, so a range of shock pressures is induced in a single experiment.

X-ray scattering measurements on imploding CH spheres at the National Ignition Facility.

We have performed spectrally resolved x-ray scattering measurements on highly compressed polystyrene at pressures of several tens of TPa (100 Mbar) created by spherically convergent shocks at the National Ignition Facility. Scattering data of line radiation at 9.0 keV were recorded from the dense plasma shortly after shock coalescence.

Dynamic Behavior of Engineered Lattice Materials.

Additive manufacturing (AM) is enabling the fabrication of materials with engineered lattice structures at the micron scale. These mesoscopic structures fall between the length scale associated with the organization of atoms and the scale at which macroscopic structures are constructed. Dynamic compression experiments were performed to study the emergence of behavior owing to the lattice periodicity in AM materials on length scales that approach a single unit cell.

Ultrafast visualization of crystallization and grain growth in shock-compressed SiO2.

Pressure- and temperature-induced phase transitions have been studied for more than a century but very little is known about the non-equilibrium processes by which the atoms rearrange. Shock compression generates a nearly instantaneous propagating high-pressure/temperature condition while in situ X-ray diffraction (XRD) probes the time-dependent atomic arrangement. Here we present in situ pump-probe XRD measurements on shock-compressed fused silica, revealing an amorphous to crystalline high-pressure stishovite phase transition.

Single Hit Energy-resolved Laue Diffraction.

In situ white light Laue diffraction has been successfully used to interrogate the structure of single crystal materials undergoing rapid (nanosecond) dynamic compression up to megabar pressures. However, information on strain state accessible via this technique is limited, reducing its applicability for a range of applications. We present an extension to the existing Laue diffraction platform in which we record the photon energy of a subset of diffraction peaks.

Qualification of a high-efficiency, gated spectrometer for x-ray Thomson scattering on the National Ignition Facility.

We have designed, built, and successfully fielded a highly efficient and gated Bragg crystal spectrometer for x-ray Thomson scattering measurements on the National Ignition Facility (NIF). It utilizes a cylindrically curved Highly Oriented Pyrolytic Graphite crystal. Its spectral range of 7.

Using penumbral imaging to measure micrometer size plasma hot spots in Gbar equation of state experiments on the National Ignition Facility.

We have developed an experimental platform for absolute equation of state measurements up to Gbar pressures on the National Ignition Facility (NIF) within the Fundamental Science Program. We use a symmetry-tuned hohlraum drive to launch a spherical shock wave into a solid CH sphere. Streaked radiography is the primary diagnostic to measure the density change at the shock front as the pressure increases towards smaller radii.

X-ray continuum emission spectroscopy from hot dense matter at Gbar pressures.

We have measured the time-resolved x-ray continuum emission spectrum of ∼30 times compressed polystyrene created at stagnation of spherically convergent shock waves within the Gbar fundamental science campaign at the National Ignition Facility. From an exponential emission slope between 7.7 keV and 8.

Single photon energy dispersive x-ray diffraction.

With the pressure range accessible to laser driven compression experiments on solid material rising rapidly, new challenges in the diagnosis of samples in harsh laser environments are emerging. When driving to TPa pressures (conditions highly relevant to planetary interiors), traditional x-ray diffraction techniques are plagued by increased sources of background and noise, as well as a potential reduction in signal. In this paper we present a new diffraction diagnostic designed to record x-ray diffraction in low signal-to-noise environments.

Strength of shock-loaded single-crystal tantalum [100] determined using in situ broadband x-ray Laue diffraction.

The strength of shock-loaded single crystal tantalum [100] has been experimentally determined using in situ broadband x-ray Laue diffraction to measure the strain state of the compressed crystal, and elastic constants calculated from first principles. The inferred strength reaches 35 GPa at a shock pressure of 181 GPa and is in excellent agreement with a multiscale strength model [N. R.

Powder diffraction from solids in the terapascal regime.

A method of obtaining powder diffraction data on dynamically compressed solids has been implemented at the Jupiter and OMEGA laser facilities. Thin powdered samples are sandwiched between diamond plates and ramp compressed in the solid phase using a gradual increase in the drive-laser intensity. The pressure history in the sample is determined by back-propagation of the measured diamond free-surface velocity.

Nanosecond white-light Laue diffraction measurements of dislocation microstructure in shock-compressed single-crystal copper.

Under uniaxial high-stress shock compression it is believed that crystalline materials undergo complex, rapid, micro-structural changes to relieve the large applied shear stresses. Diagnosing the underlying mechanisms involved remains a significant challenge in the field of shock physics, and is critical for furthering our understanding of the fundamental lattice-level physics, and for the validation of multi-scale models of shock compression. Here we employ white-light X-ray Laue diffraction on a nanosecond timescale to make the first in situ observations of the stress relaxation mechanism in a laser-shocked crystal.

The strength of single crystal copper under uniaxial shock compression at 100 GPa.

In situ x-ray diffraction has been used to measure the shear strain (and thus strength) of single crystal copper shocked to 100 GPa pressures at strain rates over two orders of magnitude higher than those achieved previously. For shocks in the [001] direction there is a significant associated shear strain, while shocks in the [111] direction give negligible shear strain. We infer, using molecular dynamics simulations and VISAR (standing for 'velocity interferometer system for any reflector') measurements, that the strength of the material increases dramatically (to approximately 1 GPa) for these extreme strain rates.

Bragg diffraction using a 100 ps 17.5 keV x-ray backlighter and the Bragg diffraction imager.

A new diagnostic for measuring Bragg diffraction of petawatt-generated high-energy x rays off a laser-compressed crystal was designed and tested successfully at the Omega EP laser facility on static Mo and Ta (111) oriented single crystal samples using a 17.5 keV Mo Kα backlighter. The Bragg diffraction imager consists of a heavily shielded enclosure and a precisely positioned beam block attached to the enclosure by an aluminum arm.

Nanosecond x-ray Laue diffraction apparatus suitable for laser shock compression experiments.

We have used nanosecond bursts of x-rays emitted from a laser-produced plasma, comprised of a mixture of mid-Z elements, to produce a quasiwhite-light spectrum suitable for performing Laue diffraction from single crystals. The laser-produced plasma emits x-rays ranging in energy from 3 to in excess of 10 keV, and is sufficiently bright for single shot nanosecond diffraction patterns to be recorded. The geometry is suitable for the study of laser-shocked crystals, and single-shot diffraction patterns from both unshocked and shocked silicon crystals are presented.

A Seeman-Bohlin geometry for high-resolution nanosecond x-ray diffraction measurements from shocked polycrystalline and amorphous materials.

We report on a focusing x-ray diffraction geometry capable of high-resolution in situ lattice probing from dynamically loaded polycrystalline and amorphous materials. The Seeman-Bohlin-type camera presented here is ideally suited for time-resolved x-ray diffraction measurements performed on high energy multibeam laser platforms. Diffraction from several lattice planes of ablatively shock-loaded 25 mum thick Cu foils was recorded on a focusing circle of diameter D=100 mm with exceptional angular resolution limited only by the spectral broadening of the x-ray source.

Nanosecond x-ray diffraction from polycrystalline and amorphous materials in a pinhole camera geometry suitable for laser shock compression experiments.

Nanosecond pulses of quasimonochromatic x-rays emitted from the K shell of ions within a laser-produced plasma are of sufficient spectral brightness to allow single-shot recording of powder diffraction patterns from thin foils of order millimeter diameter. Strong diffraction signals have been observed in a cylindrical pinhole camera arrangement from both polycrystalline and amorphous foils, and the experimental arrangement and foil dimensions are such that they allow for laser shocking or quasi-isentropic loading of the foil during the diffraction process.

Shock deformation of face-centred-cubic metals on subnanosecond timescales.

Despite its fundamental importance for a broad range of applications, little is understood about the behaviour of metals during the initial phase of shock compression. Here, we present molecular dynamics (MD) simulations of shock-wave propagation through a metal allowing a detailed analysis of the dynamics of high strain-rate plasticity. Previous MD simulations have not seen the evolution of the strain from one- to three-dimensional compression that is observed in diffraction experiments.

Radiation transfer effects on the spectra of laser-generated plasmas.

Experimental x-ray spectra of the H-like 2p --> 1s (Lyman-alpha) doublet have been obtained using time-integrated high-resolution spectroscopy of a constrained-flow, laser-generated aluminum plasma. These spectra show monotonic alteration of the relative intensities of the doublet components with distance from the target surface. Excellent agreement between experiment and theory is found only if the modeling includes both ion collisional rates between the fine-structure components of the level and, more importantly, the radiative pumping of one Lyman-alpha component by the other component along the direction of the major velocity gradient (i.

Direct observation of the alpha-epsilon transition in shock-compressed iron via nanosecond x-ray diffraction.

In situ x-ray diffraction studies of iron under shock conditions confirm unambiguously a phase change from the bcc (alpha) to hcp (epsilon) structure. Previous identification of this transition in shock-loaded iron has been inferred from the correlation between shock-wave-profile analyses and static high-pressure x-ray measurements. This correlation is intrinsically limited because dynamic loading can markedly affect the structural modifications of solids.

Thomson scattering measurements of heat flux from ion-acoustic waves in laser-produced aluminum plasmas.

Thomson scattering (TS) measurements are performed at different locations in a laser-produced aluminum plasma. Variations of the separation, wavelength shift, and asymmetric distribution of the two ion-acoustic waves are investigated from their spectral-time-resolved TS images. Detailed information on the space-time evolution of the plasma parameters is obtained.