A new strategy to exploit maximum rate performance for aqueous batteries through a judicious selection of MOF-type electrodes.

A metal-organic framework (MOF) having a redox active 1,4,5,8-naphthalenetetracarboxdiimide (NDI) derivative in its organic linker shows excellent rate performance as an electrode material for aqueous batteries thanks to its large pores. Among aqueous electrolytes examined, K-based ones exhibit the highest rate performance, which is caused by the highest mobility of the smallest hydrated K ion not only in the aqueous electrolyte but also in the electrode. Since the use of a counter electrode with insufficiently small pores for the full-cell configuration offsets this merit, our study may lead to a conclusion that the maximum rate performance for aqueous batteries will be accomplished only through further elaboration of both electrode materials with sufficiently large pores, in which hydrated ions can travel equally fast as those in the electrolyte.

Supported Noble Metal Catalysts and Adsorbents with Soft Lewis Acid Functions.

Heterogeneous noble metal catalysts exhibit various functions. Although their redox functions have been extensively studied, we focused on their soft Lewis acid functions. Supported Au, Pt, and Pd catalysts electrophilically attack the π-electrons of soft bases such as alkynes, alkenes, and aromatic compounds to perform addition and substitution reactions.

Effects of the Pt Shell Thickness on the Oxygen Reduction Reaction on a Well-Defined Pd@Pt Core-Shell Model Surface.

The effect of the Pt shell thickness on the oxygen reduction reaction (ORR) of a Pd@Pt core-shell catalyst was studied using surface science technics and computational approaches. We found Pt shells on Pd rods to be negatively charged because of charge transfer from the Pd substrate when the shell thicknesses were 0.5 or 1 monolayer (ML).

Anchored Palladium Complex-Generated Clusters on Zirconia: Efficiency in Reductive N-Alkylation of Amines with Carbonyl Compounds under Hydrogen Atmosphere.

Carbon-nitrogen bond formation is an important method on both laboratory and industrial scales because it realizes the production of valuable pharmaceuticals, agrochemicals, and fine chemicals. Direct reductive N-alkylation of amines with carbonyl compounds via intermediary imine compounds, especially under catalytic hydrogenation conditions, is one of the most convenient, economical, and environmentally friendly methods for this process. Here we report a novel palladium species on zirconia having specific activity towards hydrogenation of imines but other carbonyl groups remaining intact.

Surface Modification of a Supported Pt Catalyst Using Ionic Liquids for Selective Hydrodeoxygenation of Phenols into Arenes under Mild Conditions.

The selective and efficient removal of oxygenated groups from lignin-derived phenols is a critical challenge to utilize lignin as a source for renewable aromatic chemicals. This report describes how surface modification of a zeolite-supported Pt catalyst using ionic liquids (ILs) remarkably increases selectivity for the hydrodeoxygenation (HDO) of phenols into arenes under mild reaction conditions using atmospheric pressure H . Unmodified Pt/H-ZSM-5 converts phenols into aliphatic species as the major products along with a slight amount of arenes (10 % selectivity).

Selective adsorption of 1,3-dimethyltrisulfane (DMTS) responsible for aged odour in Japanese sake using supported gold nanoparticles.

Gold (Au) nanoparticles (NPs) supported on SiO (Au/SiO) were prepared by a practical impregnation method and applied as an adsorbent for 1,3-dimethyltrisulfane (DMTS), which is responsible for an unpleasant odour in drinks, especially Japanese sake. Compared with a conventional adsorbent, activated carbon, Au/SiO selectively reduced the DMTS concentration in Japanese sake without decreasing the concentrations of other aromatic components. DFT calculations revealed that the selective adsorption of DMTS occurred through the formation of a stable intermediate.

Efficient Decarbonylation of Furfural to Furan Catalyzed by Zirconia-Supported Palladium Clusters with Low Atomicity.

Decarbonylation of furfural to furan was efficiently catalyzed by ZrO -supported Pd clusters in the liquid phase under a N atmosphere without additives. Although Pd/C and Pd/Al O have frequently been used for decarbonylation, Pd/ZrO exhibited superior catalytic performance compared with these conventional catalysts. Transmission electron microscopy and X-ray absorption fine structure measurements revealed that the size of the Pd particles decreased with an increase in the specific surface area of ZrO .

Phase transition kinetics of LiNi0.5Mn1.5O4 analyzed by temperature-controlled operando X-ray absorption spectroscopy.

LiNi0.5Mn1.5O4 (LNMO) is a promising positive electrode material for lithium ion batteries because it shows a high potential of 4.

Direct observation of a metastable crystal phase of Li(x)FePO4 under electrochemical phase transition.

The phase transition between LiFePO4 and FePO4 during nonequilibrium battery operation was tracked in real time using time-resolved X-ray diffraction. In conjunction with increasing current density, a metastable crystal phase appears in addition to the thermodynamically stable LiFePO4 and FePO4 phases. The metastable phase gradually diminishes under open-circuit conditions following electrochemical cycling.

Supramolecularly engineered perylene bisimide assemblies exhibiting thermal transition from columnar to multilamellar structures.

Perylene 3,4:9,10-tetracarboxylic acid bisimide (PBI) was functionalized with ditopic cyanuric acid to organize it into complex columnar architectures through the formation of hydrogen-bonded supermacrocycles (rosette) by complexing with ditopic melamines possessing solubilizing alkoxyphenyl substituents. The aggregation study in solution using UV-vis and NMR spectroscopies showed the formation of extended aggregates through hydrogen-bonding and π-π stacking interactions. The cylindrical fibrillar nanostructures were visualized by microscopic techniques (AFM, TEM), and the formation of lyotropic mesophase was confirmed by polarized optical microscopy and SEM.

In situ two-dimensional imaging quick-scanning XAFS with pixel array detector.

Quick-scanning X-ray absorption fine structure (XAFS) measurements were performed in transmission mode using a PILATUS 100K pixel array detector (PAD). The method can display a two-dimensional image for a large area of the order of a centimetre with a spatial resolution of 0.2 mm at each energy point in the XAFS spectrum.

Rational construction of perylene bisimide columnar superstructures with a biased helical sense.

Discotic supramolecular complexes bearing six perylene bisimide (PBI) chromophores were prepared by mixing monotopically triple-hydrogen-bonding melamines equipped with two PBI chromophores and two 3,7-dimethyloctyl chiral handles with tritopically triple-hydrogen-bonding cyanuric acid (CA). UV/Vis and fluorescence titration experiments demonstrated that the discotic complexes were formed in methylcyclohexane by the 3:1 complexation between the melamines and CA. TEM and AFM studies revealed that the complexes hierarchically organize into fibrous columnar assemblies, which eventually results in the formation of organogels.

Structural and electronic properties of extremely long perylene bisimide nanofibers formed through a stoichiometrically mismatched, hydrogen-bonded complexation.

Extremely long nanofibers, whose lengths reach the millimeter regime, are generated via co-aggregation of a melamine-appended perylene bisimide semiconductor and a substituted cyanurate, both of which are ditopic triple-hydrogen-bonding building blocks; they co-aggregate in an unexpected stoichiometrically mismatched 1:2 ratio. Various microscopic and X-ray diffraction studies suggest that hydrogen-bonded polymeric chains are formed along the long axis of the nanofibers by the 1:2 complexation of the two components, which further stack along the short axis of the nanofibers. The photocarrier generation mechanism in the nanofibers is investigated by time-of-flight (TOF) experiments under electric and magnetic fields, revealing the birth and efficient recombination of singlet geminate electron-hole pairs.

X-ray diffractometry for the structure determination of a submicrometre single powder grain.

A high-precision diffractometer has been developed for the structure analysis of a submicrometre-scale single grain of a powder sample at the SPring-8 BL40XU undulator beamline. The key design concept is the combination of a stable focused synchrotron radiation beam and the precise axis control of the diffractometer, which allows accurate diffraction intensity data of a submicrometre-scale single powder grain to be measured. The phase zone plate was designed to create a high-flux focused synchrotron radiation beam.

Ultra-high-precision time control system over any long time delay for laser pump and synchrotron x-ray probe experiment.

An ultra-high-precision clock system for long time delay has been developed for picosecond time-resolved x-ray diffraction measurements using synchrotron radiation (SR) pulses and synchronized femtosecond laser pulses. The time delay control between pump laser pulse and the probe SR pulse was achieved by combining an in-phase quadrature modulator and a synchronous counter. This method allowed us to change the delay time by a nearly infinite amount while maintaining the precision of +/-8.