Significant Efficiency Enhancements in Non-Y Series Acceptors by the Addition of Outer Side Chains.

Most current highly efficient organic solar cells utilize small molecules like Y6 and its derivatives as electron acceptors in the photoactive layer. In this work, a small molecule acceptor, SC8-IT4F, is developed through outer side chain engineering on the terminal thiophene of a conjugated 6,12-dihydro-dithienoindeno[2,3-d:2',3'-d']-s-indaceno[1,2-b:5,6-b']dithiophene (IDTT) central core. Compared to the reference molecule C8-IT4F, which lacks outer side chains, SC8-IT4F displays notable differences in molecule geometry (as shown by simulations), thermal behavior, single-crystal packing, and film morphology.

Acid-Triggered Side Chain Cleavage Leads to Doped Conjugated Polymers of High Conductivity.

Cleavable side chain based conjugated polymers (CSCPs) represent a unique approach to offering solution processability with added benefits via the elimination of insulating side chains. This work highlights an optimally designed polythiophene-carboxylic acid based CSCP, POET-T2-COOH, which achieves a conductivity exceeding 350 S/cm in molecularly doped and side chain cleaved films, 100-100,000 times higher than three other structurally isomeric CSCPs. The high conductivity of POET-T2-COOH is accomplished via a new "cleavage with doping" methodology, synergistically combining a strong acid and a primary dopant.

Precisely Controlling Polymer Acceptors with Weak Intramolecular Charge Transfer Effect and Superior Coplanarity for Efficient Indoor All-Polymer Solar Cells with over 27% Efficiency.

Indoor photovoltaics (IPVs) are garnering increasing attention from both the academic and industrial communities due to the pressing demand of the ecosystem of Internet-of-Things. All-polymer solar cells (all-PSCs), emerging as a sub-type of organic photovoltaics, with the merits of great film-forming properties, remarkable morphological and light stability, hold great promise to simultaneously achieve high efficiency and long-term operation in IPV's application. However, the dearth of polymer acceptors with medium-bandgap has impeded the rapid development of indoor all-PSCs.

Anomalous Correlation between Thermal Conductivity and Elastic Modulus in Two-Dimensional Hybrid Metal Halide Perovskites.

Device-level implementation of soft materials for energy conversion and thermal management demands a comprehensive understanding of their thermal conductivity and elastic modulus to mitigate thermo-mechanical challenges and ensure long-term stability. Thermal conductivity and elastic modulus are usually positively correlated in soft materials, such as amorphous macromolecules, which poses a challenge to discover materials that are either soft and thermally conductive or hard and thermally insulative. Here, we show anomalous correlations of thermal conductivity and elastic modulus in two-dimensional (2D) hybrid organic-inorganic perovskites (HOIP) by engineering the molecular interactions between organic cations.

Optimized Incorporation of Furan into Diketopyrrolopyrrole-Based Conjugated Polymers for Organic Field-Effect Transistors.

Flexible electronics have received considerable attention in the past decades due to their promising application in rollable display screens, wearable devices, implantable devices, and other electronic applications. In particular, conjugated polymers are favored for flexible electronics due to their mechanical flexibility and potential for solution-processed fabrication techniques, such as blade-coating, roll-to-roll printing, and high-throughput printing allowing for high-performance transistor devices. Thiophene is the prevailing conjugated unit to construct these conjugated polymers due to its favorable electronic properties.

The role of interfacial donor-acceptor percolation in efficient and stable all-polymer solar cells.

Polymerization of Y6-type acceptor molecules leads to bulk-heterojunction organic solar cells with both high power-conversion efficiency and device stability, but the underlying mechanism remains unclear. Here we show that the exciton recombination dynamics of polymerized Y6-type acceptors (Y6-PAs) strongly depends on the degree of aggregation. While the fast exciton recombination rate in aggregated Y6-PA competes with electron-hole separation at the donor-acceptor (D-A) interface, the much-suppressed exciton recombination rate in dispersed Y6-PA is sufficient to allow efficient free charge generation.

Precise synthesis and photovoltaic properties of giant molecule acceptors.

Series of giant molecule acceptors DY, TY and QY with two, three and four small molecule acceptor subunits are synthesized by a stepwise synthetic method and used for systematically investigating the influence of subunit numbers on the structure-property relationship from small molecule acceptor YDT to giant molecule acceptors and to polymerized small molecule acceptor PY-IT. Among these acceptors-based devices, the TY-based film shows proper donor/acceptor phase separation, higher charge transfer state yield and longer charge transfer state lifetime. Combining with the highest electron mobility, more efficient exciton dissociation and lower charge carrier recombination properties, the TY-based device exhibits the highest power conversion efficiency of 16.

Auxiliary sequential deposition enables 19%-efficiency organic solar cells processed from halogen-free solvents.

High-efficiency organic solar cells are often achieved using toxic halogenated solvents and additives that are constrained in organic solar cells industry. Therefore, it is important to develop materials or processing methods that enabled highly efficient organic solar cells processed by halogen free solvents. In this paper, we report an innovative processing method named auxiliary sequential deposition that enables 19%-efficiency organic solar cells processed by halogen free solvents.

Study of Glass Formation and Crystallization Kinetics in a 2D Metal Halide Perovskite Using Ultrafast Calorimetry.

While crystalline 2D metal halide perovskites (MHPs) represent a well-celebrated semiconductor class, supporting applications in the fields of photovoltaics, emitters, and sensors, the recent discovery of glass formation in an MHP opens many new opportunities associated with reversible glass-crystalline switching, with each state offering distinct optoelectronic properties. However, the previously reported [-(-)-1-(1-naphthyl)ethylammonium]PbBr perovskite is a strong glass former with sluggish glass-crystal transformation time scales, pointing to a need for glassy MHPs with a broader range of compositions and crystallization kinetics. Herein we report glass formation for low-melting-temperature 1-MeHaPbI (1-MeHa = 1-methyl-hexylammonium) using ultrafast calorimetry, thereby extending the range of MHP glass formation across a broader range of organic (fused ring to branched aliphatic) and halide (bromide to iodide) compositions.

Introducing a Phenyl End Group in the Inner Side Chains of A-DA'D-A Acceptors Enables High-Efficiency Organic Solar Cells Processed with Nonhalogenated Solvent.

Power conversion efficiency (PCE) of organic solar cells (OSCs) processed by nonhalogenated solvents is unsatisfactory due to the unfavorable morphology. Herein, two new small molecule acceptors (SMAs) Y6-Ph and L8-Ph are synthesized by introducing a phenyl end group in the inner side chains of the SMAs of Y6 and L8-BO, respectively, for overcoming the excessive aggregation of SMAs in the long-time film forming processed by nonhalogenated solvents. First, the effect of the film forming time on the aggregation property and photovoltaic performance of Y6, L8-BO, Y6-Ph, and L8-Ph is studied by using the commonly used solvents: chloroform (CF) (rapid film forming process) and chlorobenzene (CB) (slow film forming process).

Unveiling re-entrant phase behavior and crystalline-amorphous interactions in semi-conducting polymer:small molecule blends.

It has been reported recently that conjugated polymer:small molecule systems might exhibit complex, re-entrant phase behavior with hourglass or closed-loop miscibility gaps due to an 'apparent' lower critical solution temperature branch. However, the study did not firmly establish if the observations were reflecting equilibrium or not. To assure that the observed shapes of the binodals a mixing experiment represent local near-equilibrium conditions that capture complex molecular interactions or equation-of-state effects, we present here the liquidus and the binodal for the exact same systems, , PTB7-Th:PCBM, PffBT4T-C9C13:PCBM and PTB7-Th:EH-IDTBR, with the liquidus measured a demixing experiment with long annealing time of days to weeks.

Emergent molecular traits of lettuce and tomato grown under wavelength-selective solar cells.

The integration of semi-transparent organic solar cells (ST-OSCs) in greenhouses offers new agrivoltaic opportunities to meet the growing demands for sustainable food production. The tailored absorption/transmission spectra of ST-OSCs impacts the power generated as well as crop growth, development and responses to the biotic and abiotic environments. To characterize crop responses to ST-OSCs, we grew lettuce and tomato, traditional greenhouse crops, under three ST-OSC filters that create different light spectra.

Near-infrared absorbing acceptor with suppressed triplet exciton generation enabling high performance tandem organic solar cells.

Reducing the energy loss of sub-cells is critical for high performance tandem organic solar cells, while it is limited by the severe non-radiative voltage loss via the formation of non-emissive triplet excitons. Herein, we develop an ultra-narrow bandgap acceptor BTPSeV-4F through replacement of terminal thiophene by selenophene in the central fused ring of BTPSV-4F, for constructing efficient tandem organic solar cells. The selenophene substitution further decrease the optical bandgap of BTPSV-4F to 1.

Relating reorganization energies, exciton diffusion length and non-radiative recombination to the room temperature UV-vis absorption spectra of NF-SMA.

Understanding excited-state reorganization energies, exciton diffusion lengths and non-radiative (NR) recombination, and the overall optoelectronic responses of nonfullerene small molecule acceptors (NF-SMAs) is important in order to rationally design new materials with controlled properties. While the effects of structural modifications on the optical gaps and electron affinities of NF-SMAs have been studied extensively, analyses of their absorption spectra that carefully characterize electronic and vibrational contributions that allow comparisons of reorganization energies and their implications for exciton diffusion lengths and NR recombination have yet to be reported. Here, we study the room temperature absorption spectra of three structural classes of NF-SMAs in dilute solutions through multiparameter Franck Condon (MFC) analyses and density functional theory (DFT) calculations.

Small-Molecule Acceptor with Unsymmetric Substituents and Fused Rings for High-Performance Organic Solar Cells with Enhanced Mobility and Reduced Energy Losses.

A new unsymmetric small-molecule acceptor (SMA) BTPOSe-4F was designed by unsymmetric structure modification to Y6 with an alkyl upper side chain replaced by an alkoxy side chain and a sulfur atom in its central fused ring replaced by a selenium atom, for the application as an acceptor to fabricate organic solar cells (OSCs). BTPOSe-4F exhibits a higher lowest unoccupied molecular orbital (LUMO) energy level, a reduced nonradiation energy loss, and better charge extraction properties in its binary OSCs with a higher of 0.886.

Importance of Electric-Field-Independent Mobilities in Thick-Film Organic Solar Cells.

In organic solar cells (OSCs), a thick active layer usually yields a higher photocurrent with broader optical absorption than a thin active layer. In fact, a ∼300 nm thick active layer is more compatible with large-area processing methods and theoretically should be a better spot for efficiency optimization. However, the bottleneck of developing high-efficiency thick-film OSCs is the loss in fill factor (FF).

A Top-Down Strategy to Engineer ActiveLayer Morphology for Highly Efficient and Stable All-Polymer Solar Cells.

A major challenge hindering the further development of all-polymer solar cells (all-PSCs) employing polymerized small-molecule acceptors is the relatively low fill factor (FF) due to the difficulty in controlling the active-layer morphology. The issues typically arise from oversized phase separation resulting from the thermodynamically unfavorable mixing between two macromolecular species, and disordered molecular orientation/packing of highly anisotropic polymer chains. Herein, a facile top-down controlling strategy to engineer the morphology of all-polymer blends is developed by leveraging the layer-by-layer (LBL) deposition.

Achieving 19% Power Conversion Efficiency in Planar-Mixed Heterojunction Organic Solar Cells Using a Pseudosymmetric Electron Acceptor.

A record power conversion efficiency (PCE) of over 19% is realized in planar-mixed heterojunction (PMHJ) organic solar cells (OSCs) by adopting the asymmetric selenium substitution strategy in making a pseudosymmetric electron acceptor, BS3TSe-4F. The combined molecular asymmetry with more polarizable selenium substitution increases the dielectric constant of the D18/BS3TSe-4F blend, helping lower the exciton binding energy. On the other hand, dimer packing in BS3TSe-4F is facilitated to enable free charge generation, helping more efficient exciton dissociation and lowering the radiative recombination loss (ΔE ) of OSCs.

16.52% Efficiency All-Polymer Solar Cells with High Tolerance of the Photoactive Layer Thickness.

All-polymer solar cells (all-PSCs) have drawn growing attention and achieved tremendous progress recently, but their power conversion efficiency (PCE) still lags behind small-molecule-acceptor (SMA)-based PSCs due to the relative difficulty on morphology control of polymer photoactive blends. Here, low-cost PTQ10 is introduced as a second polymer donor (a third component) into the PM6:PY-IT blend to finely tune the energy-level matching and microscopic morphology of the polymer blend photoactive layer. The addition of PTQ10 decreases the π-π stacking distance, and increases the π-π stacking coherence length and the ordered face-on molecular packing orientation, which improves the charge separation and transport in the photoactive layer.

Semi-paracrystallinity in semi-conducting polymers.

Precise determination of structural organization of semi-conducting polymers is of paramount importance for the further development of these materials in organic electronic technologies. Yet, prior characterization of some of the best-performing materials for transistor and photovoltaic applications, which are based on polymers with rigid backbones, often resulted in conundrums in which X-ray scattering and microscopy yielded seemingly contradicting results. Here we solve the paradox by introducing a new structural model, , semi-paracrystalline organization.

Understanding, quantifying, and controlling the molecular ordering of semiconducting polymers: from novices to experts and amorphous to perfect crystals.

Molecular packing and texture of semiconducting polymers are often critical to the performance of devices using these materials. Although frameworks exist to quantify the ordering, interpretations are often just qualitative, resulting in imprecise use of terminology. Here, we reemphasize the significance of quantifying molecular ordering in terms of degree of crystallinity (volume fractions that are ordered) and quality of ordering and their relation to the size scale of an ordered region.

High Miscibility Compatible with Ordered Molecular Packing Enables an Excellent Efficiency of 16.2% in All-Small-Molecule Organic Solar Cells.

In all-small-molecule organic solar cells (ASM-OSCs), a high short-circuit current (J ) usually needs a small phase separation, while a high fill factor (FF) is generally realized in a highly ordered packing system. However, small domain and ordered packing always conflicted each other in ASM-OSCs, leading to a mutually restricted J and FF. In this study, alleviation of the previous dilemma by the strategy of obtaining simultaneous good miscibility and ordered packing through modulating homo- and heteromolecular interactions is proposed.

Upper and Apparent Lower Critical Solution Temperature Branches in the Phase Diagram of Polymer:Small Molecule Semiconducting Systems.

Solution-processable semiconducting materials are complex materials with a wide range of applications. Despite their extensive study and utility, their molecular interactions as manifested, for example, in phase behavior are poorly understood. Here, we aim to understand the phase behavior of conjugated systems by determining phase diagrams spanning extensive temperature ranges for various combinations of the highly disordered semiconducting polymer (PTB7-Th) with crystallizable (IT-M and PCBM) and noncrystallizable (di-PDI) small molecule acceptors (SMAs), with polystyrene as an amorphous control, a nonsemiconducting commodity polymer.