Hierarchically Structured NbO Microflowers with Enhanced Capacity and Fast-Charging Capability for Flexible Planar Sodium Ion Micro-Supercapacitors.

Highlights: Hierarchically structured NbO microflowers consiste of porous and ultrathin nanosheets. NbO microflowers exhibit enhanced capacity and rate performance boosting Na ion storage. Planar NIMSCs with charge and kinetics matching show superior areal capacitance and lifespan.

Detection and identification of oil spill species based on polarization information.

Aiming at the problem of poor oil identification accuracy in existing oil spill detection technologies, the polarization degree model of oil spill on rough sea surface under different azimuths and zenith angles was established based on Fresnel theory. The analytical expressions of visible light polarization degree in calm and fluctuating water surface were derived respectively, and the polarization degree model of oil spill in reflection space was constructed. The effectiveness of the method and its influence on the polarization distribution of oil spill were analyzed by simulation.

Simplified analysis and suppression of polarization aberration in planar symmetric optical systems.

Polarized remote sensing imaging has attracted more attention in recent years due to its wider detection information dimension compared to traditional imaging methods. However, the inherent instrument errors in optical systems can lead to errors in the polarization state of the incident and outgoing light, which is the polarization aberration of the optical system, resulting in a decrease in polarization detection accuracy. We propose a polarization aberration simplification calculation method for planar symmetric optical systems, by what only three ray samples are needed to obtain the distribution of polarization aberrations within the pupil.

Improvement of coated aluminum sheet pBRDF model based on scattering and phase function optimization.

The pBRDF model is able to relate the properties of target materials to the polarization information of incident and reflected light, and is an important basis for obtaining polarization information of targets in space. It is an important basis for obtaining target polarization information and polarization detection of space targets. P-G model is the first strictly pBRDF model officially released, but there are still deficiencies.

Compressive space-dimensional dual-coded hyperspectral polarimeter (CSDHP) and interactive design method.

A compressive space-dimensional dual-coded hyperspectral polarimeter (CSDHP) and interactive design method are introduced. A digital micromirror device (DMD), a micro polarizer array detector (MPA), and a prism grating prism (PGP) are combined to achieve single-shot hyperspectral polarization imaging. The longitudinal chromatic aberration (LCA) and spectral smile of the system are both eliminated to guarantee the matching accuracy of DMD and MPA pixels.

Polarization Super-Resolution Imaging Method Based on Deep Compressed Sensing.

The division of focal plane (DoFP) polarization imaging sensors, which can simultaneously acquire the target's two-dimensional spatial information and polarization information, improves the detection resolution and recognition capability by capturing the difference in polarization characteristics between the target and the background. In this paper, we propose a novel polarization imaging method based on deep compressed sensing (DCS) by adding digital micromirror devices (DMD) to an optical system and simulating the polarization transmission model of the optical system to reconstruct high-resolution images under low sampling rate conditions. By building a simulated dataset, training a polarization super-resolution imaging network, and showing excellent reconstructions on real shooting scenes, compared to current algorithms, our model has a higher peak signal-to-noise ratio (PSNR), which validates the feasibility of our approach.

Design and experimental study of a polarization imaging optical system for oil spills on sea surfaces.

The marine environment is complex and changeable. To meet the urgent needs of accurate detection and identification of oil spills, a visible/infrared dual-band common-aperture polarization imaging optical system based on a defocused plane polarization detector is designed. The optical system is evaluated by ZEMAX simulation software, and we carried out the polarization imaging oil species discrimination experiment based on the split focal plane polarization detector, which proved that for some oil species that cannot be distinguished by intensity information, the polarization information can be distinguished.

Achieving stable Na metal cycling via polydopamine/multilayer graphene coating of a polypropylene separator.

Sodium metal batteries are considered one of the most promising low-cost high-energy-density electrochemical energy storage systems. However, the growth of unfavourable Na metal deposition and the limited cell cycle life hamper the application of this battery system at a large scale. Here, we propose the use of polypropylene separator coated with a composite material comprising polydopamine and multilayer graphene to tackle these issues.

Scalable Production of Freestanding Few-Layer β-Borophene Single Crystalline Sheets as Efficient Electrocatalysts for Lithium-Sulfur Batteries.

Two-dimensional (2D) borophene has attracted tremendous interest due to its fascinating properties, which have potential applications in catalysts, energy storage devices, and high-speed transistors. In the past few years, borophene was theoretically predicted as an ideal electrode material for lithium-sulfur (Li-S) batteries because of its low-density, metallic conductivity, high Li-ion surface mobility, and strong interface bonding energy to polysulfide. But until now, borophene-based Li-S batteries have not yet been achieved in experiments due to the absence of a large-scale synthetic method of freestanding borophene nanostructures with a high enough structural stability, conductivity, and uniformity.

Trends of epidemiological characteristics of traumatic spinal cord injury in China, 2009-2018.

Objective: We focus on providing the first comprehensive national dataset on the incidence, injury aetiology and mortality of TSCI in China.

Methods: A multi-stage stratified cluster sampling method was used. We included TSCI cases from all hospitals in three regions, nine provinces and 27 cities in China via search of electronic medical records and retrospectively analysed the characteristics of TSCI in China from 2009 to 2018.

Design of a superresolution large-aperture telescopic optical system with a wide field of view.

A pupil modulator is a useful tool to improve the resolution of an optical imaging system beyond the classical diffraction limit. However, when this technology is used in a large-aperture telescopic imaging system, the field of view (FOV) with good superresolution (SR) imaging quality is significantly smaller than the designed FOV of the baseline optical system. In this paper, we investigate the influence of various aberrations on the SR properties of a telescopic system using a low sidelobe five-ring pure phase pupil modulator.

Three dimensional TiC MXene nanoribbon frameworks with uniform potassiophilic sites for the dendrite-free potassium metal anodes.

Potassium (K) metal batteries hold great promise as an advanced electrochemical energy storage system because of their high theoretical capacity and cost efficiency. However, the practical application of K metal anodes has been limited by their poor cycling life caused by dendrite growth and large volume changes during the plating/stripping process. Herein, three-dimensional (3D) alkalized TiC (a-TiC) MXene nanoribbon frameworks were demonstrated as advanced scaffolds for dendrite-free K metal anodes.

3D Flexible, Conductive, and Recyclable TiCT MXene-Melamine Foam for High-Areal-Capacity and Long-Lifetime Alkali-Metal Anode.

Alkali metals are ideal anodes for high-energy-density rechargeable batteries, while seriously hampered by limited cycle life and low areal capacities. To this end, rationally designed frameworks for dendrite-free and volume-changeless alkali-metal deposition at both high current densities and capacities are urgently required. Herein, a general 3D conductive TiCT MXene-melamine foam (MXene-MF) is demonstrated as an elastic scaffold for dendrite-free, high-areal-capacity alkali anodes (Li, Na, K).

A Two-Dimensional Mesoporous Polypyrrole-Graphene Oxide Heterostructure as a Dual-Functional Ion Redistributor for Dendrite-Free Lithium Metal Anodes.

Guiding the lithium ion (Li-ion) transport for homogeneous, dispersive distribution is crucial for dendrite-free Li anodes with high current density and long-term cyclability, but remains challenging for the unavailable well-designed nanostructures. Herein, we propose a two-dimensional (2D) heterostructure composed of defective graphene oxide (GO) clipped on mesoporous polypyrrole (mPPy) as a dual-functional Li-ion redistributor to regulate the stepwise Li-ion distribution and Li deposition for extremely stable, dendrite-free Li anodes. Owing to the synergy between the Li-ion transport nanochannels of mPPy and the Li-ion nanosieves of defective GO, the 2D mPPy-GO heterostructure achieves ultralong cycling stability (1000 cycles), even tests at 0 and 50 °C, and an ultralow overpotential of 70 mV at a high current density of 10.

Conducting and Lithiophilic MXene/Graphene Framework for High-Capacity, Dendrite-Free Lithium-Metal Anodes.

Li-metal anode is widely acknowledged as the ideal anode for high-energy-density batteries, but seriously hindered by the uncontrollable dendrite growth and infinite volume change. Toward this goal, suitable stable scaffolds for dendrite-free Li anodes with large current density (>5 mA cm) and high Li loading (>90%) are highly in demand. Herein, a conductive and lithiophilic three-dimensional (3D) MXene/graphene (MG) framework is demonstrated for a dendrite-free Li-metal anode.

Author Correction: Three-Dimensional Printed Model-Assisted Screw Installation in Treating Posterior Atlantoaxial Internal Fixation.

A correction to this article has been published and is linked from the HTML and PDF versions of this paper. The error has been fixed in the paper.

Three-Dimensional Printed Model-Assisted Screw Installation in Treating Posterior Atlantoaxial Internal Fixation.

The aim of this study was to evaluate the efficacy and feasibility of a life-size 3-dimensional printing assisted posterior internal fixation. We performed a retrospective review of 138 patients who received posterior atlantoaxial internal fixation from October 2009 to March 2015 with a minimum follow-up period of 12 months. Group A included 76 patients who received the conventional free-hand technique.

All-MXene-Based Integrated Electrode Constructed by TiC Nanoribbon Framework Host and Nanosheet Interlayer for High-Energy-Density Li-S Batteries.

High-energy-density lithium-sulfur (Li-S) batteries hold promise for next-generation portable electronic devices, but are facing great challenges in rational construction of high-performance flexible electrodes and innovative cell configurations for actual applications. Here we demonstrated an all-MXene-based flexible and integrated sulfur cathode, enabled by three-dimensional alkalized TiC MXene nanoribbon (a-TiC MNR) frameworks as a S/polysulfides host (a-TiC-S) and two-dimensional delaminated TiC MXene (d-TiC) nanosheets as interlayer on a polypropylene (PP) separator, for high-energy and long-cycle Li-S batteries. Notably, an a-TiC MNR framework with open interconnected macropores and an exposed surface area guarantees high S loading and fast ionic diffusion for prompt lithiation/delithiation kinetics, and the 2D d-TiC MXene interlayer remarkably prevents the shuttle effect of lithium polysulfides via both chemical absorption and physical blocking.

Analysis of nodal aberration properties in off-axis freeform system design.

Freeform surfaces have the advantage of balancing off-axis aberration. In this paper, based on the framework of nodal aberration theory (NAT) applied to the coaxial system, the third-order astigmatism and coma wave aberration expressions of an off-axis system with Zernike polynomial surfaces are derived. The relationship between the off-axis and surface shape acting on the nodal distributions is revealed.