Numerical and experimental study of capillary-driven flow of PCR solution in hybrid hydrophobic microfluidic networks.

Capillary-driven microfluidics is essential for development of point-of-care diagnostic micro-devices. Polymerase chain reaction (PCR)-based micro-devices are widely developed and used in such point-of-care settings. It is imperative to characterize the fluid parameters of PCR solution for designing efficient capillary-driven microfluidic networks.

Manipulating liquid plugs in microchannel with controllable air vents.

An air venting element on microchannel, which can be controlled externally and automatically, was demonstrated for manipulating liquid plugs in microfluidic systems. The element's open and closed statuses correspond to the positioning and movement of a liquid plug in the microchannel. Positioning of multiple liquid plugs at an air venting element enabled the merging and mixing of the plugs.

A high-flux isopore micro-fabricated membrane for effective concentration and recovering of waterborne pathogens.

A high-flux metallic micro/nano-filtration membrane has been fabricated and validated for isolation of waterborne pathogens from drinking water. Obtained membrane with smooth surface and perfectly ordered pores was achieved by a high yield and cost effective multilevel lithography and electroplating technique. The micro-fabricated membrane was also strengthened with an integrated back-support, which can withstand a high pressure during filtration.

Real-time PCR array chip with capillary-driven sample loading and reactor sealing for point-of-care applications.

A major challenge for the lab-on-a-chip (LOC) community is to develop point-of-care diagnostic chips that do not use instruments. Such instruments include pumping or liquid handling devices for distribution of patient's nucleic-acid test sample among an array of reactors and microvalves or mechanical parts to seal these reactors. In this paper, we report the development of a primer pair pre-loaded PCR array chip, in which the loading of the PCR mixture into an array of reactors and subsequent sealing of the reactors were realized by a novel capillary-based microfluidics with a manual two-step pipetting operations.