Surface-assembled poly(I:C) on PEGylated PLGA microspheres as vaccine adjuvant: APC activation and bystander cell stimulation.

Biodegradable poly(lactic-co-glycolic acid) (PLGA) microspheres are potential vehicles to deliver antigens for vaccination. Because they lack the full capacity to activate professional antigen presenting cells (APCs), combination with an immunostimulatory adjuvant may be considered. A candidate is the synthetic TLR3 ligand polyriboinosinic acid-polyribocytidylic acid, poly(I:C), which drives cell-mediated immunity.

Drug delivery's quest for polymers: Where are the frontiers?

Since the legendary 1964 article of Folkman and Long entitled "The use of silicone rubber as a carrier for prolonged drug therapy" the role of polymers in controlled drug delivery has come a long way. Today it is evident that polymers play a crucial if not the prime role in this field. The latest boost owes to the interest in drug delivery for the purpose of tissue engineering in regenerative medicine.

Remodeling of tissue-engineered bone structures in vivo.

Implant design for bone regeneration is expected to be optimized when implant structures resemble the anatomical situation of the defect site. We tested the validity of this hypothesis by exploring the feasibility of generating different in vitro engineered bone-like structures originating from porous silk fibroin scaffolds decorated with RGD sequences (SF-RGD), seeded with human mesenchymal stem cells (hMSC). Scaffolds with small (106-212 μm), medium (212-300 μm), and large pore diameter ranges (300-425 μm) were seeded with hMSC and subsequently differentiated in vitro into bone-like tissue resembling initial scaffold geometries and featuring bone-like structures.

Biocompatibility and osteoconduction of macroporous silk fibroin implants in cortical defects in sheep.

The goal of the presented study was to compare the biocompatibility and cellular responses to porous silk fibroin (SF) scaffolds produced in a water-based (UPW) or a solvent based process (HFIP) using two different SF sources. For that reason, four different SF scaffolds were implanted (n=6) into drill hole defects in the cancellous bone of the sheep tibia and humerus. The scaffolds were evaluated histologically for biocompatibility, cell-material interaction, and cellular ingrowth.

Impact of IGF-I release kinetics on bone healing: a preliminary study in sheep.

Spatiotemporal release of growth factors from a delivery device can profoundly affect the efficacy of bone growth induction. Here, we report on a delivery platform based on the encapsulation of insulin-like growth factor I (IGF-I) in different poly(D,L-lactide) (PLA) and poly(D,L-lactide-co-glycolide) (PLGA) microsphere (MS) formulations to control IGF-I release kinetics. In vitro IGF-I release profiles generally exhibited an initial burst (14-36% of total IGF-I content), which was followed by a more or less pronounced dormant phase with little release (2 to 34 days), and finally, a third phase of re-increased IGF-I release.

Particulate formulations for the delivery of poly(I:C) as vaccine adjuvant.

Current research and development of antigens for vaccination often center on purified recombinant proteins, viral subunits, synthetic oligopeptides or oligosaccharides, most of them suffering from being poorly immunogenic and subject to degradation. Hence, they call for efficient delivery systems and potent immunostimulants, jointly denoted as adjuvants. Particulate delivery systems like emulsions, liposomes, nanoparticles and microspheres may provide protection from degradation and facilitate the co-formulation of both the antigen and the immunostimulant.

Surface assembly of poly(I:C) on PEGylated microspheres to shield from adverse interactions with fibroblasts.

By expressing an array of pattern recognition receptors (PRRs), fibroblasts play an important role in stimulating and modulating the response of the innate immune system. The TLR3 ligand polyriboinosinic acid-polyribocytidylic acid, poly(I:C), a mimic of viral dsRNA, is a vaccine adjuvant candidate to activate professional antigen presenting cells (APCs). However, owing to its ligation with extracellular TLR3 on fibroblasts, subcutaneously administered poly(I:C) bears danger towards autoimmunity.

Electrospun matrices for localized drug delivery: current technologies and selected biomedical applications.

Electrospinning allows for the preparation of unique matrices with nano- to micrometer sized fibers using diverse materials and numerous fabrication techniques. A variety of post-spinning modification techniques add to the large repertoire and enable development of tailored drug delivery systems. Herein we provide an overview on current developments regarding different techniques to manufacture electrospun matrices and achieve efficient drug loading and release.

Tuning the immune response of dendritic cells to surface-assembled poly(I:C) on microspheres through synergistic interactions between phagocytic and TLR3 signaling.

The artificial dsRNA polyriboinosinic acid-polyribocytidylic acid, poly(I:C), is a potent adjuvant candidate for vaccination, as it strongly drives cell-mediated immunity. However, because of its effects on non-immune bystander cells, poly(I:C) administration may bear danger for the development of autoimmune diseases. Thus poly(I:C) should be applied in the lowest dose possible.

Silk fibroin as a vehicle for drug delivery applications.

Silk fibroin (SF), a naturally occurring protein polymer, has several unique properties making it a favorable matrix for the incorporation and delivery of a range of therapeutic agents. SF is biocompatible, slowly biodegradable, and endowed with excellent mechanical properties and processability. Novel manufacturing techniques including mild all-aqueous processes have expanded its range of application even to sensitive protein and nucleic acid therapeutics.

Design and validation of a novel bioreactor principle to combine online micro-computed tomography monitoring and mechanical loading in bone tissue engineering.

Mechanical loading plays an important role in bone remodeling in vivo and, therefore, has been suggested as a key parameter in stem cell-based engineering of bone-like tissue in vitro. However, the optimization of loading protocols during stem cell differentiation and subsequent bone-like tissue formation is challenged by multiple input factors, which are difficult to control and validate. These include the variable cellular performance of cells harvested from different patients, nonstandardized culture media components, the choice of the biomaterial forming the scaffold, and its morphology, impacting a broader validity of mechanical stimulation regimens.

The use of sulfonated silk fibroin derivatives to control binding, delivery and potency of FGF-2 in tissue regeneration.

The development of biomaterials that mimic the physiological binding of growth factors to the extracellular matrix (ECM) is an appealing strategy for advanced growth factor delivery systems. In vivo, fibroblast growth factor 2 (FGF-2) binds to the sulfated glycosaminoglycan heparan sulfate, which is a major component of the ECM. Therefore, we tested whether silk fibroin (SF) decorated with a sulfonated moiety could mimic the natural ECM environment and lead to advanced delivery of this heparin-binding growth factor.

Concomitant delivery of a CTL-restricted peptide antigen and CpG ODN by PLGA microparticles induces cellular immune response.

Poly(lactide-co-glycolide) (PLGA) microparticles (MP) possess immunological adjuvant properties. Yet, exploitation of their full potential has just begun. The purpose of this study was to explore opportunities arising from surface modifications, and attachment and entrapment of combinations of antigen and a Toll-like receptor (TLR) ligand.

Silk fibroin/hyaluronan scaffolds for human mesenchymal stem cell culture in tissue engineering.

The design of new bioactive scaffolds mimicking the physiologic environment present during tissue formation is an important frontier in biomaterials research. Herein, we evaluated scaffolds prepared from blends of two biopolymers: silk fibroin and hyaluronan. Our rationale was that such blends would allow the combination of silk fibroin's superior mechanical properties with the biological characteristics of hyaluronan.

Biopolymer-based growth factor delivery for tissue repair: from natural concepts to engineered systems.

The extracellular matrix of tissues is regarded as a physiological depot for various growth factors (GFs), from where they are to be released into the surrounding tissue and play their natural roles in tissue regulation. In addition to autocrine and paracrine cell signaling, they provide specific extracellular information necessary to conduct tissue homeostasis and (re)generation. This review will detail on various physiological concepts that have evolved during evolution to control the activity of GFs in a specific manner through interaction with biopolymers of the extracellular matrix, and how such interactions may respond to systemic or cellular signals.

Optimization strategies for electrospun silk fibroin tissue engineering scaffolds.

As a contribution to the functionality of scaffolds in tissue engineering, here we report on advanced scaffold design through introduction and evaluation of topographical, mechanical and chemical cues. For scaffolding, we used silk fibroin (SF), a well-established biomaterial. Biomimetic alignment of fibers was achieved as a function of the rotational speed of the cylindrical target during electrospinning of a SF solution blended with polyethylene oxide.

Microporous silk fibroin scaffolds embedding PLGA microparticles for controlled growth factor delivery in tissue engineering.

The development of prototype scaffolds for either direct implantation or tissue engineering purposes and featuring spatiotemporal control of growth factor release is highly desirable. Silk fibroin (SF) scaffolds with interconnective pores, carrying embedded microparticles that were loaded with insulin-like growth factor I (IGF-I), were prepared by a porogen leaching protocol. Treatments with methanol or water vapor induced water insolubility of SF based on an increase in beta-sheet content as analyzed by FTIR.

Mannose-based molecular patterns on stealth microspheres for receptor-specific targeting of human antigen-presenting cells.

The targeting of antigen-presenting cells has recently gained strong attention for both targeted vaccine delivery and immunomodulation. We prepared surface-modified stealth microspheres that display various mannose-based ligands at graded ligand densities to target phagocytic C-type lectin receptors (CLRs) on human dendritic cells (DCs) and macrophages. Decoration of microspheres with carbohydrate ligands was achieved (i) by electrostatic surface assembly of mannan onto previously formed adlayers of poly( l-lysine) (PLL) or a mix of PLL and poly( l-lysine)- graft-poly(ethylene glycol) (PLL-PEG), or (ii) through assembly of PLL-PEG equipped with small substructure mannoside ligands, such as mono- and trimannose, as terminal substitution of the PEG chains.

Silk fibroin spheres as a platform for controlled drug delivery.

The goal of this proof-of-concept study was the fabrication of drug-loaded silk fibroin (SF) spheres under very mild processing conditions. The spheres were fabricated using the laminar jet break-up of an aqueous SF solution, which was induced by a nozzle vibrating at controlled frequency and amplitude. SF particles were spherical in shape as determined by SEM with diameters in the range of 101 microm to 440 microm, depending on the diameter of the nozzle and the treatment to induce water insolubility of SF.

Metabolic cleavage and translocation efficiency of selected cell penetrating peptides: a comparative study with epithelial cell cultures.

We investigated the metabolic stability of four cell penetrating peptides (CPPs), namely SAP, hCT(9-32)-br, [Palpha] and [Pbeta], when in contact with either subconfluent HeLa, confluent MDCK or Calu-3 epithelial cell cultures. Additionally, through analysis of their cellular translocation efficiency, we evaluated possible relations between metabolic stability and translocation efficiency. Metabolic degradation kinetics and resulting metabolites were assessed using RP-HPLC and MALDI-TOF mass spectrometry.

Dendronised block copolymers as potential vectors for gene transfection.

A series of block copolymers containing a dendronised cationic block for efficient DNA binding and a poly(ethylene glycol) block for encapsulation of the complex were synthesised in a modular fashion using a combination of click chemistry and ring-opening metathesis polymerisation. DNA binding experiments, investigated using gel electrophoresis, dynamic light scattering and transmission electron microscopy, showed that all polymers prepared in this study strongly complex DNA and self-assemble into polyion complex micelles with apparent hydrodynamic radii ranging from 20-120 nm at physiological pH (7.4).

PEGylation as a tool for the biomedical engineering of surface modified microparticles.

Microparticles are of considerable interest for drug delivery, vaccination and diagnostic imaging. In order to obtain microparticles with long circulation times, or to provide the prerequisite for tissue specific targeting through decoration with suitable ligands, their surfaces need to be modified such that they become repellent to the adsorption of opsonic proteins and resistant to unspecific phagocytosis. The currently most considered strategy relies on the immobilisation of a poly(ethylene glycol) (PEG) corona onto the microparticles' surface.

Controlled nerve growth factor release from multi-ply alginate/chitosan-based nerve conduits.

The delivery kinetics of growth factors has been suggested to play an important role in the regeneration of peripheral nerves following axotomy. In this context, we designed a nerve conduit (NC) with adjustable release kinetics of nerve growth factor (NGF). A multi-ply system was designed where NC consisting of a polyelectrolyte alginate/chitosan complex was coated with layers of poly(lactide-co-glycolide) (PLGA) to control the release of embedded NGF.

Insulin-like growth factor I releasing silk fibroin scaffolds induce chondrogenic differentiation of human mesenchymal stem cells.

Growth factor releasing scaffolds are an emerging alternative to autologous or allogenous implants, providing a biologically active template for tissue (re)-generation. The goal of this study is to evaluate the feasibility of controlled insulin-like growth factor I (IGF-I) releasing silk fibroin (SF) scaffolds in the context of cartilage repair. The impact of manufacturing parameters (pH, methanol treatment and drug load) was correlated with IGF-I release kinetics using ELISA and potency tests.

Stable stealth function for hollow polyelectrolyte microcapsules through a poly(ethylene glycol) grafted polyelectrolyte adlayer.

Prospective biomedical applications of hollow polyelectrolyte microcapsules, for example, as drug delivery systems, require surface modifications that help to escape clearance by the mononuclear phagocytic system (MPS). Layer-by-layer assembled microcapsules that were alternatingly composed of polystyrene sulfonate (PSS) and polyallylamine hydrochloride (PAH) were coated with adlayers of poly(ethylene glycol) (PEG)-grafted poly-L-lysine (PLL-g-PEG) and poly-L-glutamic acid (PGA-g-PEG). Their effects on MPS recognition were studied in primary cell cultures of human monocyte derived dendritic cells and macrophages.