Charge injection mediated by inverse micelles in nonpolar solvents: A microscopic model.

Hypothesis: Nonpolar solvents with added charge control agents are widely used in various applications, such as E-paper displays. In spite of previous work, the mechanisms governing charge generation in nonpolar liquids, particularly those induced by electrochemical reactions at the liquid-solid interface, are not completely understood. We hypothesize that a physics-based model, according to the modified Butler-Volmer equation, can be used to quantitatively predict the injection of charges and the corresponding currents, in nonpolar solvents with surfactants.

Interplay of electrokinetic effects in nonpolar solvents for electronic paper displays.

Hypothesis: Electronic paper displays rely on electrokinetic effects in nonpolar solvents to drive the displacement of colloidal particles within a fluidic cell. While Electrophoresis (EP) is a well-established and frequently employed phenomenon, electro-osmosis (EO), which drives fluid flow along charged solid surfaces, has not been studied as extensively. We hypothesize that by exploiting the interplay between these effects, an enhanced particle transport can be achieved.

Single-Molecule Protein Analysis by Centrifugal Droplet Immuno-PCR with Magnetic Nanoparticles.

Detecting proteins in ultralow concentrations in complex media is important for many applications but often relies on complicated techniques. Herein, a single-molecule protein analyzer with the potential for high-throughput applications is reported. Gold-coated magnetic nanoparticles with DNA-labeled antibodies were used for target recognition and separation.

Magnetically actuated glaucoma drainage device for regulating intraocular pressure after implantation.

The key risk factor for glaucoma is increased intraocular pressure (IOP). Glaucoma drainage devices implanted in the eye can reduce IOP and thus stop disease progression. However, most devices currently used in clinical practice are passive and do not allow for postsurgical IOP control, which may result in serious complications such as hypotony (i.

Single Hydrogel Particle Mechanics and Dynamics Studied by Combining Capillary Micromechanics with Osmotic Compression.

Hydrogels can exhibit a remarkably complex response to external stimuli and show rich mechanical behavior. Previous studies of the mechanics of hydrogel particles have generally focused on their static, rather than dynamic, response, as traditional methods for measuring single particle response at the microscopic scale cannot readily measure time-dependent mechanics. Here, we study both the static and the time-dependent response of a single batch of polyacrylamide (PAAm) particles by combining direct contact forces, applied by using Capillary Micromechanics, a method where particles are deformed in a tapered capillary, and osmotic forces are applied by a high molecular weight dextran solution.

A model for designing intraocular pressure-regulating glaucoma implants.

Glaucoma is a group of eye conditions that damage the optic nerve, the health of which is vital for vision. The key risk factor for the development and progression of this disease is increased intraocular pressure (IOP). Implantable glaucoma drainage devices have been developed to divert aqueous humor from the glaucomatous eye as a means of reducing IOP.

An integrated system for automated measurement of airborne pollen based on electrostatic enrichment and image analysis with machine vision.

Here we describe an automated and compact pollen detection system that integrates enrichment, in-situ detection and self-cleaning modules. The system can achieve continuous capture and enrichment of pollen grains in air samples by electrostatic adsorption. The captured pollen grains are imaged with a digital camera, and an automated image analysis based on machine vision is performed, which enables a quantification of the number of pollen particles as well as a preliminary classification into two types of pollen grains.

Conventional glaucoma implants and the new MIGS devices: a comprehensive review of current options and future directions.

Glaucoma is a progressive optic neuropathy that is the second leading cause of preventable blindness worldwide, after cataract formation. A rise in the intraocular pressure (IOP) is considered to be a major risk factor for glaucoma and is associated with an abnormal increase of resistance to aqueous humour outflow from the anterior chamber. Glaucoma drainage devices have been developed to provide an alternative pathway through which aqueous humour can effectively exit the anterior chamber, thereby reducing IOP.

Nonmonotonic swelling and compression dynamics of hydrogels in polymer solutions.

Hydrogels are sponge-like materials that can absorb or expel significant amounts of water. Swelling up from a dried state, they can swell up more than a hundredfold in volume, with the kinetics and the degree of swelling depending sensitively on the physicochemical properties of both the polymer network and the aqueous solvent. In particular, the presence of dissolved macromolecules in the background liquid can have a significant effect, as the macromolecules can exert an additional external osmotic pressure on the hydrogel material, thereby reducing the degree of swelling.

Compression and swelling of hydrogels in polymer solutions: A dominant-mode model.

The swelling and compression of hydrogels in polymer solutions can be understood by considering hydrogel-osmolyte-solvent interactions which determine the osmotic pressure difference between the inside and the outside of a hydrogel particle and the changes in effective solvent quality for the hydrogel network. Using the theory of poroelasticity, we find the exact solution to hydrogel dynamics in a dilute polymer solution, which quantifies the effect of diffusion and partitioning of osmolyte and the related solvent quality change to the volumetric changes of the hydrogel network. By making a dominant-mode assumption, we propose a model for the swelling and compression dynamics of (spherical) hydrogels in concentrated polymer solutions.

Effects of Surfactant and Urea on Dynamics and Viscoelastic Properties of Hydrophobically Assembled Supramolecular Hydrogel.

Physically associated hydrogels based on strong hydrophobic interactions often have attractive mechanical properties that combine processability with elasticity. However, there is a need to study such interactions and understand their relation to the macroscopic hydrogel properties. Therefore, we use the surfactant sodium dodecyl sulfate (SDS) and urea as reagents that disrupt hydrophobic interactions.

Diffusing-wave spectroscopy in a standard dynamic light scattering setup.

Diffusing-wave spectroscopy (DWS) extends dynamic light scattering measurements to samples with strong multiple scattering. DWS treats the transport of photons through turbid samples as a diffusion process, thereby making it possible to extract the dynamics of scatterers from measured correlation functions. The analysis of DWS data requires knowledge of the path length distribution of photons traveling through the sample.

Monodisperse Microshell Structured Gelatin Microparticles for Temporary Chemoembolization.

Embolization is a nonsurgical, minimally invasive procedure that deliberately blocks a blood vessel. Although several embolic particles have been commercialized, their much wider applications have been hampered owing mainly to particle size variation and uncontrollable degradation kinetics. Herein we introduce a microfluidic approach to fabricate highly monodisperse gelatin microparticles (GMPs) with a microshell structure.

Compression and Reswelling of Microgel Particles after an Osmotic Shock.

We use dedicated microfluidic devices to expose soft hydrogel particles to a rapid change in the externally applied osmotic pressure and observe a surprising, nonmonotonic response: After an initial rapid compression, the particle slowly reswells to approximately its original size. We theoretically account for this behavior, enabling us to extract important material properties from a single microfluidic experiment, including the compressive modulus, the gel permeability, and the diffusivity of the osmolyte inside the gel. We expect our approach to be relevant to applications such as controlled release, chromatography, and responsive materials.

Tough Supramolecular Hydrogel Based on Strong Hydrophobic Interactions in a Multiblock Segmented Copolymer.

We report the preparation and structural and mechanical characterization of a tough supramolecular hydrogel, based exclusively on hydrophobic association. The system consists of a multiblock, segmented copolymer of hydrophilic poly(ethylene glycol) (PEG) and hydrophobic dimer fatty acid (DFA) building blocks. A series of copolymers containing 2K, 4K, and 8K PEG were prepared.

Convection associated with exclusion zone formation in colloidal suspensions.

The long-range repulsion of colloids from various interfaces has been observed in a wide range of studies from different research disciplines. This so-called exclusion zone (EZ) formation occurs near surfaces such as hydrogels, polymers, or biological tissues. It was recently shown that the underlying physical mechanism leading to this long-range repulsion is a combination of ion-exchange at the interface, diffusion of ions, and diffusiophoresis of colloids in the resulting ion concentration gradients.

Topochemical polymerization in self-assembled rodlike micelles of bisurea bolaamphiphiles.

Rod-like micelles, formed from bolaamphiphiles with oligo(ethylene oxide) hydrophilic outer segments and a hydrophobic segment with diacetylene flanked by two urea moieties, were covalently fixated by topochemical photopolymerization to high degrees of polymerization by optimizing the hydrophobic core and the hydrophilic periphery of the bolaamphiphiles. Analysis of the polymerized product with dynamic light scattering in chloroform showed degrees of polymerization of approximately 250. Cryo-TEMof bolaamphiphiles before and after UV irradiation showed that the morphology of the rods was conserved upon topochemical polymerization.

Tough stimuli-responsive supramolecular hydrogels with hydrogen-bonding network junctions.

Hydrogels were prepared with physical cross-links comprising 2-ureido-4[1H]-pyrimidinone (UPy) hydrogen-bonding units within the backbone of segmented amphiphilic macromolecules having hydrophilic poly(ethylene glycol) (PEG). The bulk materials adopt nanoscopic physical cross-links composed of UPy-UPy dimers embedded in segregated hydrophobic domains dispersed within the PEG matrix as comfirmed by cryo-electron microscopy. The amphiphilic network was swollen with high weight fractions of water (w(H2O) ≈ 0.

Long-range repulsion of colloids driven by ion exchange and diffusiophoresis.

Interactions between surfaces and particles in aqueous suspension are usually limited to distances smaller than 1 μm. However, in a range of studies from different disciplines, repulsion of particles has been observed over distances of up to hundreds of micrometers, in the absence of any additional external fields. Although a range of hypotheses have been suggested to account for such behavior, the physical mechanisms responsible for the phenomenon still remain unclear.

Monocytic cells become less compressible but more deformable upon activation.

Aims: Monocytes play a significant role in the development of atherosclerosis. During the process of inflammation, circulating monocytes become activated in the blood stream. The consequent interactions of the activated monocytes with the blood flow and endothelial cells result in reorganization of cytoskeletal proteins, in particular of the microfilament structure, and concomitant changes in cell shape and mechanical behavior.

Capillary micromechanics for core-shell particles.

In this work, we have developed a facile, economical microfluidic approach as well as a simple model description to measure and predict the mechanical properties of composite core-shell microparticles made from materials with dramatically different elastic properties. By forcing the particles through a tapered capillary and analyzing their deformation, the shear and compressive moduli can be measured in one single experiment. We have also formulated theoretical models that accurately capture the moduli of the microparticles in both the elastic and the non-linear deformation regimes.

Mesoscale characterization of supramolecular transient networks using SAXS and rheology.

Hydrogels and, in particular, supramolecular hydrogels show promising properties for application in regenerative medicine because of their ability to adapt to the natural environment these materials are brought into. However, only few studies focus on the structure-property relationships in supramolecular hydrogels. Here, we study in detail both the structure and the mechanical properties of such a network, composed of poly(ethylene glycol), end-functionalized with ureido-pyrimidinone fourfold hydrogen bonding units.

Towards the self-assembly of anisotropic colloids: monodisperse oblate ellipsoids.

We present a robust and straightforward method for producing colloidal particles of oblate ellipsoidal shape via thermo/mechanical stretching of elastomeric films with embedded spherical particles. Our method produces uniformly sized and shaped colloidal particles. The method can be used for producing biaxially stretched particles of different aspect ratios and volumes; moreover, the method has a higher yield and batch size than previously reported methods for producing non-spherical particles via film stretching.

Kinetic model for the mechanical response of suspensions of sponge-like particles.

A dynamic two-scale model is developed that describes the stationary and transient mechanical behavior of concentrated suspensions made of highly porous particles. Particularly, we are interested in particles that not only deform elastically, but also can swell or shrink by taking up or expelling the viscous solvent from their interior, leading to rate-dependent deformability of the particles. The fine level of the model describes the evolution of particle centers and their current sizes, while the shapes are at present not taken into account.