KTiO Nanoparticle-Loaded Porous rGO Crumples for Supercapacitors.

One-dimensional alkali metal titanates containing potassium, sodium, and lithium are of great concern owing to their high ion mobility and high specific surface area. When those titanates are combined with conductive materials such as graphene, carbon nanotube, and carbon nanofiber, they are able to be employed as efficient electrode materials for supercapacitors. Potassium hexa-titanate (KTiO, KTO), in particular, has shown superior electrochemical properties compared to other alkali metal titanates because of their large lattice parameters induced by the large radius of potassium ions.

High Potential of Aerosol-Made 3D Graphene-Based Composites for Enhanced Energy Storage.

Recently, many researchers have developed advanced energy storage and energy conversion systems to address the increased demand for energy resources. The performance of these electrochemical energy storage and conversion devices depends considerably on the properties of their unique electrode materials. Among electrode materials, graphene (GR) has attracted much attention due to its unique properties of high flexibility, a large specific surface area, and superior electric conductivity rates that are well-suited to energy storage systems.

Stacking-Controlled Assembly of Cabbage-Like Graphene Microsphere for Charge Storage Applications.

Nanostructured graphene electrodes generally have a low density, which can limit the volumetric performance for energy storage devices. The liquid-phase mild reduction process of graphene oxide sheets is combined with the continuous aerosol densification process to produce high-density graphene agglomerates in the form of microspheres. The produced graphene assembly shows the cabbage-like morphology with a high density of 0.

3 D Network-Structured Crumpled Graphene/Carbon Nanotube/Polyaniline Composites for Supercapacitors.

Crumpled graphene (CGR) is considered a promising supercapacitor material to achieve high power and energy density because it could overcome the disadvantages of 2 D GR sheets such as aggregation during the electrode fabrication process, reduction of the available surface area, and limitation of the electron and ion transport. Even though CGR shows good results, carbon materials are limited in terms of their capacitance performance. Here, we report highly enhanced supercapacitor materials by fabricating a 3 D composite containing CGR, carbon nanotubes (CNTs), and polyaniline (PANI).

One-Step Formation of Silicon-Graphene Composites from Silicon Sludge Waste and Graphene Oxide via Aerosol Process for Lithium Ion Batteries.

Over 40% of high-purity silicon (Si) is consumed as sludge waste consisting of Si, silicon carbide (SiC) particles and metal impurities from the fragments of cutting wire mixed in ethylene glycol based cutting fluid during Si wafer slicing in semiconductor fabrication. Recovery of Si from the waste Si sludge has been a great concern because Si particles are promising high-capacity anode materials for Li ion batteries. In this study, we report a novel one-step aerosol process that not only extracts Si particles but also generates Si-graphene (GR) composites from the colloidal mixture of waste Si sludge and graphene oxide (GO) at the same time by ultrasonic atomization-assisted spray pyrolysis.

One-Step Synthesis of Pt/Graphene Composites from Pt Acid Dissolved Ethanol via Microwave Plasma Spray Pyrolysis.

Pt nanoparticles-laden graphene (Pt/GR) composites were synthesized in the gas phase from a mixture of ethanol and Pt precursor by microwave plasma spray pyrolysis. The morphology of Pt/GR composites has the shape of wrinkled sheets of paper, while Pt nanoparticles (Pt NPs) that are less than 2.6 nm in the mean diameter are uniformly well deposited on the surface of GR sheets stacked in only three layers.

A swelling-suppressed Si/SiOx nanosphere lithium storage material fabricated by graphene envelopment.

A swelling-suppressed, Si nanocrystals-embedded SiOx nanospheres lithium storage material was prepared by graphene envelopment. The free void spaces formed between the graphene envelope and Si/SiOx nanospheres effectively accommodated the volume changes of Si/SiOx nanospheres during cycling, which significantly suppresses the swelling behavior and improves the capacity retention up to 200 cycles.

Aerosol-assisted extraction of silicon nanoparticles from wafer slicing waste for lithium ion batteries.

A large amount of silicon debris particles are generated during the slicing of silicon ingots into thin wafers for the fabrication of integrated-circuit chips and solar cells. This results in a significant loss of valuable materials at about 40% of the mass of ingots. In addition, a hazardous silicon sludge waste is produced containing largely debris of silicon, and silicon carbide, which is a common cutting material on the slicing saw.

3D label-free prostate specific antigen (PSA) immunosensor based on graphene-gold composites.

Highly sensitive and label-free detection of the prostate specific antigen (PSA) remains a challenge in the diagnosis of prostate cancer. Here, a novel three-dimensional (3D) electrochemical immunosensor capable of sensitive and label-free detection of PSA is reported. This unique immunosensor is equipped with a highly conductive graphene (GR)-based gold (Au) composite modified electrode.

A novel recovery of silicon nanoparticles from a waste silicon sludge.

As the semiconductor and photovoltaic industry undergo rapid growth, a large amount of silicon sludge is generated from the cutting process of silicon ingots. However, it is not effectively recycled. Recovery of nanometer-sized silicon (Si) particles from the sludge has become an important concern because the silicon sludge contains valuable resources including high purity silicon.

A glucose biosensor based on TiO2-Graphene composite.

A novel glucose biosensor was developed based on the adsorption of glucose oxidase at a TiO(2)-Graphene (GR) nanocomposite electrode. A TiO(2)-GR composite was synthesized from a colloidal mixture of TiO(2) nanoparticles and graphene oxide (GO) nanosheets by an aerosol assisted self-assembly (AASA). The particle morphology of all TiO(2)-GR composites was spherical in shape.

Oil absorbing graphene capsules by capillary molding.

Oil absorbing graphene capsules are synthesized by capillary molding of graphene oxide (GO) sheets against a polystyrene bead template in evaporating aerosol droplets, followed by simultaneous reduction of GO and decomposition of the polymer template during ultrasonic spray pyrolysis.

Preparation of nanoporous SiO2 particles and their application in drug release control.

Nanoporous SiO2 particles which have different pore size and volume were prepared from a colloidal mixture of nano-sized silica particles by a spray heating method. The prepared nanoporous SiO2 particles were employed as a drug carrier to investigate the release behaviors of methylene blue (MB) as a model drug for a selected period of time. The concentration of released MB from the porous particles was measured by a UV-Vis spectroscopy with respect to time.

Preparation and characterization of vanadium-doped ZnO nanoparticles for environmental application.

Vanadium-doped ZnO nanoparticles (ZnO:V) were prepared via flame spray pyrolysis (FSP) from a mixed aqueous solution of zinc hydroxide and vanadyl (IV) acetylacetonate. The morphological, structural and optical properties of the ZnO:V photocatalyst were characterized via transmission electron microscopy (TEM), X-ray powder diffraction (XRD), and UV-visible diffused reflection spectrum (DRS). The photocatalytic activity of ZnO:V was evaluated via photocatalytic degradation of methylene blue (MB).

Pore size-controlled synthesis and characterization of nanostructured silica particles.

Silica nano-materials with meso- and macroporosity are of great interest due to their variety of potential applications. For the application as a catalytic supporter, nanostructured spherical silica particles having both mesopores and macropores were prepared by using an aerosol templating method with colloidal mixtures of polystyrene latex (PSL) particles and silica nanoparticles. The as-prepared particles showed bimodal size distribution consisting of mesopores ranging 2-20 nm and macropores ranging 60-160 nm.

Fabrication of porous nanostructured TiO2 particles by an aerosol templating method.

An aerosol templating method was applied to fabricate the spherical nanostructured TiO2 particles containing both mesopores and macropores using two kinds of colloidal mixture such as polystyrene latex (PSL) particles and TiO2 nanoparticles (P25), and PSL and a titanium hydroxybislactato (TC315). As the weight ratio of PSL/P25 increased from 0 to 1.30, morphology of the as-prepared particles changed from mesoporous particles to particles containing mesopores and macropores.

Calibration of Polarization-Sensitive and Dual-Angle Laser Light Scattering Methods Using Standard Latex Particles.

A polarization-sensitive laser light scattering (PSLLS) method and a dual-angle laser light scattering (DALLS) method have been studied for in situ measurement of submicrometer hydrosol and aerosol particles. By using standard monodisperse polystyrene latex particles suspended in water and air as test particles, calibration of systems built based on the above methods have been performed. The effects of light scattered by agglomerated aerosol particles (multiplets) were corrected by considering the fraction of multiplets as determined with an aerosol measurement technique using a differential mobility analyzer.