Space-Confinement and in Situ Reduction of Pt with 1T-MoS for Exceptional Hydrogen Evolution Reaction in Simulated Seawater.

Efficient catalysts for hydrogen generation from seawater are essential for advancing clean energy technologies. In this study, we present a straightforward method for producing Pt nanoparticles enclosed within metallic 1T-phase MoS nanosheets on graphite paper as a promising catalyst for the hydrogen evolution reaction (HER). The resulting 14.

One-Step Synthesis of Graphene-Covered Silver Nanowires with Enhanced Stability for Heating and Strain Sensing.

Solution-processed silver nanowire (AgNW) networks have been considered as promising electrode candidates for next-generation electronic devices. However, they suffer from poor thermal and electrical stability and low mechanical properties, hindering their practical applications. In this work, graphene nanosheets are successfully introduced into AgNW via a facile one-step solvothermal process.

Synergistic barium titanate/MXene composite as a high-performance piezo-photocatalyst for efficient dye degradation.

Piezo-photocatalysis combines photocatalysis and piezoelectric effects to enhance catalytic efficiency by creating an internal electric field in the photocatalyst, improving carrier separation and overall performance. This study presents a high-performance piezo-photocatalyst for efficient dye degradation using a synergistic barium titanate (BTO)-MXene composite. The composite was synthesized via a facile method, combining the unique properties of BTO nanoparticles with the high conductivity of MXene.

Multi-Interface Engineering of MXenes for Self-Powered Wearable Devices.

Self-powered wearable devices with integrated energy supply module and sensitive sensors have significantly blossomed for continuous monitoring of human activity and the surrounding environment in healthcare sectors. The emerging of MXene-based materials has brought research upsurge in the fields of energy and electronics, owing to their excellent electrochemical performance, large surface area, superior mechanical performance, and tunable interfacial properties, where their performance can be further boosted via multi-interface engineering. Herein, a comprehensive review of recent progress in MXenes for self-powered wearable devices is discussed from the aspects of multi-interface engineering.

Enhanced Piezocatalytic Performance of Li-doped BaTiO Through a Facile Sonication-Assisted Precipitation Approach.

Piezocatalysis-induced dye degradation has garnered significant attention as an effective method for addressing wastewater treatment challenges. In our study, we employed a room-temperature sonochemical method to synthesize piezoelectric barium titanate nanoparticles (BaTiO3: BTO) with varying levels of Li doping. This approach not only streamlined the sample preparation process but also significantly reduced the overall time required for synthesis, making it a highly efficient and practical method.

Graphene and MOF Assembly: Enhanced Fabrication and Functional Derivative via MOF Amorphization.

The integration of graphene and metal-organic frameworks (MOFs) has numerous implications across various domains, but fabricating such assemblies is often complicated and time-consuming. Herein, a one-step preparation of graphene-MOF assembly is presented by directly impregnating vertical graphene (VG) arrays into the zeolitic imidazolate framework (ZIF) precursors under ambient conditions. This approach can effectively assemble multiple ZIFs, including ZIF-7, ZIF-8, and ZIF-67, resulting in their uniform dispersion on the VG with adjustable sizes and shapes.

Combined Molecular and Morphological Imaging of CTCs for HER2-Targeted Chemotherapy Guidance.

Since biomolecules change dynamically with tumor evolution and drug treatment, it is necessary to confirm target molecule expression in real time for effective guidance of subsequent chemotherapy treatment. However, current methods to confirm target proteins require complex processing steps and invasive tissue biopsies, limiting their clinical utility for targeted treatment monitoring. Here, CTCs, as a promising liquid biopsy source, were used to molecularly characterize the target protein HER2.

Introduction to Supercapacitors.

Guest editors Zhaojun Han, Ruopian Fang, Dewei Chu, Da-Wei Wang and Kostya (Ken) Ostrikov, introduce this themed issue on supercapacitors.

G3'MTMD3 in the insect GABA receptor subunit, RDL, confers resistance to broflanilide and fluralaner.

Meta-diamides (e.g. broflanilide) and isoxazolines (e.

Enhancing the Electrochemical Properties of Nickel-Rich Cathode by Surface Coating with Defect-Rich Strontium Titanate.

Ni-rich layered ternary cathodes (i.e., LiNiCoMO, M = Mn or Al, + + = 1 and ≥ 0.

Engineering work functions of cobalt-doped manganese oxide based electrocatalysts for highly efficient oxygen evolution reaction.

The crystalline and electronic structures are two important factors for the design of electrocatalysts. In this work, Co-doped MnO electrocatalysts grown on nickel foam (NF) were prepared by a facile hydrothermal reaction, followed by H treatment process. The electrocatalytic performance of MnO was significantly improved after doping with Co and the CoMnO-NF sample achieved excellent oxygen evolution reaction (OER) performance with low overpotential (370 mV at 10 mA cm) and reasonable Tafel slope (85.

Separation and single-cell analysis for free gastric cancer cells in ascites and peritoneal lavages based on microfluidic chips.

Backgrounds: Detecting free cancer cells from ascites and peritoneal lavages is crucial for diagnosing gastric cancer (GC). However, traditional methods are limited for early-stage diagnosis due to their low sensitivity.

Methods: A label-free, rapid, and high-throughput technique was developed for separating cancer cells from ascites and peritoneal lavages using an integrated microfluidic device, taking advantage of dean flow fractionation and deterministic lateral displacement.

Advances in high-voltage supercapacitors for energy storage systems: materials and electrolyte tailoring to implementation.

To achieve a zero-carbon-emission society, it is essential to increase the use of clean and renewable energy. Yet, renewable energy resources present constraints in terms of geographical locations and limited time intervals for energy generation. Therefore, there is a surging demand for developing high-performance energy storage systems (ESSs) to effectively store the energy during the peak time and use the energy during the trough period.

Atomically Dispersed Cu Catalysts on Sulfide-Derived Defective Ag Nanowires for Electrochemical CO Reduction.

Single-atom catalysts (SACs) have shown potential for achieving an efficient electrochemical CO reduction reaction (CO2RR) despite challenges in their synthesis. Here, AgS/Ag nanowires provide initial anchoring sites for Cu SACs (Cu/AgS/Ag), then Cu/Ag(S) was synthesized by an electrochemical treatment resulting in complete sulfur removal, i.e.

New insights into transmission pathways and possible off-target effects of insecticidal dsRNA released by treated plants.

RNAi has shown great potential in controlling pests and pathogens, and dsRNA-based pesticides have been used in different ways. Due to off-target effects, the transmission pathways and possible impacts of dsRNA on non-target organisms after release should be researched. Here, we tested pathways of dsRNA transmission through the rice-hopper-spider food chain and their efficiency for triggering RNAi.

Bimetallic RuNi-decorated Mg-CUK-1 for oxygen-tolerant carbon dioxide capture and conversion to methane.

The development of hybrid sorbent/catalysts for carbon capture and conversion to chemical fuels involves several material and engineering design considerations. Herein, a metal-organic framework (MOF), known as Mg-CUK-1, is loaded with Ru and Ni nanoparticles and assessed as a hybrid material for the sequential capture and conversion of carbon dioxide (CO) to methane (CH). Low nanocatalyst loadings led to enhanced overall performance by preserving more CO uptake within the Mg-CUK-1 sorbent.

Recent Development of Moisture-Enabled-Electric Nanogenerators.

Power generation by converting energy from the ambient environment has been considered a promising strategy for developing decentralized electrification systems to complement the electricity supply for daily use. Wet gases, such as water evaporation or moisture in the atmosphere, can be utilized as a tremendous source of electricity by emerging power generation devices, that is, moisture-enabled-electric nanogenerators (MEENGs). As a promising technology, MEENGs provided a novel manner to generate electricity by harvesting energy from moisture, originating from the interactions between water molecules and hydrophilic functional groups.

Stabilizing the Unstable: Chromium Coating on NiMo Electrode for Enhanced Stability in Intermittent Water Electrolysis.

Hydrogen production through water electrolysis is a promising method to utilize renewable energy in the context of urgent need to phase out fossil fuels. Nickel-molybdenum (NiMo) electrodes are among the best performing non-noble metal-based electrodes for hydrogen evolution reaction in alkaline media (alkaline HER). Albeit exhibiting stable performance in electrolysis at a constant power supply (i.

Rationalized design of hyperbranched trans-scale graphene arrays for enduring high-energy lithium metal batteries.

Lithium (Li) metal anode have shown exceptional potential for high-energy batteries. However, practical cell-level energy density of Li metal batteries is usually limited by the low areal capacity (<3 mAh cm) because of the accelerated degradation of high-areal capacity Li metal anodes upon cycling. Here, we report the design of hyperbranched vertical arrays of defective graphene for enduring deep Li cycling at practical levels of areal capacity (>6 mAh cm).

RNA-dependent RNA polymerase could extend the lasting validity period of exogenous dsRNA.

Background: Previous studies have found that pesticide double-stranded (ds)RNA usually has a long-lasting validity period in plants. However, it is uncertain if any factors in plants could extend dsRNA duration. It has been reported that RNA-dependent RNA polymerases (RdRP) in plants and some other eukaryotes could catalyze RNA amplification and be involved in RNAi (interference).

Surface Functionalization of Electrodes and Synthesis of Dual-Phase Solid Electrolytes for Structural Supercapacitors.

The interface between structural electrodes and solid electrolytes plays a key role in the electrical-mechanical properties of energy storage structures. Herein, we present a surface functionalization method to improve the ion conduction efficiency at the interface between a structural electrode and a solid electrolyte that consists of a bi-continuous network of epoxy and ionic liquid (IL). Composite supercapacitors made with this electrolyte and carbon fiber (CF) electrodes coated with manganese dioxide (MnO) demonstrate that treating the electrodes with the silane can increase the areal capacitance by 300% without degrading the tensile strength.

Modulating Pt-O-Pt atomic clusters with isolated cobalt atoms for enhanced hydrogen evolution catalysis.

Platinum is the most efficient catalyst for hydrogen evolution reaction in acidic conditions, but its widespread use has been impeded by scarcity and high cost. Herein, Pt atomic clusters (Pt ACs) containing Pt-O-Pt units were prepared using Co/N co-doped carbon (CoNC) as support. Pt ACs are anchored to single Co atoms on CoNC by forming strong interactions.

Comparative transcriptome and RNA interference reveal CYP6DC1 and CYP380C47 related to lambda-cyhalothrin resistance in Rhopalosiphum padi.

The bird-cherry-oat aphid, Rhopalosiphum padi, is a serious agricultural pest of Triticeae crops, and pyrethroids are the most widely used chemical pesticides for the control of the aphid. Our previous studies found that some R. padi field populations have developed resistance against pyrethroids; an M918L target-site mutation of the voltage gated sodium channel was present in the pyrethroid resistant individuals, while the high-level resistance to lambda-cyhalothrin revealed the presence of other mechanisms in the pest.