Engineered eco-friendly composite membranes with superhydrophobic/hydrophilic dual-layer for DCMD system.

Considerable advancements have been made in the development of hydrophobic membranes for membrane distillation (MD). Nonetheless, the environmentally responsible disposal of these membranes poses a critical concern due to their synthetic composition. Herein, an eco-friendly dual-layered biopolymer-based membrane was fabricated for water desalination.

Engineering of Multifunctional Nanocomposite Membranes for Wastewater Treatment: Oil/Water Separation and Dye Degradation.

Multifunctional membrane technology has gained tremendous attention in wastewater treatment, including oil/water separation and photocatalytic activity. In the present study, a multifunctional composite nanofiber membrane is capable of removing dyes and separating oil from wastewater, as well as having antibacterial activity. The composite nanofiber membrane is composed of cellulose acetate (CA) filled with zinc oxide nanoparticles (ZnO NPs) in a polymer matrix and dipped into a solution of titanium dioxide nanoparticles (TiO NPs).

Membranes for Oil/Water Separation: A Review.

Recent advancements in separation and membrane technologies have shown a great potential in removing oil from wastewaters effectively. In addition, the capabilities have improved to fabricate membranes with tunable properties in terms of their wettability, permeability, antifouling, and mechanical properties that govern the treatment of oily wastewaters. Herein, authors have critically reviewed the literature on membrane technology for oil/water separation with a specific focus on: 1) membrane properties and characterization, 2) development of various materials (e.

Synthesis of Carbon-Supported PdIrNi Catalysts and Their Performance towards Ethanol Electrooxidation.

Direct ethanol fuel cells (DEFCs) have shown a high potential to supply energy and contribute to saving the climate due to their bioethanol sustainability and carbon neutrality. Nonetheless, there is a consistent need to develop new catalyst electrodes that are active for the ethanol oxidation reaction (EOR). In this work, two C-supported PdIrNi catalysts, that have been reported only once, are prepared via a facile NaBH co-reduction route.

Development and Characterization of Cellulose/Iron Acetate Nanofibers for Bone Tissue Engineering Applications.

In tissue engineering, design of biomaterial with a micro/nano structure is an essential step to mimic extracellular matrix (ECM) and to enhance biomineralization as well as cell biocompatibility. Composite polymeric nanofiber with iron particles/ions has an important role in biomineralization and collagen synthesis for bone tissue engineering. Herein, we report development of polymeric cellulose acetate (CA) nanofibers (17 wt.

Engineering and Characterization of Antibacterial Coaxial Nanofiber Membranes for Oil/Water Separation.

In the present study, a coaxial nanofiber membrane was developed using the electrospinning technique. The developed membranes were fabricated from hydrophilic cellulose acetate (CA) polymer and hydrophobic polysulfone (PSf) polymer as a core and shell in an alternative way with addition of 0.1 wt.

Strategic design of a Mussel-inspired in situ reduced Ag/Au-Nanoparticle Coated Magnesium Alloy for enhanced viability, antibacterial property and decelerated corrosion rates for degradable implant Applications.

Magnesium (Mg) and its alloys have attracted much attention as a promising candidate for degradable implant applications however the rapid corrosion of magnesium inside the human body greatly limits its use as an implant material. Therefore, coating the alloy surface with a multifunctional film is a promising way to overcome the drawbacks. Here we propose for the first time a multifunction layer coating to enhance the cell viability, antibacterial property and decelerated corrosion rates to act as a novel material to be used for degradable implant Applications.

A Multifunctional Zinc Oxide/Poly(Lactic Acid) Nanocomposite Layer Coated on Magnesium Alloys for Controlled Degradation and Antibacterial Function.

In the present work, magnesium (Mg) AZ31 alloy was coated with a multifunctional membrane layer composed of ZnO nanoparticles (NPs) embedded in a poly(lactic acid) (PLA) matrix. We aimed to produce a stable coating that would be used to control the degradation rate of the Mg alloy and promote a local antibacterial activity. ZnO NPs were dispersed at 5 and 10 wt % in a PLA solution and dip-coated onto the AZ31 substrate.

Facile synthesis of TiO/ZrO nanofibers/nitrogen co-doped activated carbon to enhance the desalination and bacterial inactivation via capacitive deionization.

Capacitive deionization, as a second generation electrosorption technique to obtain water, is one of the most promising water desalination technologies. Yet; in order to achieve high CDI performance, a well-designed structure of the electrode materials is needed, and is in high demand. Here, a novel composite nitrogen-TiO/ZrO nanofibers incorporated activated carbon (NACTZ) is synthesized for the first time with enhanced desalination efficiency as well as disinfection performance towards brackish water.

High-performance glucose biosensor based on chitosan-glucose oxidase immobilized polypyrrole/Nafion/functionalized multi-walled carbon nanotubes bio-nanohybrid film.

A highly electroactive bio-nanohybrid film of polypyrrole (PPy)-Nafion (Nf)-functionalized multi-walled carbon nanotubes (fMWCNTs) nanocomposite was prepared on the glassy carbon electrode (GCE) by a facile one-step electrochemical polymerization technique followed by chitosan-glucose oxidase (CH-GOx) immobilization on its surface to achieve a high-performance glucose biosensor. The as-fabricated nanohybrid composite provides high surface area for GOx immobilization and thus enhances the enzyme-loading efficiency. The structural characterization revealed that the PPy-Nf-fMWCNTs nanocomposite films were uniformly formed on GCE and after GOx immobilization, the surface porosities of the film were decreased due to enzyme encapsulation inside the bio-nanohybrid composite materials.

Development of polyamide-6,6/chitosan electrospun hybrid nanofibrous scaffolds for tissue engineering application.

The development of biofunctional and bioactive hybrid polymeric scaffolds seek to mitigate the current challenges in the emerging field of tissue engineering. In this paper, we report the fabrication of a biomimetic and biocompatible nanofibrous scaffolds of polyamide-6,6 (PA-6,6) blended with biopolymer chitosan via one step co-electrospinning technique. Different weight percentage of chitosan 10wt%, 15wt%, and 20wt% were blended with PA-6,6, respectively.