Glassy and compressed nanoemulsions stabilized with sodium dodecyl sulfate in the presence of poly(ethylene glycol)-diacrylate.

The rheology of concentrated nanoemulsions is critical for their formulation in various applications, such as pharmaceuticals, foods, cosmetics, and templating advanced materials. The rheological properties of nanoemulsions depend on interdroplet interactions, Laplace pressure, dispersed phase volume fraction, and continuous phase properties. The interdroplet forces can be tuned by background electrolytes (, charge screening), surfactant type, the excess surfactant micelle concentration, and depletant molecules such as polymer chains.

Novel MXene-Modified Polyphenyl Sulfone Membranes for Functional Nanofiltration of Heavy Metals-Containing Wastewater.

In this work, MXene as a hydrophilic 2D nanosheet has been suggested to tailor the polyphenylsulfone (PPSU) flat sheet membrane characteristics via bulk modification. The amount of MXene varied in the PPSU casting solution from 0-1.5 wt.

Biological and bioactivity assessment of dextran nanocomposite hydrogel for bone regeneration.

Insufficient biological and bioactive properties of dextran hydrogels limit their applications as promising scaffolds for tissue engineering. We developed nanocomposite dextran hydrogels comprised of bioactive glass (nBGC: 64% SiO2, 31% CaO, 5% PO) nanoparticles with an average particle size of 77 nm using a chemical crosslinking of dextran chains to form 3D hydrogel networks. In the current study; bioactivity of the obtained nanocomposite hydrogels was evaluated through the formation of apatite crystal structures after the incubation in simulated body fluid (SBF) at various submersion periods and nBGC content.

Interdroplet Interactions and Rheology of Concentrated Nanoemulsions for Templating Porous Polymers.

In the current study, we investigate the colloidal behavior of nanoemulsions over a wide range of oil volume fractions (φ) from dilute to concentrated regime The dilute system contains 25% silicone oil dispersed in the aqueous phase consisting of poly(ethylene glycol)-diacrylate (PEGDA) and sodium dodecyl sulfate (SDS), which is concentrated through evaporation of water at two different rates at ambient temperature. The rheological studies show that the liquid-like nanoemulsions transform into viscoelastic gels at a volume fraction of ∼30%. The plateau storage modulus of the nanoemulsions increases in the semidilute systems (φ below 45%) and then decreases steadily with increasing φ up to 60%.

Fabrication and physicochemical characterization of a novel magnetic nanocomposite scaffold: Electromagnetic field effect on biological properties.

In the current research, a novel poly(ε-caprolactone) nanofibrous composite scaffold including CZF-NPs (cobalt‑zinc ferrite nanoparticles) was investigated to study the physical, mechanical and biological properties of new magnetic nanofibrous materials and then to evaluate the effect of applied electromagnetic field on biological properties of these scaffolds. It was observed that the incorporation of CZF-NPs up to 3 wt.% leads to decrease in nanofibers' diameter to 466 nm.

Dextran hydrogels incorporated with bioactive glass-ceramic: Nanocomposite scaffolds for bone tissue engineering.

A series of nanocomposite scaffolds comprised of dextran (Dex) and sol-gel derived bioactive glass ceramic nanoparticles (nBGC: 0-16 (wt%)) were fabricated as bioactive scaffolds for bone tissue engineering. Scanning electron microscopy showed Dex/nBGC scaffolds were consisting of a porous 3D microstructure with an average pore size of 240 μm. Energy-dispersive x-ray spectroscopy illustrated nBGC nanoparticles were homogenously distributed within the Dex matrix at low nBGC content (2 wt%), while agglomeration was observed at higher nBGC contents.

Effects of chain length of the cross-linking agent on rheological and swelling characteristics of dextran hydrogels.

Rheological characteristics during chemical gelation of semidilute solutions of dextran in the presence of cross-linking agents of different chain length are reported. Effects of cross-linker chain length on the gel point, structure of the gel network, and mechanical properties were investigated. The rheological results disclose that for all systems, the gelation process proceeds over a long time and both the complex viscosity and the power law exponent reveal that solid-like gel structures are formed in the post-gel region.

Exploring the effect of formulation parameters on the particle size of carboxymethyl chitosan nanoparticles prepared via reverse micellar crosslinking.

Carboxymethyl chitosan (CMCh), as a non-toxic, biocompatible and biodegradable semi-synthetic biopolymer with mucoadhesive properties, is widely investigated for targeting drug or gene delivery applications. Here, fabrication of CMCh nanoparticles will be reported using a reverse (w/o) micellar system to provide particles with tuneable mean sizes. Reverse microemulsions were prepared by dispersing aqueous solution of CMCh in n-hexane using sodium-bis(ethylhexyl)-sulfosuccinate (AOT) and glutaraldehyde (GA) as an emulsifier and a crosslinking agent, respectively.

Rheological Study and Molecular Dynamics Simulation of Biopolymer Blend Thermogels of Tunable Strength.

The temperature-induced gelation of chitosan/glycerophosphate (Chs/GP) systems through physical interactions has shown great potential for various biomedical applications. In the present work, hydroxyethyl cellulose (HEC) was added to the thermosensitive Chs/GP solution to improve the mechanical strength and gel properties of the incipient Chs/HEC/GP gel in comparison with the Chs/GP hydrogel at body temperature. The physical features of the macromolecular complexes formed by the synergistic interaction between chitosan and hydroxyethyl cellulose in the presence of β-glycerophosphate disodium salt solution have been studied essentially from a rheological point of view.

An engineering approach to design of dextran microgels size fabricated by water/oil emulsification.

A correlation, based on fluid mechanics, has been investigated for the mean particle diameter of crosslinked dextran microgels (CDMs) prepared via a water/oil emulsification methodology conducted in a single-stirred vessel. To this end, non-dimensional correlations were developed to predict the mean particle size of CDMs as a function of Weber number, Reynolds number and viscosity number similar to ones introduced for liquid-liquid dispersions. Moreover, a Rosin-Rammler distribution function has been successfully applied to the microgel particle size distributions.

Effective parameters in determining cross-linked dextran microsphere characteristics: screening by Plackett-Burman design-of-experiments.

This study aims to screen the effective parameters in preparing cross-linked dextran microspheres (CDMs) to make them controllable for obtaining microspheres with tunable properties. Microspheres were prepared by chemical crosslinking of dextran dissolved in internal phase of an inverse emulsion system (W/O) using epichlorohydrin (ECH). A Plackett-Burman design-of-experiments was employed as the screening methodology to investigate the effects of the kinetics and process parameters, i.