Mechanical and Physicochemical Characteristics of a Novel Premixed Calcium Silicate Sealer.

The aim of the present in vitro study was to evaluate specific mechanical and physicochemical properties of three calcium silicate-based sealers, BioRoot™ Flow (BRF), CeraSeal (CRS) and TotalFill (TF). Samples were prepared to evaluate different physicochemical and mechanical properties of the tested sealers. These evaluations were accomplished by investigating the pH changes over time, porosity, roughness, flow properties, compressive strength and wettability.

Biomechanical characterization of cadaveric brachial plexus regions using uniaxial tensile tests.

Introduction: The proximal regions of the brachial plexus (roots, trunks) are more susceptible to permanent damage due to stretch injuries than the distal regions (cords, terminal branches). A better description of brachial plexus mechanical behavior is necessary to better understand deformation mechanisms in stretch injury. The purpose of this study was to model the biomechanical behavior of each portion of the brachial plexus (roots, trunks, cords, peripheral nerves) in a cadaveric model and report differences in elastic modulus, maximum stress and maximum strain.

Shear bond strength between standard or modified zirconia surfaces and two resin cements incorporating or not 10-MDP in their matrix.

Objective: This study aimed first to compare the shear bond strength between zirconia samples luted to enamel with a 10-MDP- containing resin cement (Panavia F2.0, Kuraray, Japan) and those luted with a resin cement using a separated 10-MDP monomer-containing bottle (Panavia V5, Kuraray, Japan). The second objective was to evaluate the bond stability after 150 days of aging in water, between enamel and zirconia ceramic surface enhanced with a glass-ceramic coating.

Do the Mechanical Properties of Calcium-Silicate-Based Cements Influence the Stress Distribution of Different Retrograde Cavity Preparations?

The aim of the present study was to investigate the influence of the mechanical properties of three different calcium-silicate-based cements on the stress distribution of three different retrograde cavity preparations. Biodentine™ "BD", MTA Biorep "BR", and Well-Root™ PT "WR" were used. The compression strengths of ten cylindrical samples of each material were tested.

Stronger than Ever: Multifilament Fiberglass Posts Boost Maxillary Premolar Fracture Resistance.

This paper investigates the influence of cavity configuration and post-endodontic restoration on the fracture resistance, failure mode and stress distribution of premolars by using a method of fracture failure test and finite elements analysis (FEA) coupled to Weibull analysis (WA). One hundred premolars were divided into one control group (G) ( = 10) and three experimental groups, according to the post-endodontic restoration ( = 30), G, restored using composite, G, restored using single fiber post and G, restored using multifilament fiberglass posts (m-FGP) without post-space preparation. Each experimental group was divided into three subgroups according to the type of coronal cavity configuration ( = 10): G, G and G with occlusal (O) cavity configuration; G, G, and G with mesio-occlusal (MO); and G, G, and G with mesio-occluso-distal (MOD).

Physicochemical and Mechanical Properties of Premixed Calcium Silicate and Resin Sealers.

The aim of the present in vitro study was to evaluate specific mechanical and physicochemical properties of two calcium silicate based sealers, (AH Plus Bioceramic “AHPB”; Well-Root ST “WRST”), and a conventional resin sealer (AH Plus “AHP”). These aims were accomplished by assessing the porosity, pH, compression strength, roughness, wettability and cell attachment of the tested materials. The results were compared statistically using the one-way ANOVA test.

Experimental study of risk of medial hinge fracture during distal femoral varus osteotomy.

Introduction: Lateral opening wedge distal femoral osteotomy (LOWDFO) is indicated for isolated lateral osteoarthritis in the valgus morphotype. Medial hinge fracture is a factor for poor prognosis. The present study had two aims: (1) to assess the impact of a temporary K-wire on hinge fracture risk; and (2) to assess the impact of LOWDFO opening speed.

Compressive Strength and Porosity Evaluation of Innovative Bidirectional Spiral Winding Fiber Reinforced Composites.

The aim of this in vitro study was to investigate the compressive strength and the bulk porosity of a bidirectional (bFRC) and an experimental bidirectional spiral winding reinforced fiber composite (bswFRC). Cylindrical-shape specimens were prepared for each material group and processed for the evaluation of compressive strength after different storage conditions (dry, 1 and 3 months) in distilled water at 37 °C. The specimens were also assessed for the degree of bulk porosity through X-ray tomography.

Experimental investigation of the risk of lateral cortex fracture during valgus tibial osteotomy.

Background: Valgus-producing medial opening-wedge proximal tibial osteotomies (V-MOW-PTO) are used to treat isolated medial-compartment knee osteoarthritis in patients with varus malalignment. A fracture of the lateral cortical hinge is a risk factor for poor outcomes. Implantation of a protective K-wire has been suggested to prevent this complication.

Torsional, Static, and Dynamic Cyclic Fatigue Resistance of Reciprocating and Continuous Rotating Nickel-Titanium Instruments.

Introduction: The aim of this study was to evaluate torsional, dynamic, and static cyclic fatigue resistance of the reciprocating One RECI (OR; Micromega, Besançon, France), WaveOne Gold (WOG; Dentsply Maillefer, Ballaigues, Switzerland), rotary One Curve (OC, MicroMega), and ProTaper Next X2 (PTN X2; Dentsply Sirona, Charlotte, NC) instruments.

Methods: A total of 120 OR (n = 30), WOG (n = 30), OC (n = 30), and PTN X2 (n = 30) nickel-titanium instruments were used. Torque and rotation angle until failure under static torsion loading were measured according to ISO 3630-1.

Does Multi-Fiber-Reinforced Composite-Post Influence the Filling Ability and the Bond Strength in Root Canal?

The purpose of the present in vitro study was to investigate the bond strength of root canal dentin and the filling ability of a new multi-fiber-reinforced composite post (mFRC) compared to a conventional single fiber-reinforced-composite post (sFRC). Twenty-eight freshly maxillary first permanent single-rooted premolars were instrumented and divided into groups ( = 14). Group 1: single-fiber-reinforced composite (sFRC), group 2: multi-fiber-reinforced composite (mFRC).

Dual role of tannic acid and pyrogallol incorporated in plaster of Paris: Morphology modification and release for antimicrobial properties.

The design of bioactive plasters is of major interest for the amelioration of dental and bone cements. In this article, a one pot and environmentally friendly strategy based on the addition of a cheap polyphenol-tannic acid (TA) or the main phenolic constituent of TA, namely pyrogallol (PY)- able to interact with calcium sulfate is proposed. Tannic acid and pyrogallol not only modify the morphology of the obtained plaster+TA/PY composites but a part of it is released and provides strong-up to twenty fold- antibacterial effect against Staphylococcus aureus.

Antibacterial and Bonding Properties of Universal Adhesive Dental Polymers Doped with Pyrogallol.

This study investigated the antibacterial activity, bond strength to dentin (SBS), and ultra-morphology of the polymer-dentin interface of experimental adhesive systems doped with pyrogallol (PY), which is a ubiquitous phenolic moiety that is present in flavonoids and polyphenols. A universal adhesive containing 4-META and 10-MDP was used in this study. PY behaves as an antioxidant and anti-cancerogenic agent and it was incorporated into the adhesive at different concentrations (0.

Tannic acid speeds up the setting of mineral trioxide aggregate cements and improves its surface and bulk properties.

Hypothesis: The setting time and mechanical properties of cements are a major technical concern for a long time in civil engineering. More recently those practical problems became a major concern for biomedical applications -in bone surgery and in dentistry- in particular concerning the setting time which should be minimized. The possibility to add organic additives to interact with the different constituting ions in cements constitutes a way to modify the setting kinetics.

Influence of the grade on the variability of the mechanical properties of polypropylene waste.

The prior properties of recycled polypropylene depend on the origin of waste deposits and its chemical constituents. To obtain specific properties with a predefine melt flow index of polypropylene, the suppliers of polymer introduce additives and fillers. However, the addition of additives and/or fillers can modify strongly the mechanical behaviour of recycled polypropylene.