Increased prevalence of erythema multiforme in patients with COVID-19 infection or vaccination.

Several reports stated that erythema multiforme (EM) was associated with COVID-19 with detrimental outcomes in patients. However, since most of these are case reports, it is challenging to quantitively assess their associations. Therefore, our study aims to determine the prevalence of EM in the context of COVID-19.

Lichen planus after COVID-19 infection and vaccination.

Background: Lichen planus is one of the common adverse reactions after COVID-19 infection and vaccination. Despite it being reported in several case reports, the literature including a large sample of the studied population is lacking. The current study was performed to assess the risk of LP after COVID-19 infection as well as COVID-19 vaccination.

Corrosion Passivation in Simulated Body Fluid of Ti-Zr-Ta-xSn Alloys as Biomedical Materials.

The powder metallurgy method was used to manufacture three Ti-based alloys: Ti-15%Zr-2%Ta-4%Sn (Ti-Zr-Ta-4Sn), Ti-15%Zr-2%Ta-6%Sn (Ti-Zr-Ta-6Sn), and Ti-15%Zr-2%Ta-8%Sn (Ti-Zr-Ta-8Sn). Electrochemical measurements and surface analyses were used to determine the effect of Sn concentration on the corrosion of these alloys after exposure to a simulated body fluid (SBF) solution for 1 h and 72 h. It was found that the passivation of the alloy surface significantly increased when the Sn content increased from 4% to 6% and then to 8%, which led to a significant reduction in corrosion.

Association between tonsillectomy and oropharyngeal cancer risk: a retrospective cohort study.

Background: The purpose of this retrospective cohort study is to describe the association between the history of tonsillectomy and the risk of oropharyngeal squamous cell carcinoma (OPSSC), using a large cohort of patients.

Materials And Methods: We performed a retrospective cohort study with 3620 patients diagnosed with OPٍSCC from 2010 to 2021. We utilized the University of Florida patients' registry i2b2 system.

A rare presentation of a mucocele in a separate compartment of maxillary sinus.

Maxillary sinus is frequently presented as a single space within each maxilla. It drains directly into the nose through the middle meatus. We are reporting the second rare case of a mucocele in a separate compartment of maxillary sinus in a 26-year-old patient without a history of facial trauma.

Influence of Tantalum Addition on the Corrosion Passivation of Titanium-Zirconium Alloy in Simulated Body Fluid.

Ti-15%Zr alloy and Ti-15%Zr-2%Ta alloy were fabricated to be used in biomedical applications. The corrosion of these two alloys after being immersed in simulated body fluid for 1 h and 72 h was investigated. Different electrochemical methods, including polarization, impedance, and chronoamperometric current with time at 400 mV were employed.

Alloy Design and Fabrication of Duplex Titanium-Based Alloys by Spark Plasma Sintering for Biomedical Implant Applications.

Very often, pure Ti and (α + β) Ti-6Al-4V alloys have been used commercially for implant applications, but ensuring their chemical, mechanical, and biological biocompatibility is always a serious concern for sustaining the long-term efficacy of implants. Therefore, there has always been a great quest to explore new biomedical alloying systems that can offer substantial beneficial effects in tailoring a balance between the mechanical properties and biocompatibility of implantable medical devices. With a view to the mechanical performance, this study focused on designing a Ti-15Zr-2Ta-Sn (where = 4, 6, 8) alloying system with high strength and low Young's modulus prepared by a powder metallurgy method.

Attitudes of Critical Care Nurses towards Teamwork and Patient Safety in Saudi Arabia: A Descriptive Cross-Sectional Assessment.

The study aimed to assess the teamwork and safety attitudes among the critical care unit (CCU) nurses in Saudi Arabia. A descriptive cross-sectional study was carried out in public tertiary hospitals in Al-Madinah, Saudi Arabia. All participants answered a three-part questionnaire that included demographic data, a teamwork attitude questionnaire (T-TAQ), and the Safety Attitudes Questionnaire (SAQ).

Medical Students' Perception Regarding the Re-emerging Monkeypox Virus: An Institution-Based Cross-Sectional Study From Saudi Arabia.

Introduction:  The recent multi-nation outbreaks of human monkeypox in non-endemic areas have created an emerging public health issue. Medical students who will become future healthcare providers are directly associated with community people and can easily sensitize the general population, so it is crucial to assess their degree of knowledge and attitudes regarding recently emerging infections or pathogens. However, studies on medical students' perception of the monkeypox virus are scarce in Saudi Arabia.

Multiple oral squamous cell carcinoma 6 years after allogeneic stem cell transplantation complicated with chronic graft-versus-host disease: A case report.

Oral squamous cell carcinoma is a potential long-term complication after hematopoietic stem cell transplantation. This may be related to mechanisms including radiation and chemotherapy regimens, chronic graft-versus-host disease, inflammation, and prolonged immunosuppression. The current case describes the development of multiple oral white thick keratotic lesions in the floor of the mouth and the tongue 6 years after hematopoietic stem cell transplantation complicated with chronic graft-versus-host disease.

Silver Micro-Nanoparticle-Based Nanoarchitectures: Synthesis Routes, Biomedical Applications, and Mechanisms of Action.

Silver has become a potent agent that can be effectively applied in nanostructured nanomaterials with various shapes and sizes against antibacterial applications. Silver nanoparticle (Ag NP) based-antimicrobial agents play a major role in different applications, including biomedical applications, as surface treatment and coatings, in chemical and food industries, and for agricultural productivity. Due to advancements in nanoscience and nanotechnology, different methods have been used to prepare Ag NPs with sizes and shapes reducing toxicity for antibacterial applications.

Should anosmia and dysgeusia be a concern for oral and maxillofacial surgeons during the COVID-19 pandemic?

Purpose: Dysgeusia and anosmia have been liked to COVID-19 infection. The aim of this study is to study the prevalence of dysgeusia and anosmia in COVID-19 patients treated at the University of Florida Health Center and establish the odds of having an olfactory and gustatory disorder with a confirmed COVID-19 infection.

Methods: This is a retrospective cross-sectional study utilizing the University of Florida Health Center patients' registry i2b2 platform to search for ICD 10 diagnoses of COVID-19 infection and taste and smell disturbances.

Cadmium Selenide Quantum Dots for Solar Cell Applications: A Review.

Quantum dot-sensitized solar cells (QDSSCs) are significant energy-producing devices due to their remarkable capability to growing sunshine and produce many electrons/holes pairs, easy manufacturing, and low cost. However, their power conversion efficiency (4%) is usually worse than that of dye-sensitized solar cells (≤12%); this is mainly due to their narrow absorption areas and the charge recombination happening at the quantum dot/electrolyte and Ti /electrolyte interfaces. Thus, to raise the power conversion efficiency of QDSSC, new counter electrodes, working electrodes, sensitizers, and electrolytes are required.

Post Processing Strategies for the Enhancement of Mechanical Properties of ENMs (Electrospun Nanofibrous Membranes): A Review.

Electrospinning is a versatile technique which results in the formation of a fine web of fibers. The mechanical properties of electrospun fibers depend on the choice of solution constituents, processing parameters, environmental conditions, and collector design. Once electrospun, the fibrous web has little mechanical integrity and needs post fabrication treatments for enhancing its mechanical properties.

Magnetic/Polyetherimide-Acrylonitrile Composite Nanofibers for Nickel Ion Removal from Aqueous Solution.

In this study, a magnetic/polyetherimide-acrylonitrile composite nanofiber membrane with effective adsorption of nickel ions in an aqueous solution was created using a simple electrospinning method. Iron oxide nanoparticles (NPs) were stirred and ultrasonically dispersed into a polyetherimide-acrylonitrile solution to create a homogenous NPs suspension, which was placed in an electrospinning machine to produce a uniform and smooth nanofiber composite membrane. Nanoparticle incorporation into this membrane was confirmed using scanning electron microscope, energy dispersive X-ray spectroscopy (EDX), Fourier-transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and NPs aqueous stability from a leaching test.

Scaling-up medical technologies using flexographic printing.

Medical technologies, such as point-of-care devices and biological and chemical assays which rely on functional materials deposited on top of substrates, are in great demand due to an increase in the prevalence of diseases worldwide. A significant number of these medical technologies are still in their infancy with respect to commercialization because of the high cost, material and complexity of the conventionally available fabrication techniques. As a result, medical technologies, in broad terms, require low cost and mass production fabrication methods in order to overcome the commercialization challenges.

Superior Mechanical Performance of Inductively Sintered Al/SiC Nanocomposites Processed by Novel Milling Route.

This paper explores new routes for flake powder metallurgy, with the aim of designing an effective route for fabricating metal matrix nanocomposites, combining high strength and good ductility. A new route that uses three speeds, instead of the two speeds characterizing the shift-speed ball milling (SSBM) route, has been suggested and implemented. The mechanisms of these routes were illustrated based on the intensity of ball-powder-ball collisions and the morphology evolution.

WS: A New Window Layer Material for Solar Cell Application.

Radio frequency (RF) magnetron sputtering was used to deposit tungsten disulfide (WS) thin films on top of soda lime glass substrates. The deposition power of RF magnetron sputtering varied at 50, 100, 150, 200, and 250 W to investigate the impact on film characteristics and determine the optimized conditions for suitable application in thin-film solar cells. Morphological, structural, and opto-electronic properties of as-grown films were investigated and analyzed for different deposition powers.

Facile and efficient 3-chlorophenol sensor development based on photolumenescent core-shell CdSe/ZnS quantum dots.

Quantum dots (QDs) are semiconducting inorganic nanoparticles, tiny molecules of 2-10 nm sizes to strength the quantum confinements of electrons. The QDs are good enough to emit light onto electrons for exciting and returning to the ground state. Here, CdSe/ZnS core/shell QDs have been prepared and applied for electrochemical sensor development in this approach.

Composite nanofibers membranes of poly(vinyl alcohol)/chitosan for selective lead(II) and cadmium(II) ions removal from wastewater.

The nanofibers membranes were fabricated by poly(vinyl alcohol)/chitosan (PVA/Chi) using an electro-spun technique for selective and high adsorption of lead (Pb(II)) and cadmium (Cd(II)) ions based on the solution acidity. The PVA/Chi NFs membranes were characterized systematically using several instrumentations. In addition, several experimental parameters such as initial metal ions concentration, interaction time, adsorbent dosage, solution pH and the effects of competing ions on Pb(II) and Cd(II) adsorption were evaluated.

Titanium Carbide Nanofibers-Reinforced Aluminum Compacts, a New Strategy to Enhance Mechanical Properties.

TiC nanofibers reinforced Al matrix composites were produced by High Frequency Induction Heat Sintering (HFIHS).The titanium carbide nanofibers with an average diameter of 90 nm are first prepared by electrospinning technique and high temperature calcination process. A composite solution containing polyacrylonitrile and titanium isopropoxide is first electrospun into the nanofibers, which are subsequently stabilized and then calcined to produce the desired TiC nanofibers.