Effective biofilm control in a membrane biofilm reactor using a quenching bacterium (Rhodococcus sp. BH4).

The biofilm thickness in membrane biofilm reactors (MBfRs) is an important factor affecting system performance because excessive biofilm formation on the membrane surface inhibits gas diffusion to the interior of the biofilm, resulting in a significant reduction in the performance of contaminant removal. This study provides innovative insights into the control of biofilm thickness in O -based MBfRs by using the quorum quenching (QQ) method. The study was carried out in MBfRs operated at different gas pressures and hydraulic retention times (HRTs) using QQ beads containing Rhodococcus sp.

Simultaneous oxidation of ammonium and tetracycline in a membrane aerated biofilm reactor.

The membrane aerated biofilms reactor (MABR) is an emerging technology in wastewater treatment with particular advantages including high rate nitrification, and very high oxygen transfer efficiencies. In this study a synthetic feed water incorporating tetracycline (TC) was investigated in a MABR. Simultaneous removal of ammonium and tetracycline (TC) in the reactor, formation of TC transformation products (TPs), and microbial community analysis in the biofilm growing on the membrane were performed.

Degradation of oxytetracycline under autotrophic nitrifying conditions in a membrane aerated biofilm reactor and community fingerprinting.

Pharmaceuticals in waterbodies are a growing concern due to their extensive uses and adverse effects on aquatic life. Oxytetracycline (OTC) is one of tetracycline antibiotic group used for treatment of animals and humans. This study evaluates the simultaneous oxidation of OTC and ammonium under autotrophic nitrifying conditions by using a membrane aerated biofilm reactor (MABR) as it provides an appropriate environment for the antibiotic-degrading bacteria.

Comprehensive evaluation of autohydrogenotrophic membrane biofilm reactor treating OTC-enriched water medium.

In the recent years, there has been considerable debate about the potential impacts of antibiotics present in various environments on the public health and ecology. Oxytetracycline (OTC) is one of tetracycline antibiotic group used for growth and treatment of animals and humans. In this study, OTC and nitrate (NO-N) were simultaneously reduced using a hydrogen-based membrane biofilm reactor (H-MBfR).

Performance and microbial shift during acidification of a real pharmaceutical wastewater by using an anaerobic sequencing batch reactor (AnSBR).

In this study, a lab-scale anaerobic sequencing batch reactor (AnSBR) was used for the acidification of a pharmaceutical wastewater sourced from etodolac chemical synthesis tanks. The effects of the organic loading rate (OLR), and etodolac and sulfate concentrations on the acidification rate and microbial community in AnSBR were investigated at 35 °C with a hydraulic retention time (HRT) of 37 h, a pH of 5, and OLRs up to 5.2 kgCOD/m·day.

Hydrogen-based membrane biofilm reactor for tetracycline removal: biodegradation, transformation products, and microbial community.

Tetracycline (TC) in aqueous environment could be reductively degraded by using a hydrogen-based membrane biofilm reactor (H-MBfR) under denitrifying conditions as it provides an appropriate environment for the antibiotic-degrading bacteria in biofilm communities. This study evaluates the performance of H-MBfR for simultaneous removal of nitrate and TC, formation of degradation products of TC, and community analysis of the biofilm grown on the gas-permeable hollow fiber membranes. Hence, a H-MBfR receiving approximately 20 mg N/l nitrate and 0.

Chlortetracycline removal by using hydrogen based membrane biofilm reactor.

In the last years, increasing attention has been paid on the presence of antibiotics in aqueous environments due to their ecological damage and potential adverse effects on organisms. Membrane biofilm reactors (MBfR) have been gained a significant popularity as an advanced wastewater treatment technology in removing of organic micro-pollutants. In this study, the performance of H-MBfR for simultaneous removal of nitrate and chlortetracycline, formation of transformation products and community analysis of the biofilm grown on the gas permeable hollow fiber membranes was evaluated by considering effect of the hydraulic retention time, surface loadings of target pollutants and H pressure.

Combination of a novel electrode material and artificial mediators to enhance power generation in an MFC.

This study focuses on two main aspects: developing a novel cost-effective electrode material and power production from domestic wastewater using three different mediators. Methylene blue (MB), neutral red (NR) and 2-hydroxy-1,4-naphthoquinone (HNQ) were selected as electrode mediators with different concentrations. A tin-coated copper mesh electrode was tested as anode electrode.

Comprehensive comparison of a new tin-coated copper mesh and a graphite plate electrode as an anode material in microbial fuel cell.

This paper summarizes the comparison of a new tin-coated copper (t-coating Cu) mesh electrode with a graphite plate electrode for potential power generation and biocompatibility in a microbial fuel cell (MFC). The study, which used domestic wastewater, demonstrated that t-coating Cu mesh electrode produced a power density (271 mW/m(2)) approximately three times higher than that produced by a graphite electrode (87 mW/m(2)). Scanning electron microscopy (SEM) results revealed that bacterial morphology on the two electrodes significantly varied.

Bio-reduction of tetrachloroethen using a H2-based membrane biofilm reactor and community fingerprinting.

Chlorinated ethenes in drinking water could be reductively dechlorinated to non-toxic ethene by using a hydrogen based membrane biofilm reactor (H2-MBfR) under denitrifying conditions as it provides an appropriate environment for dechlorinating bacteria in biofilm communities. This study evaluates the reductive dechlorination of perchloroethene (PCE) to non-toxic ethene (ETH) and comparative community analysis of the biofilm grown on the gas permeable membrane fibers. For these purposes, three H2-MBfRs receiving three different chlorinated ethenes (PCE, TCE and DCE) were operated under different hydraulic retention times (HRTs) and H2 pressures.

Removal of tetracycline and oxytetracycline by microscale zerovalent iron and formation of transformation products.

The main objective of this study was to determine the removal mechanism of tetracycline (TC) and oxytetracycline (OTC) by microscale zerovalent iron (mZVI) and the formation of transformation products during their removal studies. Solution pH, iron dose, and reaction temperature were studied with a batch experimental series in order to evaluate the removal efficiency of TC and OTC and the adsorption kinetics. The results showed that pH was a key factor in removing both tetracycline compounds, although increasing the temperature and iron dose enhanced their removal efficiency.

Effect of biogas sparging with different membrane modules on membrane fouling in anaerobic submerged membrane bioreactor (AnSMBR).

This study focused on the effect of biogas sparging and different membrane modules such as cylinder shaped, funnel-shaped, and U-shaped on the membrane fouling behavior in a lab-scale submerged anaerobic membrane bioreactor (AnSMBR) which was operated for over 60 days. In order to investigate the membrane fouling behavior, a series of analysis such as SMP, EPS, scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), particle size distribution, and filtration resistances were performed. Although the rapid generation of cake layer took placed in case of the absence of biogas sparging, the membrane module design mostly influenced the membrane resistance when biogas sparging was applied.

Bioelectricity production using a new electrode in a microbial fuel cell.

Electrode materials play a key role in enhancing the electricity generation in the microbial fuel cell (MFC). In this study, a new material (Ti-TiO(2)) was used as an anode electrode and compared with a graphite electrode for electricity generation. Current densities were 476.

Performance of a sulfide-oxidizing, sulfur-producing membrane biofilm reactor treating sulfide-containing bioreactor effluent.

Sulfide-containing waste streams are generated in mining, petrochemical plants, tanneries, viscose rayon manufacture, and the gasification of coal. Colorless sulfur bacteria can oxidize sulfide to elemental sulfur (S°), which can be recovered, when oxygen is their electron acceptor. This study evaluated sulfide oxidation and S° recovery in an oxygen-based membrane biofilm reactor (MBfR) treating the effluent from a sulfidogenic anaerobic baffled reactor.

Effect of anions on removing Cu2+, Mn2+ and Zn2+ in electrocoagulation process using aluminum electrodes.

In the present study, the performance of electrocoagulation process with aluminum electrodes in the treatment of Cu(2+), Zn(2+) and Mn(2+) containing aqueous solutions was investigated by depending on type of anion in solution, considering some operating conditions such as initial metal concentration and pH. Results obtained from synthetic wastewater showed that type of anion in solutions has a significant effect on the metal removal. The initial concentration of zinc influenced significantly the performance of electrocoagulation process as compared with the results obtained from Mn and Cu metals.

Joint treatment of landfill leachate with municipal wastewater by submerged membrane bioreactor.

Young leachate was a high strength wastewater with regard to carbon and nitrogen matter, and up to now many researchers have focused on a number of treatment methods to treat the leachate. By using various treatment processes, joint treatment of leachate with domestic wastewater, resulted from same community, is one of the most significant methods because domestic wastewater has either larger mass or lower strength than leachate. In this study, a submerged membrane bioreactor (sMBR) was used for treatment of blending wastewater, including differential mixture ratios of domestic wastewater and leachate.

Removal of Pb from sewage sludge by electrokinetics: effect of pH and washing solution type.

In this study, the effect of pH and washing solution on the removal of lead from sewage sludge by electrokinetics was investigated. The six experimental runs were carried out at two different pH values--3 and 4--using acetic acid, nitric acid and phosphoric acid. In addition, the sequential chemical extraction scheme according to the BCR's (Community Bureau of Reference) guidelines was applied to the sludge samples to evaluate the effect of acidic solutions on Pb fractionation during electrokinetic processes.

Stripping/flocculation/membrane bioreactor/reverse osmosis treatment of municipal landfill leachate.

This study presents a configuration for the complete treatment of landfill leachate with high organic and ammonium concentrations. Ammonia stripping is performed to overcome the ammonia toxicity to aerobic microorganisms. By coagulation-flocculation process, COD and suspended solids (SS) were removed 36 and 46%, respectively.

Effect of EDTA as washing solution on removing of heavy metals from sewage sludge by electrokinetic.

This paper presents the effect of ethylene diamine tetraacetic acid (EDTA) as a washing solution on the electrokinetic process for removal of Cr, Pb and Zn from sewage sludge. The sequential chemical extraction scheme according to the guidelines of BCR (Community Bureau of Reference) was applied to the sludge samples to evaluate the effect of EDTA on metal fractionation during electrokinetic processes. The highest removals of the heavy metals were 34% for Cr, 27% for Pb and 20% for Zn with 0.

Simultaneous removal of organic matter and nitrogen compounds by combining a membrane bioreactor and a membrane biofilm reactor.

Hydrogen-based membrane biofilm reactors (MBfR) have been applied to the denitrification of nitrate-containing water and wastewater. Adding an aerobic membrane bioreactor (MBR) to a MBfR provides significant nitrification and organic oxidation because most wastewater also contains a significant concentration of organic material and ammonium nitrogen. This study describes experiments that investigate the removal of organic and nitrogenous compounds in the combined MBR/MBfR system.

Simultaneous removal of organic matter and nitrogen compounds by an aerobic/anoxic membrane biofilm reactor.

The hydrogen-based membrane biofilm reactor (MBfR) has been well studied and applied for denitrification of nitrate-containing water and wastewater. Adding an oxygen-based MBfR allows total-nitrogen removal when the input nitrogen is ammonium. However, most wastewaters also contain a significant concentration or organic material, measured as chemical oxygen demand (COD).

Evaluation for agricultural usage with speciation of heavy metals in a municipal sewage sludge.

This study was carried out to evaluate the agricultural usage of an anaerobically digested sludge in the contents and fractions of heavy metals. Therefore, a sequential extraction scheme according to the BCR's (Community Bureau of Reference) guidelines and total acid digestion were applied to sewage sludge samples. The results of total heavy metal concentrations in sewage sludge showed that the highest total concentrations were Fe, Zn and Mn.

Modeling of submerged membrane bioreactor treating cheese whey wastewater by artificial neural network.

A submerged membrane bioreactor receiving cheese whey was modeled by artificial neural network and its performance over a period of 100 days at different solids retention times was evaluated with this robust tool. A cascade-forward network was used to model the membrane bioreactor and normalization was used as a preprocessing method. The network was fed with two subsets of operational data, with two-thirds being used for training and one-third for testing the performance of the artificial neural network.

Adsorption of nickel(II) from aqueous solution onto activated carbon prepared from almond husk.

Activated carbon was prepared from almond husk by activating without (MAC-I) and with (MAC-II) H(2)SO(4) at different temperatures. The ability of the activated carbon to remove nickel(II) ions from aqueous solutions by adsorption has been investigated under several conditions such as pH, carbonisation temperature of husk, initial concentration of metal ions, contact time, and adsorbent concentration. Optimal conditions were pH 5.

Determination of degradation of radioactivity and its kinetics in aerobic composting.

In this study, the kinetics of disappearance of radioactivity in aerobic composting was investigated. For this purpose, compost materials were prepared by mixing sugar beet wastes, wine factory wastes (grape wastes), straw and biological treatment sludge in different amounts. While alpha-radioactivity was not initially detected in all composting materials, the composting materials had some beta-radioactivity.