Particle-size effects on the entropy behavior of a LixFePO4 electrode.

The particle-size effects on the thermodynamic properties and kinetic behavior of a Li(x)FePO(4) electrode have a direct influence on the electrode properties. Thus, the development of high-performance Li-ion batteries containing a Li(x)FePO(4) cathode requires a complete understanding of the reaction mechanism at the atomic/nano/meso scale. In this work, we report electrochemical calorimetric and potentiometric studies on Li(x)FePO(4) electrodes with different particle sizes and clarify the particle-size effect on the reaction mechanism based on the entropy change of (de)lithiation.

Oxidation reaction of polyether-based material and its suppression in lithium rechargeable battery using 4 V class cathode, LiNi1/3Mn1/3Co1/3O2.

The all solid-state lithium battery with polyether-based solid polymer electrolyte (SPE) is regarded as one of next-generation lithium batteries, and has potential for sufficient safety because of the flammable-electrolyte-free system. It has been believed that polyether-based SPE is oxidized at the polymer/electrode interface with 4 V class cathodes. Therefore, it has been used for electric devices such as organic transistor, and lithium battery under 3 V.

Relationships between center atom species (N, P) and ionic conductivity, viscosity, density, self-diffusion coefficient of quaternary cation room-temperature ionic liquids.

The physicochemical properties (ionic conductivity, viscosity, density, and self-diffusion coefficient) of tri-n-ethylpentylphosphonium bis(trifluoromethanesulfonyl)amide (TEPP-TFSA) ionic liquid were compared with those of tri-n-ethylpentylammonium bis(trifluoromethanesulfonyl)amide (TEPA-TFSA). Compared with the TEPA-TFSA ionic liquid, the density and viscosity of the phosphorus ionic liquid are lower, although the ionic conductivity and self-diffusion coefficient are higher. The molar conductivities were compared for the values obtained by the electrochemical impedance method (electrochemical conductivity) and the calculated from the pulsed-gradient spin-echo nuclear magnetic resonance method (diffusive conductivity).

Phase transition and conductive acceleration of phosphonium-cation-based room-temperature ionic liquid.

An unusual ionic conduction phenomenon related to the phase transition of a novel phosphonium-cation-based room-temperature ionic liquid (RTIL) is reported; we found that in the phase change upon cooling, a clear increase in ionic conductivity was seen as the temperature was lowered, which differs from widely known conventional RTILs; clearly, our finding of abnormality of the correlation between temperature change and ionic conduction is the first observation in the electrolyte field.

Quaternary ammonium room-temperature ionic liquid including an oxygen atom in side chain/lithium salt binary electrolytes: ab initio molecular orbital calculations of interactions between ions.

Interactions of the lithium bis(trifluoromethylsulfonyl)amide (LiTFSA) complex with N, N-diethyl-N-methyl-N-(2-methoxyethyl) ammonium (DEME), 1-ethyl-3-methylimidazolium (EMIM) cations, neutral diethylether (DEE), and the DEMETFSA complex were studied by ab initio molecular orbital calculations. An interaction energy potential calculated for the DEME cation with the LiTFSA complex has a minimum when the Li atom has contact with the oxygen atom of DEME cation, while potentials for the EMIM cation with the LiTFSA complex are always repulsive. The MP2/6-311G**//HF/6-311G** level interaction energy calculated for the DEME cation with the LiTFSA complex was -18.

Quaternary ammonium room-temperature ionic liquid including an oxygen atom in side chain/lithium salt binary electrolytes: ionic conductivity and 1H, 7Li, and 19F NMR studies on diffusion coefficients and local motions.

A room-temperature ionic liquid (RTIL) of a quaternary ammonium cation having an ether chain, N,N-diethyl-N-methyl-N-(2-methoxyethyl)ammonium bis(trifluoromethylsulfonyl)amide (DEME-TFSA), is a candidate for use as an electrolyte of lithium secondary batteries. In this study, the electrochemical ionic conductivity, sigma, of the neat DEME-TFSA and DEME-TFSA-Li doped with five different concentrations of lithium salt (LiTFSA) was measured and correlated with NMR measurements of the diffusion coefficients D and the spin-lattice relaxation times T1 of the individual components DEME (1H), TFSA (19F), and lithium ion (7Li). The ion conduction of charged ions can be activated with less thermal energy than ion diffusion which contains a contribution from paired ions in DEME-TFSA.

Direct in situ observation of dynamic transport for electrolyte components by NMR combined with electrochemical measurements.

Electrochemical studies provide broad, but not cation- or anion-specific information on the migration of charged ions. However, individual ion diffusion (as a weighted average of charged and neutral ions) can be measured using pulsed-gradient spin-echo (PGSE) NMR. In this paper, the lithium transport in an electrolyte including a lithium salt was measured using electrophoretic NMR (ENMR) with non-blocking electrodes.

Investigation on the arrangement of lithium ions in LixLa(1/3)NbO3 with perovskite structure.

The relationship between the Li arrangement and the electrochemical behavior has been examined as a function of composition x in electrochemically lithiated A-site deficient perovskite, Li(x)()La(1/3)NbO(3). The cell potential diagram and powder X-ray diffraction (XRD) study indicated that the Li ions are inserted into the vacant Perovskite A-site with an electrochemical reaction. In addition, the derivatives of the cell potential diagram showed three cathodic peaks, indicating a stepwise Li insertion mechanism takes place.

Lithium secondary batteries using modified-imidazolium room-temperature ionic liquid.

Highly reversible, safe lithium secondary batteries that use imidazolium-cation-based room-temperature ionic liquid as an electrolyte and lithium metal as an anode material were realized by the molecular design. To achieve higher reduction stability, an electron-donating substituent was introduced to promote charge delocalization in the imidazolium cation of room-temperature ionic liquids.

Relationship between the electrochemical behavior and Li arrangement in Li(x)M(y)Mn(2-y)O4 (M = Co, Cr) with spinel structure.

The relationship between the electrochemical behavior and the arrangement of lithium/vacancies has been investigated with electrochemical Li removal in Li(x)M(y)Mn(2-y)O4 (x < or = 1.0, 0.0 < or = y < or = 0.

Highly reversible lithium metal secondary battery using a room temperature ionic liquid/lithium salt mixture and a surface-coated cathode active material.

For the purpose of realizing high-voltage, high-capacity, long-life and safe rechargeable batteries, a lithium secondary battery that uses high-voltage stable ZrO2-coated LiCoO2 cathode powder and a nonvolatile high-safety room temperature ionic liquid was fabricated.