Dynamic Marine Atmospheric Corrosion Behavior of AZ91 Mg Alloy Sailing from Yellow Sea to Western Pacific Ocean.

In this work, the dynamic marine atmospheric corrosion behavior of AZ91 Mg alloy sailing from Yellow Sea to Western Pacific Ocean was studied. The corrosion rates were measured using the weight loss method. The microstructure, phase, and chemical composition of corroded samples were investigated by SEM, EDS, XRD, and XPS.

Understanding and Designing a High-Performance Ultrafiltration Membrane Using Machine Learning.

Ultrafiltration (UF) as one of the mainstream membrane-based technologies has been widely used in water and wastewater treatment. Increasing demand for clean and safe water requires the rational design of UF membranes with antifouling potential, while maintaining high water permeability and removal efficiency. This work employed a machine learning (ML) method to establish and understand the correlation of five membrane performance indices as well as three major performance-determining membrane properties with membrane fabrication conditions.

Design and synthesis of a new bioactive compound for marine antifouling inspired by natural products.

A marine antifouling compound, -octyl-2-hydroxybenzamide (OHBA), inspired by ceramide and paeonol molecules, was created. First, methyl salicylate was synthesized with salicylic acid and methanol, followed by -octylamine through an ester-amine condensation reaction. Fourier transform infrared spectroscopy, nuclear magnetic resonance spectroscopy, and mass spectrometry confirmed the characteristic structure of the OHBA compound.

Lipid nanotubes: Formation and applications.

Lipids, the fundamental components of cell membrane, play important roles in the whole cycle of cell life, thus attracting worldwide attention, owing to their physicochemical property and extensive use in the applications based on lipid assemblies. Compared with liposomes, lipid nanotubes (LNTs) usually possess unique properties, such as highly ordered structure, precise molecular recognition, and the possibility of substance transport, thus providing more potential applications in different research fields. However, until now, there are still quite rare cases of LNTs successfully employed in practical applications.

Revolutionizing Membrane Design Using Machine Learning-Bayesian Optimization.

Polymeric membrane design is a multidimensional process involving selection of membrane materials and optimization of fabrication conditions from an infinite candidate space. It is impossible to explore the entire space by trial-and-error experimentation. Here, we present a membrane design strategy utilizing machine learning-based Bayesian optimization to precisely identify the optimal combinations of unexplored monomers and their fabrication conditions from an infinite space.

Incorporation of Cellulose Nanocrystals into Graphene Oxide Membranes for Efficient Antibiotic Removal at High Nutrient Recovery.

Two-dimensional (2D) material-based membranes hold great promise in wastewater treatment. However, it remains challenging to achieve highly efficient and precise small molecule/ion separation with pure 2D material-fabricated lamellar membranes. In this work, laminated graphene oxide (GO)-cellulose nanocrystal (CNC) hybrid membranes (GO/CNC) were fabricated by taking advantages of the unique structures and synergistic effects generated from these two materials.

Robust cellulose-based composite adsorption membrane for heavy metal removal.

Adsorptive membranes offer an effective mode to remove heavy metal ions from contaminated water, due to the synergies made possible by low-cost, high-affinity adsorbents and highly scalable filtration in one system. However, the development of adsorptive membranes is hampered by their instability in the aqueous phase and low binding affinity with a broad spectrum of heavy metals in a reasonable flux. Herein, a regenerated cellulose support membrane is strongly grafted with stable and covalent-bonded polyelectrolyte active layers synthesized by a reactive layer-by-layer (LBL) assembly method.

Study on the Transport Mechanism of a Freestanding Graphene Oxide Membrane for Forward Osmosis.

Graphene oxide membranes (GOMs) are promising separation technologies. In forward osmosis (FO), we found that the water flux from the feed solution to the draw solution can prevent ions from diffusing to the feed solution in a highly tortuous and porous GOM. In reverse osmosis (RO), we found that the salt rejection is low compared to that in commercially available RO membranes.

Two-Dimensional TiCT MXene/GO Hybrid Membranes for Highly Efficient Osmotic Power Generation.

Osmotic power has emerged as one of the promising candidates for clean and renewable energy. However, the advancement of present osmotic power-harvesting technologies, specifically pressure-retarded osmosis (PRO) in this work, is hindered by the unsatisfactory membrane transport properties. Herein, we demonstrate the freestanding transition-metal carbides and graphene oxide hybrid membranes as high-performance PRO membranes.

Low-Grade Waste Heat Recovery via an Osmotic Heat Engine by Using a Freestanding Graphene Oxide Membrane.

The osmotic heat engine represents a new and promising technology for the harvesting of low-grade waste heat from various sources. However, the lack of an adequate semipermeable membrane hinders the technology's advancement. In this study, we investigated the application of a freestanding graphene oxide membrane (GOM) for energy generation in an osmotic heat engine.

Correction: Preparation of Mo nanopowders through electroreduction of solid MoS in molten KCl-NaCl.

Correction for 'Preparation of Mo nanopowders through electroreduction of solid MoS in molten KCl-NaCl' by Haiping Gao et al., Phys. Chem.

Behavior and Potential Impacts of Metal-Based Engineered Nanoparticles in Aquatic Environments.

The specific properties of metal-based nanoparticles (NPs) have not only led to rapidly increasing applications in various industrial and commercial products, but also caused environmental concerns due to the inevitable release of NPs and their unpredictable biological/ecological impacts. This review discusses the environmental behavior of metal-based NPs with an in-depth analysis of the mechanisms and kinetics. The focus is on knowledge gaps in the interaction of NPs with aquatic organisms, which can influence the fate, transport and toxicity of NPs in the aquatic environment.

Enhanced Ionic Conductivity and Power Generation Using Ion-Exchange Resin Beads in a Reverse-Electrodialysis Stack.

Reverse electrodialysis (RED) is a promising technique for harvesting energy by mixing seawater with river water. The energy production is usually limited by ionic conductivity in dilute compartments of a RED system. Novel tests were conducted in this research, which used ion-exchange resin beads (IERB) to replace nonconductive spacer fabrics in RED compartments with dilute NaCl solution in a modified stack containing Fumasep FKS and Fumasep FAS membranes.

Preparation of Mo nanopowders through electroreduction of solid MoS2 in molten KCl-NaCl.

Electrolysis of MoS2 to produce Mo nanopowders and elemental sulfur has been studied in an equimolar mixture of NaCl and KCl at 700 °C. The reduction mechanism was investigated by cyclic voltammetry (CV), potentiostatic and constant voltage electrolysis together with spectroscopic and scanning electron microscopic analyses. The reduction pathway was identified to be MoS2 → LxMoS2 (x ≤ 1, L = Na or K) → L3Mo6S8 and LMo3S3 → Mo, and the last step to format metallic Mo was found to be relatively slow in kinetics.

Developmental toxicity of diclofenac and elucidation of gene regulation in zebrafish (Danio rerio).

Environmental pollution by emerging contaminants, e.g. pharmaceuticals, has become a matter of widespread concern in recent years.

Binding of triclosan to human serum albumin: insight into the molecular toxicity of emerging contaminant.

Purpose: The interaction between triclosan (TCS) and human serum albumin (HSA) was investigated in order to obtain the binding mechanism, binding constant, the type of binding force, the binding distance between the donor and acceptor, and the effect of TCS on the conformation change of HSA.

Methods: A HSA solution was added to the quartz cell and then titrated by successive addition of TCS. The fluorescence quenching spectra and synchronous spectra were recorded with the excitation and emission slits of the passage of band set at 10 and 20 nm.

Potential toxicity of sulfanilamide antibiotic: binding of sulfamethazine to human serum albumin.

Antibiotics are widely used in daily life but their abuse has posed a potential threat to human health. The interaction between human serum albumin (HSA) and sulfamethazine (SMZ) was investigated by capillary electrophoresis, fluorescence spectrometry, and circular dichroism. The binding constant and site were determined to be 1.

Interactions of acidic pharmaceuticals with human serum albumin: insights into the molecular toxicity of emerging pollutants.

Acidic pharmaceuticals such as diclofenac (DCF), clofibric acid (CA) and ketoprofen (KTP) have been detected frequently in environmental media. In order to reveal the toxicity of such emerging pollutants, their interactions with human serum albumin (HSA) were investigated by capillary electrophoresis, molecular spectrometry, and equilibrium dialysis. The binding constants and sites of these acidic pharmaceuticals with HSA were obtained.