Comparative Proteomics and Metabonomics Analysis of Different Diapause Stages Revealed a New Regulation Mechanism of Diapause in (Lepidoptera: Pyralidae).

Histone acetylation is an important epigenetic mechanism that has been shown to play a role in diapause regulation. To explore the physiological and molecular mechanisms of histone deacetylase in the diapause process, LC-MS/MS analysis was used to perform TMT proteomic and metabolomic analysis on non-diapause (ND), pre-diapause (PreD), diapause (D), cold treatment (CT), and post-diapause (RD) stages of the meadow moth. A total of 5367 proteins were identified by proteomics, including 1179 differentially expressed proteins.

Specially Structured AgCuTi Foil Enables High-Strength and Defect-Free Brazing of Sapphire and Ti6Al4V Alloys: The Microstructure and Fracture Characteristics.

A novel AgCuTi brazing foil with a unique microstructure was developed, which could achieve strong vacuum brazing of Ti6Al4V (TC4) and sapphire. The brazing foil was composed of Ag solid solution (Ag(s,s)), Cu solid solution (Cu(s,s)), and layered Ti-rich phases, and had a low liquidus temperature of 790 °C and a narrow melting range of 16 °C, facilitating the defect-free joining of TC4 and sapphire. The sapphire/TC4 joint fabricated by using this novel AgCuTi brazing foil exhibited an outstanding average shear strength of up to 132.

Mallard hindlimbs locomotion system respond to changes in sandy ground hardness and slope.

Mallards inhabit soft grounds such as mudflats, marshes, and beaches, demonstrating remarkable proficiency in traversing these grounds. This adeptness is closely linked to the adjustments in the operation of their hindlimbs. This study employs high-speed videography to observe postural adjustments during locomotion across mudflats.

Active Adaptive Strategies of Mallard Feet in Response to Changes in Wetness and Compactness of the Sand Terrain.

Mallards (Anas platyrhynchos) exhibit exceptional locomotive abilities in diverse terrains, such as beaches, swamps, and tidal flats. This capability is primarily attributed to their unique webbed toe structure and cooperative locomotion posture of their feet. Therefore, this study aims to further delve into the active adaptive strategies of mallard feet in response to diverse external environmental conditions.

Prediction of potential distributions of and in China.

Changes in the habitats of species can provide insights into the impact of climate change on their habitats. Species in the genus (Morinoideae) are perennial herbaceous plants that are mainly distributed in the South Asian Mountains and Eastern Mediterranean. In China, there are four species and two varieties of this genus distributed across the Yunnan, Sichuan, Qinghai, and Gansu provinces.

Syntheses of Tetracyclic Indoline Derivatives Via Gold(I)-Catalyzed Hydroamination/Cycloisomerization Cascade of 2-Ethynyltryptamides.

A gold(I)-catalyzed hydroamination/cycloisomerization cascade reaction was developed to yield indolizino[8,7-]indole and indolo[2,3-]-quinolizine derivatives from 2-ethynyltryptamides. The optimal conditions were determined by condition screening, and the functional group tolerances of these reactions were explored based on synthetic substrates. An insight into the explanation on the selectivity of the ring closure was obtained by density functional theory calculations.

From the Analysis of Anatomy and Locomotor Function of Biological Foot Systems to the Design of Bionic Foot: An Example of the Webbed Foot of the Mallard.

This study utilized the mallard's foot as the subject, examining the bone distribution via computed tomography (CT) and analyzing pertinent parameters of the tarsometatarsal bones. Additionally, gross anatomy methods were employed to elucidate the characteristics of the toes and webbing bio-structures and their material composition. Biologically, the mallard's foot comprises tarsometatarsal bones and 10 phalanges, enveloped by fascia, tendons, and skin.

The Impact of Hemispheric Activity Priming on Choking Under Pressure in Badminton Tasks: A Study of Three Fundamental Skills.

Choking under pressure occurs when an individual experiences a decrease in performance despite their efforts to perform well. The self-focus approach suggests that pressure increases conscious attention on the performance process, disrupting the automatic or overlearned nature of execution. Hemispheric asymmetries in the brain and skilled performance indicate that left-hemispheric activity decreases, while right-hemispheric activity enhances.

Automatic Recognition of Concealed Fish Bones under Laryngoscopy: A Practical AI Model Based on YOLO-V5.

Background: Fish bone impaction is one of the most common problems encountered in otolaryngology emergencies. Due to their small and transparent nature, as well as the complexity of pharyngeal anatomy, identifying fish bones efficiently under laryngoscopy requires substantial clinical experience. This study aims to create an AI model to assist clinicians in detecting pharyngeal fish bones more efficiently under laryngoscopy.

Biotoxicity of Halide Perovskites in Mice.

Halide perovskites are crystalline semiconductors with exceptional optoelectronic properties, rapidly developing toward large-scale applications. Lead (II) (Pb ) is the core element used to prepare halide perovskites. Pb can displace key 2+ elements, including calcium, zinc and iron, that regulate vital physiological functions.

Effects of particle size and thickness of quartz sand on the webbed foot kinematics of mallard (Anas platyrhynchos).

The webbed foot structure of mallards (Anas platyrhynchos) exhibits effective anti-subsidence properties when walking on soft ground. To investigate the effects of quartz sand particle size and thickness on joint angles and the movement patterns of webbed feet, we created a testing substrate with quartz sand and utilized high-speed cameras and kinematic analysis tools for data acquisition. Mallards mainly adjusted the tarsometatarso-phalangeal joint (TMTPJ) during touch-down and lift-off stages in response to increasing particle size or enhanced ground roughness.

Reduced electron relaxation time of perovskite films g-CN quantum dot doping for high-performance perovskite solar cells.

Perovskite film-quality is a crucial factor to improve the photovoltaic properties of perovskite solar cells, which is closely related to the morphology of crystallization grain size of the perovskite layer. However, defects and trap sites are inevitably generated on the surface and at the grain boundaries of the perovskite layer. Here, we report a convenient method for preparing dense and uniform perovskite films, employing g-CN quantum dots doped into the perovskite layer by regulating proper proportions.

Effects of the speed on the webbed foot kinematics of mallard ().

In this study, the effect of the speed on the webbed foot locomotion of the mallard was analyzed based on a considerable number of reliable indoor test data. Four adult male mallards were selected for analysis, and the locomotion speed of the mallard was controlled using the treadmill at an accurate and adjustable speed. The locomotion pattern of the webbed foot of the mallard at different speeds was recorded using a high-speed camera.

Enhanced Performance of CsPbIBr Perovskite Solar Cell by Modified Zinc Oxide Nanorods Array with [6,6]-Phenyl C Butyric Acid.

Although Metal oxide ZnO is widely used as electron transport layers in all-inorganic PSCs due to high electron mobility, high transmittance, and simple preparation processing, the surface defects of ZnO suppress the quality of perovskite film and inhibit the solar cells' performance. In this work, [6,6]-Phenyl C butyric acid (PCBA) modified zinc oxide nanorods (ZnO NRs) is employed as electron transport layer in perovskite solar cells. The resulting perovskite film coated on the zinc oxide nanorods has better crystallinity and uniformity, facilitating charge carrier transportation, reducing recombination losses, and ultimately improving the cells' performance.

On the Investigation of Frequency Characteristics of a Novel Inductive Debris Sensor.

Lubricants have the ability to reduce frictions, prevent wear, convey metal debris particles and increase the efficiency of heat transfer; therefore, they have been widely used in mechanical systems. To assess the safety and reliability of the machine under operational conditions, the development of inductive debris sensors for the online monitoring of debris particles in lubricants has received more attention from researchers. To achieve a high-precision, high-efficiency sensor for accurate prediction on the degree of wear, the equivalent circuit model of the sensor coil has been established, and its equations discovering the relationship between the induced voltage and excitation frequency have been derived.

Interface Regulation for Efficient and Stable Perovskite Solar Cells through Potassium Citrate Molecules.

Efficiency and stability are key factors determining the final cost of electricity that perovskite solar cells (PSCs) generate. To date, effective strategy to progress in achieving efficient and stable PSCs is still a difficult problem that researchers continue to explore. This study reports a useful way to improve the quality of SnO film by introducing potassium citrate (PC) into SnO nanoparticles solution.

Perylene Monoimide Phosphorus Salt Interfacial Modified Crystallization for Highly Efficient and Stable Perovskite Solar Cells.

Reducing the interfacial defects of perovskite films is key to improving the performance of perovskite solar cells (PSCs). In this study, two kinds of perylene monoimide (PMI) derivative phosphonium bromide salts were designed and used as a multifunctional interface-modified layer in PSCs. These two molecules are inserted between SnO and perovskite to produce a bidirectional passivation effect.

Effect of electrical impedance-guided PEEP in reducing pulmonary complications after craniotomy: study protocol for a randomized controlled trial.

Objective: The purpose of this study is to explore whether electrical impedance tomography (EIT)-guided individualized positive end-expiratory pressure (PEEP) can reduce the incidence of pulmonary complications within 1 week following a craniotomy compared with a single PEEP (PEEP = 6 cmHO) from dura suturing to extubation.

Methods: A randomized controlled trial will be conducted at the Second Affiliated Hospital of Soochou University. Five hundred forty patients undergoing a craniotomy in the supine position will be randomly allocated into the P6 (PEEP = 6 cmHO) or Pi (individualized PEEP) group.

Identification of hub biomarkers of myocardial infarction by single-cell sequencing, bioinformatics, and machine learning.

Background: Myocardial infarction (MI) is one of the first cardiovascular diseases endangering human health. Inflammatory response plays a significant role in the pathophysiological process of MI. Messenger RNA (mRNA) has been proven to play a key role in cardiovascular diseases.

Pupil Diameter Changes after Anesthesia with Different Doses of Sufentanil under Ultrasound Monitoring.

Objective: This study aims to observe the changes in pupil diameter (PD) after anesthesia with different doses of sufentanil with the ultrasound method and observe whether pupil contraction is correlated with hemodynamic changes and bispectral index (BIS) values.

Methods: A total of 124 patients between the ages of 18-65 with ASA I-II undergoing general anesthesia for surgery were enrolled in the study. According to the sufentanil dose initially injected, they were randomly divided into groups P, S1, S2, and S3, with 31 cases in each group.

Risk factors of postoperative septic cardiomyopathy in perioperative sepsis patients.

Objective: This study aimed to clarify the relevant risk factors of septic cardiomyopathy (SCM) in perioperative sepsis patients.

Methods: This retrospective study evaluated patients who were diagnosed with sepsis during the perioperative period and postoperatively admitted to the intensive care unit (ICU) in the Second Affiliated Hospital of Soochow University, the First Affiliated Hospital of Soochow University, and the Suzhou Municipal Hospital between January 2017 and November 2020. They were divided into two groups as the septic cardiomyopathy group (SCM group) and the non-SCM group (NSCM group).

Near-ideal electromechanical coupling in textured piezoelectric ceramics.

Electromechanical coupling factor, k, of piezoelectric materials determines the conversion efficiency of mechanical to electrical energy or electrical to mechanical energy. Here, we provide an fundamental approach to design piezoelectric materials that provide near-ideal magnitude of k, via exploiting the electrocrystalline anisotropy through fabrication of grain-oriented or textured ceramics. Coupled phase field simulation and experimental investigation on <001> textured Pb(MgNb)O-Pb(Zr,Ti)O ceramics illustrate that k can reach same magnitude as that for a single crystal, far beyond the average value of traditional ceramics.

Improvements in Efficiency and Stability of Perovskite Solar Cells Using a Cesium Chloride Additive.

Perovskite films with few defects play a key role in preparing high-performance perovskite solar cells (PSCs). Here, cesium chloride (CsCl) was introduced as a modulator into a perovskite precursor for manipulating the crystallization of perovskite films. By introducing CsCl, dense homogeneous perovskite films with high crystallinity, preferential orientation, and a pure black perovskite phase were prepared.

Complete Chloroplast Genome Sequence of , Insights into Comparative Chloroplast Genomics, Divergence Time Estimation and Phylogenetic Relationships among Dipsacales.

, ( L., Caprifoliaceae, Dipsacales) are widely distributed in China while mainly occurrs in northeast China. Few reports have been determined on the genus .