Venous access for hematopoietic progenitor cell collection: An international survey by the ASFA HPC donor subcommittee.

Purpose: Hematopoietic Progenitor Cell (HPC) collection by apheresis is performed in patients and donors to obtain HPCs for transplantation. Although studies have shown these procedures to be safe, successful collection cannot be performed without establishment of venous access. This project's objective was to ascertain the current practices of donor vein assessment and central venous catheter (CVC) usage.

Structure-solubility relationships in fluoride-containing phosphate based bioactive glasses.

The dissolution of fluoride-containing bioactive glasses critically affects their biomedical applications. Most commercial fluoride-releasing bioactive glasses have been designed in the soda-lime-silica system. However, their relatively slow chemical dissolution and the adverse effect of fluoride on their bioactivity are stimulating the study of alternative biodegradable materials with higher biodegradability, such as biodegradable phosphate-based bioactive glasses, which can be a good candidate for applications where a fast release of active ions is sought.

Titanium phosphate glass microcarriers induce enhanced osteogenic cell proliferation and human mesenchymal stem cell protein expression.

In this study, we have developed 50- to 100-µm-sized titanium phosphate glass microcarriers (denoted as Ti5) that show enhanced proliferation of human mesenchymal stem cells and MG63 osteosarcoma cells, as well as enhanced human mesenchymal stem cell expression of bone differentiation markers, in comparison with commercially available glass microspheres at all time points. We also demonstrate that these microcarriers provide superior human mesenchymal stem cell proliferation with conventional Dulbecco's Modified Eagle medium than with a specially developed commercial stem cell medium. The microcarrier proliferative capacity is revealed by a 24-fold increase in MG63 cell numbers in spinner flask bioreactor studies performed over a 7-day period, versus only a 6-fold increase in control microspheres under the same conditions; the corresponding values of Ti5 and control microspheres under static culture are 8-fold and 7-fold, respectively.

Biocompatible Mesoporous Nanotubular Structured Surface to Control Cell Behaviors and Deliver Bioactive Molecules.

Biocompatible nanostructured surfaces control the cell behaviors and tissue integration process of medical devices and implants. Here we develop a novel biocompatible nanostructured surface based on mesoporous silica nanotube (MSNT) by means of an electrodeposition. MSNTs, replicated from carbon nanotubes of 25 nm × 1200 nm size, were interfaced in combination with fugitive biopolymers (chitosan or collagen) onto a Ti metallic substrate.

Nanotechnology in dentistry: prevention, diagnosis, and therapy.

Nanotechnology has rapidly expanded into all areas of science; it offers significant alternative ways to solve scientific and medical questions and problems. In dentistry, nanotechnology has been exploited in the development of restorative materials with some significant success. This review discusses nanointerfaces that could compromise the longevity of dental restorations, and how nanotechnolgy has been employed to modify them for providing long-term successful restorations.

Inhibition of osteoclastogenesis through siRNA delivery with tunable mesoporous bioactive nanocarriers.

Unlabelled: Gene silencing through siRNA delivery has shown great promise for treating diseases and repairing damaged tissues, including bone. This report is the first to develop siRNA delivery system in the inhibition of osteoclastic functions which in turn can help turn-over bone mass increase in the diseases like osteoporosis. For this reason, biocompatible and degradable nanocarriers that can effectively load and deliver genetic molecules to target cells and tissues are being actively sought by researchers.

Biological and mechanical properties of an experimental glass-ionomer cement modified by partial replacement of CaO with MgO or ZnO.

Some weaknesses of conventional glass ionomer cement (GIC) as dental materials, for instance the lack of bioactive potential and poor mechanical properties, remain unsolved.Objective The purpose of this study was to investigate the effects of the partial replacement of CaO with MgO or ZnO on the mechanical and biological properties of the experimental glass ionomer cements.Material and Methods Calcium fluoro-alumino-silicate glass was prepared for an experimental glass ionomer cement by melt quenching technique.

Preparation of Self-Activated Fluorescence Mesoporous Silica Hollow Nanoellipsoids for Theranostics.

The newly developed multifunctional (self-activated fluorescent, mesoporous, and biocompatible) hollow mesoporous silica nanoellipsoids (f-hMS) are potentially useful as a delivery system of drugs for therapeutics and imaging purposes. For the synthesis of f-hMS, self-activated fluorescence hydroxyapatite (fHA) was used as a core template. A mesoporous silica shell was obtained by silica formation and subsequent removal of the fHA core, which resulted in a hollow-cored f-hMS.

Core-shell fibrous stem cell carriers incorporating osteogenic nanoparticulate cues for bone tissue engineering.

Moldable hydrogels that incorporate stem cells hold great promise for tissue engineering. They secure the encapsulated cells for required periods while allowing a permeable exchange of nutrients and gas with the surroundings. Core-shell fibrous structured hydrogel system represents these properties relevant to stem cell delivery and defect-adjustable tissue engineering.

Fluorescence-based retention assays reveals sustained release of vascular endothelial growth factor from bone grafts.

The sustained release of growth factors following their implantation in vivo is essential for successful outcomes in bone tissue engineering. In this study, we evaluated the release kinetics and delivery efficacies of vascular endothelial growth factor (VEGF), a potent angiogenic growth factor, incorporated into calcium phosphate bone grafts (BGs). We evaluated the release profile of VEGF from BGs using a novel fluorescence-based retention assay, which revealed that VEGF loaded on BGs can be released in a sustained manner without an initial burst (near zero-order cumulative release) with a controlled release rate of 13.

Magnetic Nanocomposite Scaffold-Induced Stimulation of Migration and Odontogenesis of Human Dental Pulp Cells through Integrin Signaling Pathways.

Magnetism is an intriguing physical cue that can alter the behaviors of a broad range of cells. Nanocomposite scaffolds that exhibit magnetic properties are thus considered useful 3D matrix for culture of cells and their fate control in repair and regeneration processes. Here we produced magnetic nanocomposite scaffolds made of magnetite nanoparticles (MNPs) and polycaprolactone (PCL), and the effects of the scaffolds on the adhesion, growth, migration and odontogenic differentiation of human dental pulp cells (HDPCs) were investigated.

Sol-gel synthesis of quaternary (P2O5)55-(CaO)25-(Na2O)(20-x)-(TiO2) x bioresorbable glasses for bone tissue engineering applications (x = 0, 5, 10, or 15).

In the present study, we report a new and facile sol-gel synthesis of phosphate-based glasses with the general formula of (P2O5)55-(CaO)25-(Na2O)(20-x)-(TiO2) x , where x = 0, 5, 10 or 15, for bone tissue engineering applications. The sol-gel synthesis method allows greater control over glass morphology at relatively low processing temperature (200 °C) in comparison with phosphate-based melt-derived glasses (~1000 °C). The glasses were analyzed using several characterization techniques, including x-ray diffraction (XRD), (31)P magic angle spinning nuclear magnetic resonance ((31)P MAS-NMR), Fourier transform infrared (FTIR) spectroscopy and energy-dispersive x-ray (EDX) spectroscopy, which confirmed the amorphous and glassy nature of the prepared samples.

Engineering of Self-Assembled Fibronectin Matrix Protein and Its Effects on Mesenchymal Stem Cells.

Fibronectin (FN) contributes to cell adhesion, proliferation, and differentiation in various cell types. To enhance the activity of fibronectin at the sites of focal adhesion, we engineered a novel recombinant fibronectin (FNIII10) fragment connected to the peptide amphiphile sequence (PA), LLLLLLCCCGGDS. In this study, the effects of FNIII10-PA on rat mesenchymal stem cells (rMSCs) were compared with those of FNIII10.

Report of the ASFA apheresis registry study on Wilson's disease.

Purpose: Wilson's disease is a rare autosomal recessive genetic disorder that results in accumulation of copper in the liver, brain, cornea and kidney. Therapeutic plasma exchange (TPE) has been used to remove copper and provide a bridge to liver transplantation. We report here the collective experiences through the ASFA apheresis registry on Wilson's disease.

Smart multifunctional drug delivery towards anticancer therapy harmonized in mesoporous nanoparticles.

Nanomedicine seeks to apply nanoscale materials for the therapy and diagnosis of diseased and damaged tissues. Recent advances in nanotechnology have made a major contribution to the development of multifunctional nanomaterials, which represents a paradigm shift from single purpose to multipurpose materials. Multifunctional nanomaterials have been proposed to enable simultaneous target imaging and on-demand delivery of therapeutic agents only to the specific site.

Potential of inherent RGD containing silk fibroin-poly (Є-caprolactone) nanofibrous matrix for bone tissue engineering.

The current study deals with the fabrication and characterization of blended nanofibrous scaffolds of tropical tasar silk fibroin of Antheraea mylitta and poly (Є-caprolactone) to act as an ideal scaffold for bone regeneration. The use of poly (Є-caprolactone) in osteogenesis is well-recognized. At the same time, the osteoconductive nature of the non-mulberry tasar fibroin is also established due to its internal integrin binding peptide RGD (Arg-Gly-Asp) sequences, which enhance cellular interaction and proliferation.

Systematic review on herb-induced liver injury in Korea.

Herbal drugs are generally regarded as safe due to their extensive clinical use especially in East Asian countries. However, the potential toxicity of herbal drugs has become an important medical issue recently, resulting in numerous reports of drug-induced liver injury (DILI). Here, we performed a systematic review of herbal medicines with the potential to cause hepatotoxicity in Korea.

Feasibility of silica-hybridized collagen hydrogels as three-dimensional cell matrices for hard tissue engineering.

Exploiting hydrogels for the cultivation of stem cells, aiming to provide them with physico-chemical cues suitable for osteogenesis, is a critical demand for bone engineering. Here, we developed hybrid compositions of collagen and silica into hydrogels via a simple sol-gel process. The physico-chemical and mechanical properties, degradation behavior, and bone-bioactivity were characterized in-depth; furthermore, the in vitro mesenchymal stem cell growth and osteogenic differentiation behaviors within the 3D hybrid gel matrices were communicated for the first time.

Novel therapeutic core-shell hydrogel scaffolds with sequential delivery of cobalt and bone morphogenetic protein-2 for synergistic bone regeneration.

Unlabelled: Enabling early angiogenesis is a crucial issue in the success of bone tissue engineering. Designing scaffolds with therapeutic potential to stimulate angiogenesis as well as osteogenesis is thus considered a promising strategy. Here, we propose a novel scaffold designed to deliver angiogenic and osteogenic factors in a sequential manner to synergize the bone regeneration event.

Influence of ZnO/MgO substitution on sintering, crystallisation, and bio-activity of alkali-free glass-ceramics.

The present study reports on the influence of partial replacement of MgO by ZnO on the structure, crystallisation behaviour and bioactivity of alkali-free bioactive glass-ceramics (GCs). A series of glass compositions (mol%): 36.07 CaO-(19.

Strontium- and calcium-containing, titanium-stabilised phosphate-based glasses with prolonged degradation for orthopaedic tissue engineering.

Strontium- and calcium-releasing, titanium-stabilised phosphate-based glasses with a controlled degradation rate are currently under development for orthopaedic tissue engineering applications. Ca and/or Sr were incorporated at varying concentrations in quaternary phosphate-based glasses, in order to promote osteoinduction. Ti was incorporated at a fixed concentration in order to prolong degradation.

Tumor-Targeting Co-Delivery of Drug and Gene from Temperature-Triggered Micelles.

Co-delivery strategy using multifunctional nanocarriers is an attractive option for the synergistic and enhanced effects in cancer treatment, but one system integrating multiple functions for controlled release at the target is still challenging. Herein, this study shows the synthesis and characterization of our stimulus-responsive co-delivery system for the controlled release into tumors, which is composed of polyethylenimine (PEI)-linked Pluronic F127 (PF127) and folic acid (FA), called PF127-PEI-FA. PF127-PEI-FA system facilitated drug loading and gene complex formation, and showed controlled release behaviors in response to hitting temperature to hyperthermia.

Multifunctional and stable bone mimic proteinaceous matrix for bone tissue engineering.

Biomaterial surface design with biomimetic proteins holds great promise for successful regeneration of tissues including bone. Here we report a novel proteinaceous hybrid matrix mimicking bone extracellular matrix that has multifunctional capacity to promote stem cell adhesion and osteogenesis with excellent stability. Osteocalcin-fibronectin fusion protein holding collagen binding domain was networked with fibrillar collagen, featuring bone extracellular matrix mimic, to provide multifunctional and structurally-stable biomatrices.

Controlling oxygen release from hollow microparticles for prolonged cell survival under hypoxic environment.

The survival of cells in the 3D scaffold until the ingrowth of blood vessels is one of the most important challenges in tissue engineering for producing a clinically relevant volume of tissue. In this study, perfluorooctane emulsion (oxygen carrier)-loaded hollow microparticles (PFO-HPs) were prepared as a scaffolding system which can allow timely release of oxygen to cells adhered on the HPs to prevent cell necrosis in a hypoxic environment (inherently created in tissue engineered 3D constructs) until new blood vessels are formed in the 3D cell construct, and thus may produce appropriate tissues/organs with a clinically relevant volume. In the in vitro cell culture and the in vivo animal study, it was observed that the cells initially seeded on the PFO-HPs remained alive for approximately 10 days in a hypoxic environment (in vitro), and the cells were also found throughout the implanted whole matrix without a necrotic center until the infiltration of blood vessels (at 14 days after implantation; in vivo), probably due to the sufficient release of oxygen from the PFO-HPs for an adequate time period.