The role of temperature in the photoluminescence quantum yield (PLQY) of AgS-based nanocrystals.

Highly emissive AgS nanocrystals (NCs) passivated with a gradated shell incorporating Se and Zn were synthesized in air, and the temperature dependence of their photoluminescence quantum yield (PLQY) was quantified in both organic and aqueous media at ∼1200 nm. The relevance of this parameter, measured at physiological temperatures, is highlighted for applications that rely on the near infrared (NIR) photoluminescence of NCs, such as deep NIR imaging or luminescence nanothermometry. Hyperspectral NIR imaging shows that AgS-based NCs with a PLQY in organic media of about 10% are inefficient for imaging at 40 °C through 20 mm thick tissue with low laser irradiation power densities.

Demonstration of tritium adsorption on graphene.

In this work, we report on studies of graphene exposed to tritium gas in a controlled environment. The single layer graphene on a SiO/Si substrate was exposed to 400 mbar of T, for a total time of ∼55 h. The resistivity of the graphene sample was measured during tritium exposure using the van der Pauw method.

Versatile Confocal Raman Imaging Microscope Built from Off-the-Shelf Opto-Mechanical Components.

Confocal Raman microscopic (CRM) imaging has evolved to become a key tool for spatially resolved, compositional analysis and imaging, down to the μm-scale, and nowadays one may choose between numerous commercial instruments. That notwithstanding, situations may arise which exclude the use of a commercial instrument, e.g.

New Constraint on the Local Relic Neutrino Background Overdensity with the First KATRIN Data Runs.

We report on the direct search for cosmic relic neutrinos using data acquired during the first two science campaigns of the KATRIN experiment in 2019. Beta-decay electrons from a high-purity molecular tritium gas source are analyzed by a high-resolution MAC-E filter around the end point at 18.57 keV.

Accurate Reference Gas Mixtures Containing Tritiated Molecules: Their Production and Raman-Based Analysis.

Highly accurate, quantitative analyses of mixtures of hydrogen isotopologues-both the stable species, H, D, and HD, and the radioactive species, T, HT, and DT-are of great importance in fields as diverse as deuterium-tritium fusion, neutrino mass measurements using tritium β-decay, or for photonuclear experiments in which hydrogen-deuterium targets are used. In this publication we describe a production, handling, and analysis facility capable of fabricating well-defined gas samples, which may contain any of the stable and radioactive hydrogen isotopologues, with sub-percent accuracy for the relative species concentrations. The production is based on precise manometric gas mixing of H, D, and T.

Bound on 3+1 Active-Sterile Neutrino Mixing from the First Four-Week Science Run of KATRIN.

We report on the light sterile neutrino search from the first four-week science run of the KATRIN experiment in 2019. Beta-decay electrons from a high-purity gaseous molecular tritium source are analyzed by a high-resolution MAC-E filter down to 40 eV below the endpoint at 18.57 keV.

Improved Upper Limit on the Neutrino Mass from a Direct Kinematic Method by KATRIN.

We report on the neutrino mass measurement result from the first four-week science run of the Karlsruhe Tritium Neutrino experiment KATRIN in spring 2019. Beta-decay electrons from a high-purity gaseous molecular tritium source are energy analyzed by a high-resolution MAC-E filter. A fit of the integrated electron spectrum over a narrow interval around the kinematic end point at 18.

Improving the Detection Limit in a Capillary Raman System for In Situ Gas Analysis by Means of Fluorescence Reduction.

Raman spectroscopy for low-pressure or trace gas analysis is rather challenging, in particular in process control applications requiring trace detection and real-time response; in general, enhancement techniques are required. One possible enhancement approach which enjoys increasing popularity makes use of an internally-reflective capillary as the gas cell. However, in the majority of cases, such capillary systems were often limited in their achievable sensitivity by a significant fluorescence background, which is generated as a consequence of interactions between the laser light and optical glass components in the setup.

Ellipsometry with polarisation analysis at cryogenic temperatures inside a vacuum chamber.

In this paper we describe a new variant of null ellipsometry to determine thicknesses and optical properties of thin films on a substrate at cryogenic temperatures. In the PCSA arrangement of ellipsometry the polarizer and the compensator are placed before the substrate and the analyzer after it. Usually, in the null ellipsometry the polarizer and the analyzer are rotated to find the searched minimum in intensity.

Automated quantitative spectroscopic analysis combining background subtraction, cosmic ray removal, and peak fitting.

An integrated concept for post-acquisition spectrum analysis was developed for in-line (real-time) and off-line applications that preserves absolute spectral quantification; after the initializing parameter setup, only minimal user intervention is required. This spectral evaluation suite is composed of a sequence of tasks specifically addressing cosmic ray removal, background subtraction, and peak analysis and fitting, together with the treatment of two-dimensional charge-coupled device array data. One may use any of the individual steps on their own, or may exclude steps from the chain if so desired.

Vibrational excitation of adsorbed molecules by photoelectrons of very low energy: acrylonitrile on Cu(100).

In this study, we report on a powerful method of primary photoelectron scattering by adsorbed species. Specifically, threshold-energy (E(kin,max) < 0.5 eV) two-photon photoelectrons (2PPE) are used to probe acrylonitrile (ACN) molecules chemisorbed onto a Cu(100) substrate, held at room temperature.

Antimatter plasmas in a multipole trap for antihydrogen.

We have demonstrated storage of plasmas of the charged constituents of the antihydrogen atom, antiprotons and positrons, in a Penning trap surrounded by a minimum-B magnetic trap designed for holding neutral antiatoms. The neutral trap comprises a superconducting octupole and two superconducting, solenoidal mirror coils. We have measured the storage lifetimes of antiproton and positron plasmas in the combined Penning-neutral trap, and compared these to lifetimes without the neutral trap fields.

Search for laser-induced formation of antihydrogen atoms.

Antihydrogen can be synthesized by mixing antiprotons and positrons in a Penning trap environment. Here an experiment to stimulate the formation of antihydrogen in the n = 11 quantum state by the introduction of light from a CO2 continuous wave laser is described. An overall upper limit of 0.

Single-pollen analysis by laser-induced breakdown spectroscopy and Raman microscopy.

The application of laser-induced breakdown spectroscopy to the analysis of single biological microparticles (bioaerosols) is described, exemplified here for a range of pollens. Spectra were recorded by exposure of the pollen to a single laser pulse from a Nd:YAG laser (lambda = 1064 nm, Ep approximately 30 mJ). The intensities of the single-pulse laser-induced breakdown spectra fluctuated dramatically, but an internal signal calibration procedure was applied that referenced elemental line intensities to the carbon matrix of the sample (represented by molecular bands of CN and C2).

Application of frustrated total internal reflection devices to analytical laser spectroscopy.

Novel implementations of single-fiber laser-induced breakdown spectroscopy and laser-induced fluorescence spectroscopy systems that gated light switches based on frustrated total internal reflection are described. The switching devices are largely wavelength independent, with full temporal and spatial separation of laser and fluorescence light. Wavelength-independent beam separation or beam combination schemes can be implemented for coaxial optical setups, e.

Laser-induced breakdown spectroscopy: a tool for real-time, in vitro and in vivo identification of carious teeth.

BACKGROUND: Laser Induced Breakdown Spectroscopy (LIBS) can be used to measure trace element concentrations in solids, liquids and gases, with spatial resolution and absolute quantifaction being feasible, down to parts-per-million concentration levels. Some applications of LIBS do not necessarily require exact, quantitative measurements. These include applications in dentistry, which are of a more "identify-and-sort" nature - e.

Clinical application of laser-induced breakdown spectroscopy to the analysis of teeth and dental materials.

Objectives: The luminous plasma generated during laser ablation of dental tissue and dental materials has been analyzed to determine qualitative and quantitative elemental composition.

Background Data: The use of pulsed lasers for controlled material ablation now is frequently suggested as an alternative to mechanical drilling for the removal of caries and in tooth modification. Spectral analysis of the ablated plasma can be exploited to monitor precisely the laser drilling process in vivo and in real time.

A comparison of the techniques of secondary ion mass spectrometry and resonance ionization mass spectrometry for the analysis of potentially toxic element accumulation in neural tissue.

A comparison is made of the techniques of secondary ion mass spectrometry (SIMS) and resonance ionization mass spectrometry (RIMS) for the detection of the neuro-toxic element aluminium in cortical tissue. Experiments were performed using a reflectron-type time-of-flight mass spectrometer (TOFMS) in conjunction with an Ar+ source for target sputtering and a pulsed tuneable dye laser system for resonance ionization. It is shown how isobaric interference of species such as CNH and C2H3 in the case of aluminium greatly affect the quantitative accuracy and the detection limit of aluminium in biological samples when analysed using SIMS.

Remote in situ analytical spectroscopy and its applications in the nuclear industry.

An experimental system based on Laser Induced Breakdown Spectroscopy (LIBS) has been used to analyze various ferrous samples. A fibre optic system has been used to transmit the incident laser pulse which produces the plasma plume at the surface of the analyte and to transmit back to a spectrometer the optical radiation emitted by the plasma. The measuring system may therefore be placed remote from the analyte which may be situated in a hostile environment such as an operating nuclear reactor.