Liquid Crystal Elastomer Artificial Tendrils with Asymmetric Core-Sheath Structure Showing Evolutionary Biomimetic Locomotion.

The sophisticated and complex haptonastic movements in response to environmental-stimuli of living organisms have always fascinated scientists. However, how to fundamentally mimic the sophisticated hierarchical architectures of living organisms to provide the artificial counterparts with similar or even beyond-natural functions based on the underlying mechanism remains a major scientific challenge. Here,  liquid crystal elastomer (LCE) artificial tendrils showing evolutionary biomimetic locomotion are developed following the structure-function principle that is used in nature to grow climbing plants.

Selective Laser Sintering of Polydimethylsiloxane Composites.

Conductive silicone elastomer carbon nanotubes (CNTs) composites possess potential applications in a variety of fields, including electronic skin, wearable electronics, and human motion detection. Based on a novel self-made covalent adaptable network (CANs) of polydimethylsiloxane (PDMS) containg dynamic steric-hindrance pyrazole urea bond (PDMS-CANs), CNTs wrapped PDMS-CANs (CNTs@PDMS-CANs) powders were prepared by a liquid phase adsorption and deposition, and were successfully used for selective laser sintering (SLS) three-dimensional printing. SLS-printed PDMS-CANs/CNTs nanocomposites possess high electrical conductivity and low percolation threshold as SLS is one kind of quasi-static processing, which leads to the formation of conductive segregated CNTs network by using the PDMS powders with special CNTs wrapped structure.

Robust and recyclable graphene/chitosan composite aerogel microspheres for adsorption of oil pollutants from water.

Despite recent progress in graphene-based aerogels, challenges such as low mechanical strength and adsorption efficiency are still remaining. Here the reduced graphene oxide (rGO)/chitosan (CS) composite aerogel microspheres (rGCAMs) with center-diverging microchannel structures were developed by electrospraying and freeze-drying method. The optimized rGCAMs exhibit a high Young's modulus of 197 kPa and can support ~75,000 times its own weight, due to the cross-linking of CS by glutaraldehyde.

High Silica Content Graphene/Natural Rubber Composites Prepared by a Wet Compounding and Latex Mixing Process.

The reduced graphene oxide (rGO) modified natural rubber composite (NR) filled with high contents of silica was prepared by a wet compounding and latex mixing process using a novel interface modifier cystamine dihydrochloride (CDHC) with coagulation ability. CDHC acts as a coagulation agent through electrostatic interaction with rGO, SiO, and latex rubber particles during the latex-based preparation process, while in the obtained silica/graphene/natural rubber composites, CDHC acts as an interface modifier. Compared with the composites prepared by the conventional mechanical mixing method, the dispersion of both rGO and SiO in the composites made by a wet compounding and latex mixing process is improved.

On the Synergistic Effect of Multi-Walled Carbon Nanotubes and Graphene Nanoplatelets to Enhance the Functional Properties of SLS 3D-Printed Elastomeric Structures.

Elastomer-based porous structures realized by selective laser sintering (SLS) are emerging as a new class of attractive multifunctional materials. Herein, a thermoplastic polyurethane (TPU) powder for SLS was modified by 1 wt.% multi-walled carbon nanotube (MWCNTs) or a mixture of MWCNTs and graphene (GE) nanoparticles (70/30 /) in order to investigate on both the synergistic effect provided by the two conductive nanostructured carbonaceous fillers and the correlation between formulation, morphology, and final properties of SLS printed porous structures.

Novel Poly(vinyl alcohol)/Chitosan/Modified Graphene Oxide Biocomposite for Wound Dressing Application.

Rapid absorption of wound exudate and prevention of wound infection are prerequisites for wound dressing to accelerate wound healing. In this study, a novel kind of promising wound dressing is developed by incorporating polyhexamethylene guanidine (PHMG)-modified graphene oxide (mGO) into the poly(vinyl alcohol)/chitosan (PVA/CS) matrix, conferring the dressing the required mechanical properties, higher water vapor transmission rate (WVTR), less swelling time, improved antibacterial activity, and more cell proliferation compared to the PVA/CS film crosslinked by genipin. In vivo experiments indicate that the PVA/CS/mGO composite film can accelerate wound healing via enhancement of the re-epithelialization.

Constructing 3D Graphene Network in Rubber Nanocomposite via Liquid-Phase Redispersion and Self-Assembly.

A three-dimensional graphene (GE) segregated network structure is of significance for improving the conductivity of composites. However, constructing such a GE network structure in composites still remains a challenge. Here, we demonstrate a facile process, that is, liquid-phase redispersion and self-assembly (LRS) to prepare polymer nanocomposites with graphene segregated networks.

4D Printing of a Liquid Crystal Elastomer with a Controllable Orientation Gradient.

Liquid crystal elastomers (LCEs), a class of soft materials capable of a large and reversible change in the shape under the trigger of external stimuli, can be fabricated into diverse architectures with complicated deformation modes through four-dimensional (4D) printing. However, the printable LCE ink is only in the form of monomeric precursors and the deformation mode is limited to contraction/extension deformation. Herein, we report a novel approach to break through these limitations.

Pt Nanoparticle-Loaded Graphene Aerogel Microspheres with Excellent Methanol Electro-Oxidation Performance.

Platinum-decorated graphene aerogel microspheres were fabricated through a combined electrospraying, freeze-casting, and solvothermal process. Platinum nanoparticles with a narrow size distribution are evenly anchored on the graphene aerogel microspheres without agglomeration benefitting from the distinct center-diverging microchannel structure of the graphene aerogel microspheres, which results in the as-prepared catalysts presenting excellent electrocatalytic performance including high electrocatalytic activity and high poison tolerance toward methanol electro-oxidation, showing great potential for direct methanol fuel cell anode catalysts. In particular, the platinum-decorated graphene aerogel microspheres exhibit an extremely high mass activity of 1098.

Dual water-healable zwitterionic polymer coatings for anti-biofouling surfaces.

Herein, we show for the first time drop-casting zwitterionic polymer colloidal particles onto different surfaces to obtain zwitterionic coatings with highly protein-repelling properties and dual self-healing capabilities. Upon nano/micro mechanical scratches, the coatings self-heal in a NaCl solution which is accompanied by the recovery of the anti-biofouling characteristics. Also under severe macro damage conditions, water will induce the zwitterionic groups buried inside the particles to transfer to the coating surface, and as such regenerate the surface-wetting properties and repair the anti-biofouling properties.

HIFU induced particles redistribution in polymer matrix via synchrotron radiation X-ray microtomography.

High-intensity Focused Ultrasound (HIFU) was used to stimulate the embedded copper sulfate (CuSO) particles to release from the crosslinked poly (methyl methacrylate-co-butyl acrylate) copolymer solid matrix. In order to better understand the ultrasound release mechanism for drug/polymer delivery systems, the synchrotron radiation X-ray computed microtomography (SR-CT) was used to non-destructively investigate the structure of drug/polymer delivery systems after different HIFU treatment time. For the first time, we clearly demonstrate that ultrasonic waves can overcome the constraints of the polymer chain and drive the filler to move from the strong region to the weak region in the solid polymer matrix, thus resulting in a change in distribution of the filler in solid polymers.

Polydimethylsiloxane incorporated with reduced graphene oxide (rGO) sheets for wound dressing application: Preparation and characterization.

Toward fabricating a novel multifunctional wound dressing material, we incorporated a series of contents of reduced graphene oxide (rGO) sheets into polydimethylsiloxane (PDMS) matrix to prepare the rGO-PDMS composite membrane and be used for wound dressing. The pore structure, dispersion of rGO, physical properties, water vapor transmission rate (WVTR), cytotoxicity and antibacterial activity were studied. Finally, the effect of the rGO-PDMS composite membrane on wound healing was investigated on a murine full-thickness skin wound model.

Liquid-Crystalline Dynamic Networks Doped with Gold Nanorods Showing Enhanced Photocontrol of Actuation.

A near-infrared-light (NIR)- and UV-light-responsive polymer nanocomposite is synthesized by doping polymer-grafted gold nanorods into azobenzene liquid-crystalline dynamic networks (AuNR-ALCNs). The effects of the two different photoresponsive mechanisms, i.e.

A Facile Strategy for Self-Healing Polyurethanes Containing Multiple Metal-Ligand Bonds.

A metal-ligand crosslinked internal self-healing polyurethane is developed using low-cost and commercially available compounds. The mechanical, photoluminescent, and self-healing properties can be governed by incorporating multiple metal-ligand crosslinks with weak and strong coordination bonds and varying the metal ion. In-situ attenuated total reflectance Fourier transform infrared spectroscopy reveals that the metal-ligand bond is cleaved during the damage process while metal ion is still coordinated with the ligand by stronger metal-pyridyl interaction.

Polydopamine Particles Reinforced Poly(vinyl alcohol) Hydrogel with NIR Light Triggered Shape Memory and Self-Healing Capability.

This study focuses on developing a facile approach to prepare biocompatible poly(vinyl alcohol) (PVA) composite hydrogels containing polydopamine particles (PDAPs) with ultrafast near-infrared (NIR) light-triggered shape memory and self-healing capability. The PVA-PDAPs composite hydrogels with excellent mechanical properties can be achieved after freezing/thawing treatment, and the formation of physically cross-linked networks from the hydrogen bonding (H-bonding) between PVA and PDAPs. Due to the excellent photothermal effect of polydopamine, the composited hydrogel can achieve rapid shape recovery and efficient self-healing properties under NIR light exposure in a short time.

High-intensity focused ultrasound selective annealing induced patterned and gradient crystallization behavior of polymer.

High-intensity focused ultrasound (HIFU) was developed as a spatial selective annealing method to control the crystallization behavior and performance of polymer using amorphous polyethylene terephthalate (PET) as an example for demonstration. The spatial crystallization and morphological details of HIFU induced crystallization areas at the lamellar level and spherulite scale were studied by Micro-Focus hard X-ray diffraction, small angle X-ray scattering and optical microscopy. According to the distribution of crystallinity of PET, we can indirectly detect the history of thermal distribution of the ultrasonic focal point, which is hard to obtain by other methods.