Improving Interfacial and Compressive Properties of Polyimide Fiber by Constructing Inorganic Layers on Fiber Surface.

The compressive performance of organic fiber has always been a key problem, limiting its development. In this paper, silicon oxide, alumina, and titanium oxide particles were separately deposited on the surface of high-strength and high-modulus polyimide (PI) fibers to form a structural supporting shell by using a magnetron sputtering method. The theoretical thickness was calculated by thermogravimetric analysis in good agreement with the actual thickness determined from scanning electron microscopy.

Retina-inspired organic neuromorphic vision sensor with polarity modulation for decoding light information.

The neuromorphic vision sensor (NeuVS), which is based on organic field-effect transistors (OFETs), uses polar functional groups (PFGs) in polymer dielectrics as interfacial units to control charge carriers. However, the mechanism of modulating charge transport on basis of PFGs in devices is unclear. Here, the carboxyl group is introduced into polymer dielectrics in this study, and it can induce the charge transfer process at the semiconductor/dielectric interfaces for effective carrier transport, giving rise to the best device mobility up to 20 cm V s at a low operating voltage of -1 V.

Thermostable and nonflammable polyimide/zirconia compound separator for lithium-ion batteries with superior electrochemical and safe properties.

Separators are applied to segregate cathode and anode, and provide ion transport channels in lithium-ion batteries (LIBs). Nevertheless, present commercial polyolefin separators represent high thermal shrinkage and inferior electrolyte wettability, seriously limiting wider development of LIBs. In this work, we prepared zirconia (ZrO) nanolayer encapsulated polyimide (PI) nanofiber compound separator through in-situ polar adsorption and hydrolysis strategy.

Long non-coding RNA TUG1 promotes osteosarcoma cell proliferation and invasion through inhibition of microRNA-212-3p expression.

[This retracts the article DOI: 10.3892/etm.2018.

High-Temperature-Induced Shape Memory Copolyimide.

A series of polyimide (PI) films with a high-temperature-induced shape memory effect and tunable properties were prepared via the facile random copolymerization of 4,4'-oxydianiline (ODA) with 4,4'-(hexafluoroisopropyl)diphthalic anhydride (6FDA) and 4,4'-oxydiphthalic anhydride (ODPA). The trigger temperature can be controlled from 294 to 326 °C by adjusting the ratio of monomers. The effects of monomer rigidity on the chain mobility, physical properties, and shape memory performance of as-prepared copolyimide were systematically investigated.

Enhanced Impact Properties of Hybrid Composites Reinforced by Carbon Fiber and Polyimide Fiber.

A series of hybrid fiber-reinforced composites were prepared with polyimide fiber and carbon fiber as the reinforcement and epoxy resin as the matrix. The influence of stacking sequence on the Charpy impact and flexural properties of the composites as well as the failure modes were studied. The results showed that hybrid fiber-reinforced composites yielded nearly 50% increment in Charpy impact strength compared with the ones reinforced by carbon fiber.

Effect of a "Zn Bridge" on the Consecutively Tunable Retention Characteristics of Volatile Random Access Memory Materials.

Polyimide memory materials with a donor-acceptor structure based on a charge-transfer mechanism exhibit great potential for next-generation information storage technology due to their outstanding high-temperature resistance and good dimensional and chemical stability. Precisely controlling memory performance by limited chemical decoration is one of core challenges in this field. Most reported work mainly focuses on designing novel and elaborate electron donors or acceptors for the expected memory behavior of polyimides; this takes a lot of time and is not always efficacious.

Zinc Ion Triggered Controllable Binary/Ternary Memory Conversion Behaviors in Polyimides Containing Pendant Porphyrin Group.

Compared with typical binary polymeric memory materials, functional polymers with ternary memory performance possess significant potential to achieve ultra-high-density data storage. The reported ternary memory polymers are normally driven by dual-mechanism. However, the involved thermodynamically unstable mechanisms (field-induced conformation change or conductive filament formation/fracture) may result in the poor reliability of memory devices under high-temperature working atmosphere.

The design of a multifunctional separator regulating the lithium ion flux for advanced lithium-ion batteries.

Herein, we design a controllable approach for preparing multifunctional polybenzimidazole porous membranes with superior fire-resistance, excellent thermo-stability, and high wettability. Specifically, the recyclable imidazole is firstly utilized as the eco-friendly template for micropores formation, which is an interesting finding and has tremendous potential for low-cost industrial production. The unique backbone structure of the as-prepared polybenzimidazole porous membrane endows the separator with superb thermal dimensional stability at 300 °C.

A Janus nanofiber-based separator for trapping polysulfides and facilitating ion-transport in lithium-sulfur batteries.

Endowing separators with the polysulfide-blocking function is urgently needed for high-performance lithium-sulfur (Li-S) batteries. Thus far, most of the reported research has focused on modifying conventional polyolefin separators but with poor thermal stability and low ionic conductivity. To address these issues, herein we report a Janus separator based on a thermally stable polymeric nanofabric designed with abilities to trap polysulfides and facilitate the transport of Li+ simultaneously.

In Situ Armoring: A Robust, High-Wettability, and Fire-Resistant Hybrid Separator for Advanced and Safe Batteries.

Development of nonflammable separators with excellent properties is in urgent need by next-generation advanced and safe energy storage devices. However, it has been extremely challenging to simultaneously achieve fire resistance, high mechanical strength, good thermomechanical stability, and low ion-transport resistance for polymeric separators. Herein, to address all these needs, we report an in situ formed silica@silica-imbedded polyimide (in situ SiO@(PI/SiO)) nanofabric as a new high-performance inorganic-organic hybrid separator.

Robust polyimide nanofibrous membrane with porous-layer-coated morphology by in situ self-bonding and micro-crosslinking for lithium-ion battery separator.

Herein, we demonstrate a strategy to improve the tensile strength, thermal safety issues, and electrochemical performance of an as-synthesized polyimide separator. By spraying the solution of a specific chemical constituent on both sides of a poly(amic acid) non-woven membrane followed by thermal treatment, a novel polyimide nanofibrous membrane with porous-layer-coated morphology was successfully fabricated by in situ self-bonding and micro-crosslinking technique. The self-bonding and micro-crosslinking techniques improve the tensile strength of the nanofiber membranes from 5 MPa to 28 MPa by forming a crosslinked network structure, thereby reducing the risk of nanofiber disassembly during long-term operation.

Long non-coding RNA TUG1 promotes osteosarcoma cell proliferation and invasion through inhibition of microRNA-212-3p expression.

Taurine upregulated gene 1 (TUG1), a long non-coding RNA (lncRNA), has recently been suggested to be associated with the development of osteosarcoma (OS), but the underlying molecular mechanism still remains largely unclear. In the present study, it was revealed that TUG1 was significantly upregulated whereas miR-212-3p was significantly downregulated in OS tissues and cell lines, when compared with adjacent non-tumor tissues and normal osteoblasts cell lines, respectively. An inverse association between the TUG1 and miR-212-3p expression was also observed in OS tissues.

Copolymer dielectrics with balanced chain-packing density and surface polarity for high-performance flexible organic electronics.

The ever-increasing demand for flexible electronics calls for the development of low-voltage and high-mobility organic thin-film transistors (OTFTs) that can be integrated into emerging display and labeling technologies. Polymer dielectrics with comprehensive and balanced dielectric properties (i.e.

Downregulation of TACC3 inhibits tumor growth and migration in osteosarcoma cells through regulation of the NF-κB signaling pathway.

TACC3, a member of the transforming acidic coiled-coil protein (TACC) family, is a multifunctional protein that is involved in various biological functions, including proliferation and differentiation of tumor cells, cancer progression and metastasis. The aims of the present study were to examine whether TACC3 expression is associated with the proliferation and migration of osteosarcoma (OS) cells and to investigate the potential underlying molecular mechanisms of TACC3 in OS. First, the levels of mRNA and protein expression in OS cell lines by reverse transcription-quantitative polymerase chain reaction and western blotting, respectively were examined.

Berberine alleviates oxidative stress in rats with osteoporosis through receptor activator of NF-kB/receptor activator of NF-kB ligand/osteoprotegerin (RANK/RANKL/OPG) pathway.

Previous studies suggested that oxidative stress is related to the onset and development of osteoporosis. Moreover, it was demonstrated that berberine has a protective effect against oxidative stress-induced injuries. In this study, we aimed to investigate the effect and mechanism of action of berberine on rats with induced osteoporosis.

Synthesis of silver nanocubes with controlled size using water-soluble poly(amic acid) salt as the intermediate via a novel ion-exchange self-assembly technique.

Here, we report for the first time on the successful fabrication of monodispersed silver nanocubes with regular shape and controlled size in the solid phase via a novel ion-exchange self-assembly technique by using water-soluble poly(amic acid) salt as the intermediate and silver nitrate as the metal precursor. By simply altering the annealing times at high temperature, the size of the silver nanocubes could be finely tuned in the range of 90-160 nm in the present case. Further attempts with different metal salts show that the present method is also feasible for other metal species and might be universal.

Interfacial growth of controllable morphology of silver patterns on plastic substrates.

Controllable growth of newly born silver nanoparticles to fractal, cauliflower-like, microscale disks and continuous silver layers with high conductivity and reflectivity on plastic substrates has been developed via solid-liquid interfacial reduction and growing of ion-doped polymeric films. Such approaches involve polyimide (PI) films as substrates, its corresponding silver-ion-doped precursors as solid oxidants, and facile immersion of ion-doped polymeric films in aqueous reducing solution. The solution reducing process belongs to liquid-solid interfacial reduction processes, during which silver ions doped in polymeric matrix transformed to newly born silver nanoparticles which further aggregated and migrated along the liquid-solid interface to form dendrite, cauliflower-like and lamella disk-like architecture and/or severely compact continuous silver nanolayers with highly reflective and conductive properties.

Incorporation of silver nanoparticles into the bulk of the electrospun ultrafine polyimide nanofibers via a direct ion exchange self-metallization process.

This paper reports our works on the preparation of the silver-nanoparticle-incorporated ultrafine polyimide (PI) ultrafine fibers via a direct ion exchange self-metallization technique using silver ammonia complex cation ([Ag(NH(3))(2)](+)) as the silver precursor and pyromellitic dianhydride (PMDA)/4,4'-oxidianiline (4,4'-ODA) polyimide as the matrix. The polyimide precursor, poly(amic acid) (PAA), was synthesized and then electrospun into ultrafine fibers. By thermally treating the silver(I)-doped PAA ultrafine fibers, where the silver(I) ions were loaded through the ion exchange reactions of the carboxylic acid groups of the PAA macromolecules with the [Ag(NH(3))(2)](+) cations in an aqueous solution, ultrafine polyimide fibers embedded with silver nanoparticles with diameters less than 20 nm were successfully fabricated.

Critical role of connexin 43 in secondary expansion of traumatic spinal cord injury.

Spinal cord injury (SCI) is often complicated by secondary injury as a result of the innate inflammatory response to tissue trauma and swelling. Previous studies have shown that excessive ATP release from peritraumatic regions contributes to the inflammatory response to SCI by activation of low-affinity P2X7 receptors. Because connexin hemichannels constitute an important route for astrocytic ATP release, we here evaluated the impact on post-traumatic ATP release of deletion of connexins (Cx30/Cx43) in astrocytes.

Dynamic random access memory effect and memory device derived from a functional polyimide containing electron donor-acceptor pairs in the main chain.

A functional polyimide, hexafluoroisopropyl bis(phthalic dianhydride)/3,6-diaminocarbazole (6FDA/DAC), in which DAC serves as electron donor and 6FDA as electron acceptor, has been synthesized in our present work. Electrical characterization results on the sandwiched polyimide memory device (ITO/Thin polyimide Layer/Au) indicate that the polyimide possesses electrical bistability and the device exhibits two accessible conductivity states, which can be reversibly switched from the low-conductivity (OFF) state to the high-conductivity (ON) state with an ON/OFF current ratio of about 10(4). Different from the widely reported write-once-read-many-times (WORM) effects, the device with the 6FDA/DAC polyimide as the active layer shows dynamic random access memory (DRAM) behavior.

Systemic administration of an antagonist of the ATP-sensitive receptor P2X7 improves recovery after spinal cord injury.

Traumatic spinal cord injury is characterized by an immediate, irreversible loss of tissue at the lesion site, as well as a secondary expansion of tissue damage over time. Although secondary injury should, in principle, be preventable, no effective treatment options currently exist for patients with acute spinal cord injury (SCI). Excessive release of ATP by the traumatized tissue, followed by activation of high-affinity P2X7 receptors, has previously been implicated in secondary injury, but no clinically relevant strategy by which to antagonize P2X7 receptors has yet, to the best of our knowledge, been reported.

Neonatal chimerization with human glial progenitor cells can both remyelinate and rescue the otherwise lethally hypomyelinated shiverer mouse.

Congenitally hypomyelinated shiverer mice fail to generate compact myelin and die by 18-21 weeks of age. Using multifocal anterior and posterior fossa delivery of sorted fetal human glial progenitor cells into neonatal shiverer x rag2(-/-) mice, we achieved whole neuraxis myelination of the engrafted hosts, which in a significant fraction of cases rescued this otherwise lethal phenotype. The transplanted mice exhibited greatly prolonged survival with progressive resolution of their neurological deficits.