Significance: Light-sheet fluorescence microscopy is widely used for high-speed, high-contrast, volumetric imaging. Application of this technique to brain imaging in non-transparent organisms has been limited by the geometric constraints of conventional light-sheet microscopes, which require orthogonal fluorescence excitation and collection objectives. We have recently demonstrated implantable photonic neural probes that emit addressable light sheets at depth in brain tissue, miniaturizing the excitation optics.
View Article and Find Full Text PDFAdvances in chip-scale photonic-electronic integration are enabling a new generation of foundry-manufacturable implantable silicon neural probes incorporating nanophotonic waveguides and microelectrodes for optogenetic stimulation and electrophysiological recording in neuroscience research. Further extending neural probe functionalities with integrated microfluidics is a direct approach to achieve neurochemical injection and sampling capabilities. In this work, we use two-photon polymerization 3D printing to integrate microfluidic channels onto photonic neural probes, which include silicon nitride nanophotonic waveguides and grating emitters.
View Article and Find Full Text PDFIn this Letter, we report a bridge-connected three-electrode germanium-on-silicon (Ge-on-Si) avalanche photodiode (APD) array compatible with the complementary metal-oxide semiconductor (CMOS) process. In addition to the two electrodes on the Si substrate, a third electrode is designed for Ge. A single three-electrode APD was tested and analyzed.
View Article and Find Full Text PDFLaser beam scanning is central to many applications, including displays, microscopy, three-dimensional mapping, and quantum information. Reducing the scanners to microchip form factors has spurred the development of very-large-scale photonic integrated circuits of optical phased arrays and focal plane switched arrays. An outstanding challenge remains to simultaneously achieve a compact footprint, broad wavelength operation, and low power consumption.
View Article and Find Full Text PDFConventional thermo-optic devices-which can be broadly categorized to that with and without a thermal isolation trench-typically come with a tradeoff between thermal tuning efficiency and tuning speed. Here, we propose a method that allows us to directly define the tradeoff using a specially designed thermo-optic phase shifter with an interleaved isolation trench. With the design, the tuning efficiency and speed can be precisely tailored simply by controlling the duty ratio (suspended length over total heater length) of the suspended design.
View Article and Find Full Text PDFWe demonstrate power-efficient, thermo-optic, silicon nitride waveguide phase shifters for blue, green, and yellow wavelengths. The phase shifters operated with low power consumption due to a suspended structure and multi-pass waveguide design. The devices were fabricated on 200-mm silicon wafers using deep ultraviolet lithography as part of an active visible-light integrated photonics platform.
View Article and Find Full Text PDFSilicon based optoelectronic integrated optical phased array is attractive owing to large-dense integration, large scanning range and CMOS compatibility. In this paper, we design and fabricate a SiN-on-SOI two-dimensional optical phased array chip. We demonstrate a two-dimensional scanning range of 96°×14.
View Article and Find Full Text PDFThe optical power handling of an OPA scanning beam determines its targeted detection distance. So far, a limited number of investigations have been conducted on the restriction of the beam power. To the best of our knowledge, we for the first time in this paper explore the ability of the silicon photonics based OPA circuit for the high power application.
View Article and Find Full Text PDFWe present passive, visible light silicon nitride waveguides fabricated on ≈ 100 µm thick 200 mm silicon wafers using deep ultraviolet lithography. The best-case propagation losses of single-mode waveguides were ≤ 2.8 dB/cm and ≤ 1.
View Article and Find Full Text PDFAluminum nitride on insulator (AlNOI) photonics platform has great potential for mid-infrared applications thanks to the large transparency window, piezoelectric property, and second-order nonlinearity of AlN. However, the deployment of AlNOI platform might be hindered by the high propagation loss. We perform thermal annealing study and demonstrate significant loss improvement in the mid-infrared AlNOI photonics platform.
View Article and Find Full Text PDFWe report on the design, fabrication and testing of three types of coupling structures for hybrid chalcogenide glass GeSbS-Silicon (GeSbS-Si) photonic integrated circuit platforms. The first type is a fully etched GeSbS grating coupler defined directly in the GeSbS film. Coupling losses of 5.
View Article and Find Full Text PDFWe report an aluminum nitride on insulator platform for mid-infrared (MIR) photonics applications beyond 3 μm. Propagation loss and bending loss are studied, while functional devices such as directional couplers, multimode interferometers, and add/drop filters are demonstrated with high performance. The complementary metal-oxide-semiconductor-compatible aluminum nitride offers advantages ranging from a large transparency window, high thermal and chemical resistance, to piezoelectric tunability and three-dimensional integration capability.
View Article and Find Full Text PDFA grating coupler is an essential building block for compact and flexible photonics integration. In order to meet the increasing demand of mid-infrared (MIR) integrated photonics for sensitive chemical/gas sensing, we report a silicon-on-insulator (SOI) based MIR subwavelength grating coupler (SWGC) operating in the 3.7 μm wavelength range.
View Article and Find Full Text PDFIn this paper, we report a compact wavelength-flattened directional coupler (WFDC) based chemical sensor featuring an incorporated subwavelength grating (SWG) structure for the mid-infrared (MIR). By incorporating a SWG structure into directional coupler (DC), the dispersion in DC can be engineered to allow broadband operation which is advantageous to extract spectroscopic information for MIR sensing analysis. Meanwhile, the Bragg reflection introduced by the SWG structure produces a sharp trough at the Bragg wavelength.
View Article and Find Full Text PDFWe experimentally investigate an optical link relying on silicon photonics transmitter and receiver components as well as a single section semiconductor mode-locked laser as a light source and a semiconductor optical amplifier for signal amplification. A transmitter based on a silicon photonics resonant ring modulator, an external single section mode-locked laser and an external semiconductor optical amplifier operated together with a standard receiver reliably supports 14 Gbps on-off keying signaling with a signal quality factor better than 7 for 8 consecutive comb lines, as well as 25 Gbps signaling with a signal quality factor better than 7 for one isolated comb line, both without forward error correction. Resonant ring modulators and Germanium waveguide photodetectors are further hybridly integrated with chip scale driver and receiver electronics, and their co-operability tested.
View Article and Find Full Text PDFOptical solitons-stable waves balancing delicately between nonlinearities and dispersive effects-have advanced the field of ultrafast optics and dynamics, with contributions spanning from supercontinuum generation to soliton fission, optical event horizons, Hawking radiation and optical rogue waves, among others. Here, we investigate picojoule soliton dynamics in silicon slow-light, photonic-bandgap waveguides under the influence of Drude-modeled, free-carrier-induced nonlinear effects. Using real-time and single-shot amplified dispersive Fourier transform spectroscopy simultaneously with high-fidelity cross-correlation frequency resolved optical gating at femtojoule sensitivity and femtosecond resolution, we examine the soliton stability limits, the soliton dynamics including free-carrier quartic slow-light scaling and acceleration, and the Drude electron-hole plasma-induced perturbations in the Cherenkov radiation and modulation instability.
View Article and Find Full Text PDFWe experimentally realize a compact wideband polarization splitter and rotator (PSR) with CMOS compatibility. The fabricated PSR is then tested by utilizing a fabrication-tolerant TE-pass on-chip polarizer we propose to practically solve the issue of accurately aligning the polarizations in fiber and modes on chip. Both of these polarization handling devices take the advantage of bend structure that confines TE mode better than TM mode.
View Article and Find Full Text PDFWe propose a compact highly-efficient CMOS-compatible polarization splitter and rotator (PSR) with a wide bandwidth covering the whole O-band. It benefits from the different confinement capability of TE and TM modes in bend structure. This bend structure helps shorten the PSR and maintain high efficiency, achieving the bending, polarization splitting, rotating of light beam at the same time.
View Article and Find Full Text PDFAn AlN electro-optic phase shifter with a parallel plate capacitor structure is fabricated on Si using the back-end complementary metal-oxide-semiconductor technology, which is feasible for multilayer photonics integration. The modulation efficiency (V⋅L product) measured from the fabricated waveguide-ring resonators and Mach-Zehnder Interferometer (MZI) modulators near the 1550-nm wavelength is ∼240 V⋅cm for the transverse electric (TE) mode and ∼320 V⋅cm for the transverse magnetic (TM) mode, from which the Pockels coefficient of the deposited AlN is deduced to be ∼1.0 pm/V for both TE and TM modes.
View Article and Find Full Text PDFBiosens Bioelectron
November 2016
Silicon photonics integrated circuits (Si-PIC) with well-established active and passive building elements are progressing towards large-scale commercialization in optical communications and high speed optical interconnects applications. However, current Si-PICs do not have memory capabilities, in particular, the non-volatile memory functionality for energy efficient data storage. Here, we propose an electrically programmable, multi-level non-volatile photonics memory cell (PMC) fabricated by standard complementary-metal-oxide-semiconductor (CMOS) compatible processes.
View Article and Find Full Text PDFThe first demonstration of an optofluidic metamaterial is reported where resonant properties of every individual metamolecule can be continuously tuned at will using a microfluidic system. This is called a random-access reconfigurable metamaterial, which is used to provide the first demonstration of a tunable flat lens with wavefront-reshaping capabilities.
View Article and Find Full Text PDFIn this paper, we demonstrate a compact electrically pumped distributed-feedback hybrid III-V/silicon laser with laterally coupled Bragg grating for the first time to the best of our knowledge. The hybrid laser structure consists of AlGaInAs/InP multi-quantum-well gain layers on top of a laterally corrugated silicon waveguide patterned on a silicon on insulator (SOI) substrate. A pair of surface couplers is integrated at the two ends of the silicon waveguide for the optical coupling and characterization of the ouput light.
View Article and Find Full Text PDFMicroRNAs have been identified as promising biomarkers for human diseases. The development of a point-of-care (POC) test for the disease-associated miRNAs would be especially beneficial, since miRNAs are unexpectedly well preserved in various human specimens, including urine. Here, we present the Mach-Zehnder interferometer-miRNA detection system capable of detecting multiple miRNAs in clinical urine samples rapidly and simultaneously in a label-free and real-time manner.
View Article and Find Full Text PDF