Silica Nanoparticles Tailored with a Molecularly Imprinted Copolymer Layer as a Highly Selective Biorecognition Element.

Molecularly imprinted silica nanoparticles (SP-MIP) are synthesized for the real-time optical detection of low-molecular-weight compounds. Azo-initiator-modified silica beads are functionalized through reversible addition-fragmentation chain transfer (RAFT) polymerization, which leads to efficient control of the grafted layer. The copolymerization of methacrylic acid (MAA) and ethylene glycol dimethacrylate (EDMA) on azo initiator-coated silica particles (≈100 nm) using chain transfer agent (2-phenylprop-2-yl-dithiobenzoate) is carried out in the presence of a target analyte molecule (l-Boc-phenylalanine anilide, l-BFA).

Understanding the evolution of lithium dendrites at LiAlLaZrO grain boundaries via operando microscopy techniques.

The growth of lithium dendrites in inorganic solid electrolytes is an essential drawback that hinders the development of reliable all-solid-state lithium metal batteries. Generally, ex situ post mortem measurements of battery components show the presence of lithium dendrites at the grain boundaries of the solid electrolyte. However, the role of grain boundaries in the nucleation and dendritic growth of metallic lithium is not yet fully understood.

Continuous-Flow Production of Perfluorocarbon-Loaded Polymeric Nanoparticles: From the Bench to Clinic.

Perfluorocarbon-loaded nanoparticles are powerful theranostic agents, which are used in the therapy of cancer and stroke and as imaging agents for ultrasound and F magnetic resonance imaging (MRI). Scaling up the production of perfluorocarbon-loaded nanoparticles is essential for clinical translation. However, it represents a major challenge as perfluorocarbons are hydrophobic and lipophobic.

Autonomous Ultrafast Self-Healing Hydrogels by pH-Responsive Functional Nanofiber Gelators as Cell Matrices.

The synthesis of hybrid hydrogels by pH-controlled structural transition with exceptional rheological properties as cellular matrix is reported. "Depsi" peptide sequences are grafted onto a polypeptide backbone that undergo a pH-induced intramolecular O-N-acyl migration at physiological conditions affording peptide nanofibers (PNFs) as supramolecular gelators. The polypeptide-PNF hydrogels are mechanically remarkably robust.

Transformation of Amorphous Polyphosphate Nanoparticles into Coacervate Complexes: An Approach for the Encapsulation of Mesenchymal Stem Cells.

Inorganic polyphosphate [polyP] has proven to be a promising physiological biopolymer for potential use in regenerative medicine because of its morphogenetic activity and function as an extracellular energy-donating system. Amorphous Ca -polyP nanoparticles [Ca-polyP-NPs] are characterized by a high zeta potential with -34 mV (at pH 7.4).

Photon energy upconverting nanopaper: a bioinspired oxygen protection strategy.

The development of solid materials which are able to upconvert optical radiation into photons of higher energy is attractive for many applications such as photocatalytic cells and photovoltaic devices. However, to fully exploit triplet-triplet annihilation photon energy upconversion (TTA-UC), oxygen protection is imperative because molecular oxygen is an ultimate quencher of the photon upconversion process. So far, reported solid TTA-UC materials have focused mainly on elastomeric matrices with low barrier properties because the TTA-UC efficiency generally drops significantly in glassy and semicrystalline matrices.

Polarization fatigue of organic ferroelectric capacitors.

The polarization of the ferroelectric polymer P(VDF-TrFE) decreases upon prolonged cycling. Understanding of this fatigue behavior is of great technological importance for the implementation of P(VDF-TrFE) in random-access memories. However, the origin of fatigue is still ambiguous.

Cellulose nanofiber/nanocrystal reinforced capsules: a fast and facile approach toward assembly of liquid-core capsules with high mechanical stability.

Liquid-core capsules of high mechanical stability open up for many solid state-like applications where functionality depending on liquid mobility is vital. Herein, a novel concept for fast and facile improvement of the mechanical properties of walls of liquid-core capsules is reported. By imitating nature's own way of enhancing the mechanical properties in liquid-core capsules, the parenchyma plant cells found in fruits and vegetables, a blend of short cellulose nanofibers (<1 μm, NFC) and nanocrystals (CNC) was exploited in the creation of the capsule walls.

Enzyme-accelerated and structure-guided crystallization of calcium carbonate: role of the carbonic anhydrase in the homologous system.

The calcareous spicules from sponges, e.g. from Sycon raphanus, are composed of almost pure calcium carbonate.

Enzymatic degradation of poly(L-lactide) nanoparticles followed by the release of octenidine and their bactericidal effects.

Unlabelled: The enzyme-triggered release of the antimicrobial agent octenidine out of poly(l-lactide)-based nanoparticles (PLLA-NPs) and their in vitro antibacterial activities in the presence of gram-positive and gram-negative bacteria are presented. The formation of the nanoparticles was achieved using a combination of the solvent evaporation and the miniemulsion approach. For the stabilization of the polymeric nanoparticles, non-ionic polymers (polyvinylalcohol [PVA], hydroxyethyl starch [HES], human serum albumin [HSA]) were successfully used for enzymatic degradation; ionic surfactants such as sodium dodecyl sulfate and cetyltrimethylammonium chloride inhibited the enzymatic degradation.

Well-defined nanofibers with tunable morphology from spherical colloidal building blocks.

From particles to fibers: Nanofibers with different morphologies and periodicities can be fabricated by supraparticular assembly of magnetic spherical nanoparticles. A linear sintering process is used to merge the assembled colloids together. The structure of the obtained fibers is controlled by the process parameters and the morphology of the spherical colloidal building blocks.

Hierarchically structured metal oxide/silica nanofibers by colloid electrospinning.

We present herein a new concept for the preparation of nanofibrous metal oxides based on the simultaneous electrospinning of metal oxide precursors and silica nanoparticles. Precursor fibers are prepared by electrospinning silica nanoparticles (20 nm in diameter) dispersed in an aqueous solution of poly(acrylic acid) and metal salts. Upon calcination in air, the poly(acrylic acid) matrix is removed, the silica nanoparticles are cemented, and nanocrystalline metal oxide particles of 4-14 nm are nucleated at the surface of the silica nanoparticles.

Sponge biosilica formation involves syneresis following polycondensation in vivo.

Syneresis is a process observed during the maturation/aging of silica gels obtained by sol-gel synthesis that results in shrinkage and expulsion of water due to a rearrangement and increase in the number of bridging siloxane bonds. Here we describe how the process of biosilica deposition during spicule ("biosilica" skeleton of the siliceous sponges) formation involves a phase of syneresis that occurs after the enzyme-mediated polycondensation reaction. Primmorphs from the demosponge Suberites domuncula were used to study syneresis and the inhibition of this mechanism.

Tailored Albumin-based Copolymers for Receptor-Mediated Delivery of Perylenediimide Guest Molecules.

The synthesis of a novel and multifunctional copolymer based on a human serum albumin backbone bearing several folic acid as well as PEO groups was presented. In solution, this side-chain copolymer adopts a globular architecture and about five molecules of the water-insoluble chromophore PDI were successfully incorporated into these micelles for receptor-mediated cell uptake investigations. A significant uptake of these bioconjugates via receptor-mediated endocytosis was detected for cells expressing folic acid receptors in the cell membrane.

Inorganic polymeric phosphate/polyphosphate as an inducer of alkaline phosphatase and a modulator of intracellular Ca2+ level in osteoblasts (SaOS-2 cells) in vitro.

Inorganic polymeric phosphate is a physiological polymer that accumulates in bone cells. In the present study osteoblast-like SaOS-2 cells were exposed to this polymer, complexed in a 2:1 stoichiometric ratio with Ca(2+), polyP (Ca(2+) salt). At a concentration of 100 μM, polyP (Ca(2+) salt) caused a strong increase in the activity of the alkaline phosphatase and also an induction of the steady-state expression of the gene encoding this enzyme.

Osteogenic potential of biosilica on human osteoblast-like (SaOS-2) cells.

Biosilica is a natural polymer, synthesized by the poriferan enzyme silicatein from monomeric silicate substrates. Biosilica stimulates mineralizing activity and gene expression of SaOS-2 cells. To study its effect on the formation of hydroxyapatite (HA), SaOS-2 cells were grown on different silicatein/biosilica-modified substrates (bone slices, Ca-P-coated coverslips, glass coverslips).

Hybrid polymer-silicon proton conducting membranes via a pore-filling surface-initiated polymerization approach.

An alternative approach for the creation of proton conducting platforms is presented. The methodology is based on the so-called "pore-filling concept", which relies on the filling of porous matrices with polyelectrolytes to obtain proton conducting platforms with high dimensional stability. Polymer-silicon composite membranes, with well-defined polyelectrolyte microdomains oriented normal to the plane of the membrane, were prepared using photoelectrochemically etched silicon as a microstructured scaffold.

Parameters influencing the templated growth of colloidal crystals on chemically patterned surfaces.

The influence of various experimental parameters on the vertical deposition and structure formation of colloidal crystals on chemically patterned surfaces, with hydrophilic and hydrophobic areas, was investigated. The pattern dimensions range from about 4 to 400 microm, which is much larger than the individual particle size (255 nm), to control the microscopic crystal shape rather than influencing the crystal lattice geometry (as achieved in colloidal epitaxy). The deposition resolution and selectivity were tested by varying the particle concentration in the suspension, the substrate withdrawing speed, pattern size and orientation, and wetting contrast between the hydrophilic and hydrophobic regions.

Colloidal assemblies on patterned silane layers.

The site-selective assembly of colloidal polymer particles onto laterally patterned silane layers was studied as a model system for the object assembly process at mesoscale dimensions. The structured silane monolayers on silicon oxide substrates were fabricated by a combination of liquid- and gas-phase deposition of different trialkoxysilanes with a photolithographic patterning technique. By using this method various types of surface functionalizations such as regions with amino functions next to areas of the bare silica surface or positively charged regions of a quaternary ammonium silane surrounded by a hydrophobic octadecylsilane film could be obtained.