Prospects for the use of nanozyme-based electrochemical and colorimetric sensors for antibiotic detection.

Rapid and accurate monitoring of residual antibiotic concentrations is of great importance in environmental monitoring. Therefore, research is active to develop new methods for analyzing antibiotics. Biosensors, including those based on nanozymes, are very successful for antibiotic analysis.

Bacterial Communities and Their Role in Bacterial Infections.

Since infections associated with microbial communities threaten human health, research is increasingly focusing on the development of biofilms and strategies to combat them. Bacterial communities may include bacteria of one or several species. Therefore, examining all the microbes and identifying individual community bacteria responsible for the infectious process is important.

Phage Antibodies for Detection of Diagnostically Important Antigens.

The need for rapid and cheap synthesis of large numbers of chemical compounds has contributed to the emergence of combinatorial chemistry (simultaneous synthesis of different compounds, in contrast to traditional synthesis, in which each substance is produced individually). Combinatorial library methods were initially applied only to peptides and oligonucleotides. By now, the scope of these libraries has expanded considerably to include proteins, synthetic oligomers, small molecules, and oligosaccharides.

Sensor system for analysis of biofilm sensitivity to ampicillin.

The resistance of biofilms to antibiotics is a key factor that makes bacterial infections unsusceptible to antimicrobial therapy. The results of classical tests of cell sensitivity to antibiotics cannot be used to predict therapeutic success in infections associated with biofilm formation. We describe a simple and rapid method for the real-time evaluation of bacterial biofilm sensitivity to antibiotics, with Pseudomonas putida and ampicillin as examples.

Optical Sensors for Bacterial Detection.

Analytical devices for bacterial detection are an integral part of modern laboratory medicine, as they permit the early diagnosis of diseases and their timely treatment. Therefore, special attention is directed to the development of and improvements in monitoring and diagnostic methods, including biosensor-based ones. A promising direction in the development of bacterial detection methods is optical sensor systems based on colorimetric and fluorescence techniques, the surface plasmon resonance, and the measurement of orientational effects.

Antimicrobial Resistance and Current Methods for its Detection.

Infection diagnosis and antibiotic sensitivity testing are important aspects of clinical microbiology that are in dire need of improvement owing to the inadequate current standards in the early detection of bacterial response to antibiotics. The increasing antimicrobial resistance is a serious global threat to human health. Current resistance-detecting methods, using the phenotypic antibiotic sensitivity test, which measures bacterial growth as affected by antibiotics, have long analysis times.

Electroacoustic Biosensor Systems for Evaluating Antibiotic Action on Microbial Cells.

Antibiotics are widely used to treat infectious diseases. This leads to the presence of antibiotics and their metabolic products in the ecosystem, especially in aquatic environments. In many countries, the growth of pathogen resistance to antibiotics is considered a threat to national security.

Antibody Phage Display Technology for Sensor-Based Virus Detection: Current Status and Future Prospects.

Viruses are widespread in the environment, and many of them are major pathogens of serious plant, animal, and human diseases. The risk of pathogenicity, together with the capacity for constant mutation, emphasizes the need for measures to rapidly detect viruses. The need for highly sensitive bioanalytical methods to diagnose and monitor socially significant viral diseases has increased in the past few years.

Use of cells in quercetin detection.

The possibility of detection and determination of flavonoids by using microbial cells was shown for the first time using the quercetin - Sp245 model system. The activity of the flavonoids quercetin, rutin and naringenin toward Sp245 was evaluated. It was found that when the quercetin concentration ranged from 50 to 100 μM, the number of bacterial cells decreased.

Microwave resonator-based sensor system for specific antibody detection.

An antibody-detecting sensor is described that is based on a microwave electrodynamic resonator. A polystyrene film with immobilized bacteria deposited on a lithium niobate plate was placed at one end of the resonator and was used as the sensing element. The second end was electrically shorted.

Features of the Formation of Sensitive Films Based on Mycelium of Higher Fungi for Surface and Plate Acoustic Waves Gas Sensors.

A comparative analysis of the responses of two types of acoustic waves (surface SAW and plate APW) with close frequencies and the same type of waves (SAW) with different frequencies toward various liquid vapors (water, acetone, ethanol) was carried out in this paper. Two types of films based on mycelium of higher fungus (Curtis) P. Karst () prepared by various methods were used as sensitive coatings.

Recombinant antibodies by phage display for bioanalytical applications.

Antibody phage display, aimed at preparing antibodies to defined antigens, is a useful replacement for hybridoma technology. The phage system replaces all work stages that follow animal immunization with simple procedures for manipulating DNA and bacteria. It enables the time needed to generate stable antibody-producing clones to be shortened considerably, making the process noticeably cheaper.

Whole-cell electric sensor for determination of sodium dodecyl sulfate.

Linear alkyl sulfates are a major class of surfactants that have large-scale industrial application and thus wide environmental release. These organic pollutants threaten aquatic environments and other environmental compartments. We show the promise of the use of a whole-cell electric sensor in the analysis of low or residual concentrations of sodium dodecyl sulfate (SDS) in aqueous solutions.

Microfluidic bioanalytical system for biofilm formation indication.

The formation of biofilms is a key factor that researchers must consider when they work with bacterial cultures. We describe a new microfluidic bioanalytical sensory system for indicating biofilm formation. The method is demonstrated with Pseudomonas bacteria as an example and is based on the real-time recording of cell-polarizability changes caused by an alternating electric field.

Microbial Acoustical Analyzer for Antibiotic Indication.

In this study, a compact acoustic analyzer for express analysis of antibiotics based on a piezoelectric resonator with a lateral electric field and combined with a computer was developed. The possibility of determining chloramphenicol in aqueous solutions in the concentration range of 0.5-15 μg/mL was shown.

Synthesis of silymarin-selenium nanoparticle conjugate and examination of its biological activity in vitro.

Silymarin (Sil) was conjugated to selenium nanoparticles (SeNPs) to increase Sil bioavailability. The conjugates were monodisperse; the average diameter of the native SeNPs was ~ 20-50 ± 1.5 nm, whereas that of the conjugates was 30-50 ± 0.

Sensor System Based on a Piezoelectric Resonator with a Lateral Electric Field for Virus Diagnostics.

A sensor system based on a piezoelectric resonator with a lateral electric field in the frequency range 6-7 MHz of the electric field for virus detection is described. Through use of the transmissible virus causing gastroenteritis in pigs and specific antibodies, the possibility of detecting the virus in suspension in real time was determined. It was found that the frequency dependence of the real and imaginary parts of the electrical impedance of such a resonator loaded with a virus suspension changes significantly after the addition of specific antibodies to the suspension.

Microbial acoustic sensor test-system based on a piezoelectric resonator with a lateral electric field for kanamycin detection in liquid.

A microbial test-system for real-time determination of low/residual concentrations of kanamycin in a liquid without the need for special labels is presented. The main element of the system was a piezoelectric resonator excited by a lateral electric field based on an X-cut lithium niobate plate 0.5 mm thick with two rectangular electrodes on one side.

Use of an optical sensor to directly monitor the metabolic activity of growing bacteria.

The metabolic activity of growing bacteria was directly monitored by using an electro-optical (EO) sensor. The sensor enables examination of bacteria in batch and continuous cultures. As examples, we report studies with Еscherichia coli, a bacterium with an aerobic type of metabolism, and Lactobacillus plantarum, a bacterium with an anaerobic type of metabolism.

Acoustical Slot Mode Sensor for the Rapid Coronaviruses Detection.

A method for the rapid detection of coronaviruses is presented on the example of the transmissible gastroenteritis virus (TGEV) directly in aqueous solutions with different conductivity. An acoustic sensor based on a slot wave in an acoustic delay line was used for the research. The addition of anti-TGEV antibodies (Abs) diluted in an aqueous solution led to a change in the depth and frequency of resonant peaks on the frequency dependence of the insertion loss of the sensor.

Bacteria-based electro-optical platform for ampicillin detection in aquatic solutions.

We have shown for the first time that it is possible to use a bacteria-based sensory system consisting of the bacterium Pseudomonas putida TSh-18 and an electro-optical sensor to detect ampicillin in the concentration range 0.5-600 μg/mL. Changes in the anisotropy of cell polarizability were detected at 900 and 2100 kHz; these represented the state of the cytoplasm and of the cell membrane, respectively.

Accumulation and cellular toxicity of engineered metallic nanoparticle in freshwater microalgae: Current status and future challenges.

Metal nanoparticles (MNPs) are employed in a variety of medical and non-medical applications. Over the past two decades, there has been substantial research on the impact of metallic nanoparticles on algae and cyanobacteria, which are at the base of aquatic food webs. In this review, the current status of our understanding of mechanisms of uptake and toxicity of MNPs and metal ions released from MNPs after dissolution in the surrounding environment were discussed.

Synthesis of Silymarin-Gold Nanoparticle Conjugate and Analysis of its Liver-Protecting Activity.

Background: The liver disease problem prompts investigators to search for new methods of liver treatment.

Introduction: Silymarin (Sil) protects the liver by reducing the concentration of free radicals and the extent of damage to the cell membranes. A particularly interesting method to increase the bioavailability of Sil is to use synthesized gold nanoparticles (AuNPs) as reagents.

Sensor Based on PZT Ceramic Resonator with Lateral Electric Field for Immunodetectionof Bacteria in the Conducting Aquatic Environment.

A biological sensor for detection and identification of bacterial cells, including a resonator with a lateral electric field based on PZT ceramics was experimentally investigated. For bacterial immunodetection the frequency dependencies of the electric impedance of the sensor with a suspension of microbial cells were measured before and after adding the specific antibodies. It was found that the addition of specific antibodies to a suspension of microbial cells led to a significant change in these frequency dependencies due to the increase in the conductivity of suspension.

Prospects for the Use of Gold Nanoparticles to Increase the Sensitivity of an Acoustic Sensor in the Detection of Microbial Cells.

The interaction of microbial cells with antibody-gold nanoparticle conjugates in conductive suspensions was experimentally studied by using an acoustic slot-mode sensor. The sensor consisted of a piezoelectric plate with a propagating acoustic wave and a liquid container located above this plate with a given gap. An analysis of the measured parameters of the sensor revealed that the specific interaction of bacterial cells with the conjugates led to a stronger change in the sensor output signal than the specific interaction of bacterial cells with antibodies.