Zwitterionic codeine-derived methacrylate monoliths for enantioselective capillary electrochromatography of chiral acids and chiral bases.

Thiol-ene click reaction of N-acetyl-L-cysteine methyl ester to codeine, followed by reaction with allyl isocyanate and hydrolysis to the corresponding zwitterionic chiral selector and its subsequent bonding to the surface of a methacrylate monolith provided a new chiral capillary column for enantiomer separation of chiral acids and chiral bases. First, the epoxy groups of a poly(glycidyl methacrylate-co-ethylene dimethacrylate) monolith were converted into amine residues, followed by reaction with allylglycidyl ether. In this way, a spacer arm was bonded to the surface before coating and cross-linking poly(3-mercaptopropyl methylsiloxane) (PMPMS) via radical addition (thiol-ene click reaction) to the surface.

Application of Organic Monolithic Materials to Enantioseparation in Capillary Separation Techniques.

This review article is primarily focused on the state-of-the-art of enantioseparations on organic monolithic materials. The article gives an overview of the chiral stationary phases and its application in capillary electrochromatography (CEC), and capillary- and nano-liquid chromatography (cLC and nLC). Since thousands of publications have been emerged from 2000's and citing all these papers would extend the scope of this review; then, recent developments from last 10 years (2006 to 2016) will be mentioned.

Determination of the four major surfactant classes in cleaning products by reversed-phase liquid chromatography using serially connected UV and evaporative light-scattering detection.

A method for the simultaneous determination of the most frequently used surfactant families -linear alkyl benzenesulphonates (LAS), alkyl ether sulphates (AES), fatty alcohol ethoxylates (FAE) and oleins (soaps, fatty acid salts) - in cleaning products, has been developed. The common reversed phase octyl (C8), pentafluorophenyl and biphenyl columns were not capable of separating the anionic LAS and AES classes; however, since only LAS absorbs in the UV, these two classes were independently quantified using a C8 column and serially connected UV and ELSD detection. The best compromise to resolve the four surfactant classes and the oligomers within the classes was achieved with a C8 column and an ACN/water gradient.

Thermal desorption gas chromatography with mass spectrometry study of outgassing from polymethacrylimide foam (Rohacell®).

Polymethacrylimide foams are used as light structural materials in outer-space devices; however, the foam closed cells contain volatile compounds that are outgassed even at low temperatures. These compounds ignite as plasmas under outer-space radiation and the intense radio-frequency fields used in communications. Since plasmas may cause spacecraft fatal events, the conditions in which they are ignited should be investigated.

Hybrid methacrylate monolithic columns containing magnetic nanoparticles for capillary electrochromatography.

Vinylized iron oxide magnetic nanoparticles (VMNPs) were incorporated into polymethacrylate monolithic columns to develop novel stationary phases with enhanced separation performance. The VMNPs were dispersed in a polymerization mixture containing gycidyl methacrylate and ethylene glycol dimethacrylate as monomers, cyclohexanol and 1-dodecanol as porogens and azobisisobutyronitrile as initiator. The stability of the VMNPs in the polymerization mixture was investigated at several VMNP contents.

Evaluation of 2,3-epoxypropyl groups and functionalization yield in glycidyl methacrylate monoliths using gas chromatography.

Poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) is most frequently used as parent monolith to obtain stationary phases with a variety of surface chemistries for liquid chromatography and capillary electrochromatography. Functionalization is performed by opening the accessible 2,3-epoxypropyl groups of the monolith with a suitable reagent. The number of 2,3-epoxypropyl groups which are accessible before and after the functionalization reaction, and the grafting yield, are important parameters, required both to optimize functionalization and to interpret the chromatographic performance of functionalized monoliths.

Sensitive determination of parabens in human urine and serum using methacrylate monoliths and reversed-phase capillary liquid chromatography-mass spectrometry.

A method for the determination of parabens in human urine and serum by capillary liquid chromatography (cLC) with UV-Vis and mass spectrometry (MS) detection using methacrylate ester-based monolithic columns has been developed. The influence of composition of polymerization mixture was studied. The optimum monolith was obtained with butyl methacrylate monomer at 60/40% (wt/wt) butyl methacrylate/ethylene dimethacrylate ratio and 50wt% porogens (composed of 36wt% of 1,4-butanediol, 54wt% 1-propanol and 10wt% water).

Polymethacrylate monoliths with immobilized poly-3-mercaptopropyl methylsiloxane film for high-coverage surface functionalization by thiol-ene click reaction.

In this work, new polythiol-functionalized macroporous monolithic polymethacrylate-polysiloxane composite materials are presented which can be useful substrates for highly efficient immobilization of (chiral) catalysts, chromatographic ligands, and other functional moieties by thiol-ene click reaction. Poly(glycidyl methacrylate-co-ethylene dimethacrylate) (poly(GMA-co-EDMA)) monoliths were coated with a poly-3-mercaptopropyl methylsiloxane (PMPMS) film and subsequently the polymer was covalently immobilized by formation of crosslinks via nucleophilic substitution reaction with pendent 2,3-epoxypropyl groups on the monolith surface. This monolith, though, showed similar levels of surface coverage as a reference monolith obtained by opening of the epoxide groups with sodium hydrogen sulfide.

UV-polymerized butyl methacrylate monoliths with embedded carboxylic single-walled carbon nanotubes for CEC applications.

The preparation of polymeric monoliths with embedded carboxy-modified single-walled carbon nanotubes (c-SWNTs) and their use for capillary electrochromatography (CEC) is described. Carbon nanotube composites were obtained by preparing a polymerization mixture in the presence of increasing c-SWNT concentrations, followed by UV initiation. The novel stationary phases were studied by optical microscopy, scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Raman spectroscopy.

Chemical analysis and antioxidant activity of the essential oils of three Piperaceae species growing in the central region of Cuba.

The present study describes the phytochemical profile and antioxidant activity of the essential oils of three Piperaceae species collected in the central region of Cuba. The essential oils of Piper aduncum, P. auritum and P.

Synchronized gradient elution in capillary liquid chromatography.

The synchronization of injection valve operation and gradient elution in capillary liquid chromatography (cHPLC) is studied. Focus is placed on the cHPLC systems which rely on the splitting of a primary flow to provide the much smaller secondary flow required at the injection device and analytical column. Owing to the tiny secondary flow rates, synchronization is necessary to achieve proper optimization of gradient elution methods.

Methacrylate monolithic columns functionalized with epinephrine for capillary electrochromatography applications.

Epinephrine-bonded polymeric monoliths for capillary electrochromatography (CEC) were developed by nucleophilic substitution reaction of epoxide groups of poly(glycidyl-methacrylate-co-ethylenedimethacrylate) (poly(GMA-co-EDMA)) monoliths using epinephrine as nucleophilic reagent. The ring opening reaction under dynamic conditions was optimized. Successful chemical modification of the monolith surface was ascertained by in situ Raman spectroscopy characterization.

Determination of alcohols in essential oils by liquid chromatography with ultraviolet detection after chromogenic derivatization.

An HPLC-UV method to determine compounds having a hydroxyl functional group in plant essential oils is developed. The sample is diluted with 1,4-dioxane and the analytes are derivatized with phthalic anhydride. The derivatives (phthalates hemiesters) are separated on a C8 column using an acetonitrile (ACN)/water gradient.

Preparation and evaluation of lauryl methacrylate monoliths with embedded silver nanoparticles for capillary electrochromatography.

In this article, capillary columns constituted by lauryl methacrylate monoliths with embedded silver nanoparticles (AgNPs) were developed and tested. Two incorporation approaches of AgNPs in monoliths were explored. The AgNPs were either photogenerated in situ during polymerization of the monolith by UV irradiation, or incorporated to the polymerization mixture (ex situ).

Chemical composition, antioxidant properties and antimicrobial activity of the essential oil of Murraya paniculata leaves from the mountains of Central Cuba.

The essential oil of Murraya paniculata L leaves from the mountains of the Central Region of Cuba, obtained by hydrodistillation, was analyzed by gas chromatography-mass spectrometry. Eighteen compounds, accounting for 95.1% of the oil were identified.

γ-Oryzanol and tocopherol contents in residues of rice bran oil refining.

Rice bran oil (RBO) contains significant amounts of the natural antioxidants γ-oryzanol and tocopherols, which are lost to a large degree during oil refining. This results in a number of industrial residues with high contents of these phytochemicals. With the aim of supporting the development of profitable industrial procedures for γ-oryzanol and tocopherol recovery, the contents of these phytochemicals in all the residues produced during RBO refining were evaluated.

Classification of pumpkin seed oils according to their species and genetic variety by attenuated total reflection Fourier-transform infrared spectroscopy.

Attenuated total reflection Fourier-transform infrared spectroscopy (ATR-FTIR), followed by multivariate treatment of the spectral data, was used to classify seed oils of the genus Cucurbita (pumpkins) according to their species as C. maxima, C. pepo, and C.

Evaluation of molecular mass and tacticity of polyvinyl alcohol by non-equilibrium capillary electrophoresis of equilibrium mixtures of a polymer and a dye.

Non-equilibrium capillary electrophoresis of equilibrium mixtures (NECEEM) has been used to characterize polyvinyl alcohol (PVA). Commercial PVA samples with different molecular masses, from M(w)=15 up to 205 kDa, were used. According to the (13)C NMR spectra, the samples also differed in tacticity (stereoregularity).

Sensitive determination of polycyclic aromatic hydrocarbons in water samples using monolithic capillary solid-phase extraction and on-line thermal desorption prior to gas chromatography-mass spectrometry.

A methacrylate-based monolithic capillary column has been evaluated for the preconcentration of polycyclic aromatic hydrocarbons (PAHs) from environmental water samples. For this purpose, the monolyte was in situ synthesized in a 6cm×0.32mm id fused-silica capillary.

Chromium(VI) oxide oxidation of non-ethoxylated and ethoxylated alcohols for determination by electrospray ionization mass spectrometry.

A new derivatization procedure to increase the sensitivity of electrospray ionization mass spectrometry (ESI-MS) to non-ethoxylated and ethoxylated alcohols was investigated. The analytes were oxidized with chromium(VI) oxide and the resulting carboxylic and ethoxy-carboxylic acids were isolated by extraction with ethyl acetate; the extracts were alkalinized and infused into the ESI-MS system working in the negative-ion mode. The yields of the combined oxidation-extraction were ca.

Single-pump bi-dimensional LC applied to the characterization of derivatized fatty alcohol ethoxylates.

A column selection valve and a 6-port 2-position injection valve were combined to implement bi-dimensional LC in a system driven by a single pump. The system was applied to the separation of linear fatty alcohol ethoxylates with 12-18 carbon atoms in the hydrocarbon moiety, previous derivatization with diphenic anhydride. Separation on the first separation dimension (C(1)) was carried out with a propyl-diol column and an acetonitrile/aqueous ammonium acetate gradient.

Photo-polymerized lauryl methacrylate monolithic columns for CEC using lauroyl peroxide as initiator.

Lauryl methacrylate (LMA)-ester based monolithic columns photo-polymerized using lauroyl peroxide (LPO) as initiator were prepared, and their morphological and CEC properties were studied. The composition of the polymerization mixture (i.e.

Role of the co-surfactant nature in soybean w/o microemulsions.

The influence of the co-surfactant on physicochemical properties of w/o soybean oil microemulsions (MEs) has been studied. In spite of the similarity in phase diagrams, the MEs display remarkable differences when examined by electrical conductivity, dynamic light scattering (DLS), small angle X-ray scattering (SAXS) and linear voltammetry. When different short-chain alcohols were employed as co-surfactants, together with sodium dodecyl sulfate (SDS) as surfactant, the DLS results indicated the systems to be monodisperse.

Comparison of thermal- and photo-polymerization of lauryl methacrylate monolithic columns for CEC.

Lauryl methacrylate-based (LMA) monolithic columns for CEC, prepared using either thermal initiation or by UV-irradiation in the presence of AIBN have been compared. Thermal polymerization was carried out at 70 degrees C for 20 h. For UV initiation, the effects of the time exposure to UV light and irradiation energy were investigated.

Rapid determination of sterols in vegetable oils by CEC using methacrylate ester-based monolithic columns.

A method for the determination of sterols in vegetable oils by CEC with UV-Vis detection, using methacrylate ester-based monolithic columns, has been developed. To prepare the columns, polymerization mixtures containing monomers of different hydrophobicities were tried. The influence of composition of polymerization mixture was optimized in terms of porogenic solvent, monomers/porogens and monomer/crosslinker ratios.