Characterization method and analysis of misalignments in micro-concentrator photovoltaic modules.

Micro-scale concentrator photovoltaics (micro-CPV) is an emerging trend for the development of high-efficiency, low-cost photovoltaic systems. The miniaturization of optics and cells offers advantages in terms of performance and enables differentiation in the PV market. However, the sub-millimeter size of the solar cells used, the intrinsic narrow angular tolerance of CPV optical systems (typically around 0.

Roll-to-roll nanoimprint lithography of high efficiency Fresnel lenses for micro-concentrator photovoltaics.

Roll-to-roll nanoimprint lithography (R2R-NIL) is an enabling technology for the low-cost mass production of high-quality micro- and nano-sized optical elements. Particularly, the fabrication of Fresnel lenses using R2R-NIL is a promising approach to produce optical arrays for micro-concentrator photovoltaic modules. This work investigates the application of a continuous R2R imprinting process based on ultraviolet curing of transparent photopolymer resins (UV-NIL) to fabricate high-efficiency and low-cost Fresnel lenses.

Comparison of achromatic doublet on glass Fresnel lenses for concentrator photovoltaics.

Silicone on glass (SoG) Fresnel lenses are the reference technology in concentrator photovoltaics (CPV) because of their simplicity and low cost. Nevertheless, their performance is strongly limited by chromatic aberration. As an alternative, in order to overcome such limitation, achromatic doublet on glass (ADG) Fresnel lenses were proposed.

Indoor Experimental Assessment of the Efficiency and Irradiance Spot of the Achromatic Doublet on Glass (ADG) Fresnel Lens for Concentrating Photovoltaics.

We present a method to characterize achromatic Fresnel lenses for photovoltaic applications. The achromatic doublet on glass (ADG) Fresnel lens is composed of two materials, a plastic and an elastomer, whose dispersion characteristics (refractive index variation with wavelength) are different. We first designed the lens geometry and then used ray-tracing simulation, based on the Monte Carlo method, to analyze its performance from the point of view of both optical efficiency and the maximum attainable concentration.

Design and modeling of a cost-effective achromatic Fresnel lens for concentrating photovoltaics.

This paper presents a novel Fresnel lens capable of significantly reducing chromatic aberration in solar applications. The optical performance of this achromatic lens has been analyzed through ray-tracing simulations, showing a concentration factor three times higher than that attained by a classic silicone on glass (SOG) Fresnel lens while maintaining the same acceptance angle. This should avoid the need for a secondary optical element, reducing the cost associated with its manufacturing and assembly and increasing the module reliability.