Pickering emulsions stabilized with biodegradable nanoparticles for the co-encapsulation of two active pharmaceutical ingredients.

Innovative Pickering emulsions co-encapsulating two active pharmaceutical ingredients (API) were formulated for a topical use. An immunosuppressive agent, either cyclosporine A (CysA) or tacrolimus (TAC), was encapsulated at high drug loading in biodegradable and biocompatible poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NP). These NP stabilized the oil droplets (Miglyol) containing an anti-inflammatory drug, calcitriol (CAL).

Tiny dexamethasone palmitate nanoparticles for intravitreal injection: Optimization and in vivo evaluation.

Tiny nanoparticles of dexamethasone palmitate (DXP) were designed as transparent suspensions for intravitreal administration to treat age-related macular degeneration (AMD). The influence of three surfactants (PEG-40-stearate and Pluronic block copolymers F68 and F127) on nanoparticles size and stability was investigated and led to an optimal formulation based on Pluronic F127 stabilizing DXP nanoparticles. Size measurements and TEM revealed tiny nanoparticles (around 35 nm) with a low opacity, compatible with further intravitreal injection.

Erythromycin encapsulation in nanoemulsion-based delivery systems for treatment of Helicobacter pylori infection: Protection and synergy.

Poorly water-soluble and unstable compounds are difficult to develop as drug products using conventional formulation techniques. The aim of the present study was to develop and evaluate a nanoformulation prepared by a hot high-pressure homogenization method, which was a scalable and solvent-free process. We successfully prepared stable nanodispersions to protect a labile antibiotic, erythromycin.

Dexamethasone palmitate large porous particles: A controlled release formulation for lung delivery of corticosteroids.

We have optimized a formulation of a prodrug of dexamethasone (DXM), dexamethasone palmitate (DXP) for pulmonary delivery as a dry powder. Formulations were prepared by spray drying DXP with 1,2-Dipalmitoyl-sn-Glycero-3-Phosphocholine (DPPC) and Hyaluronic Acid (HA) as excipients. Large porous particles around 13 μm were produced with a tap density of 0.

Paclitaxel-loaded PEGylated nanocapsules of perfluorooctyl bromide as theranostic agents.

We optimize the encapsulation of paclitaxel (PTX) into nanocapsules made of a shell of poly(lactide-co-glycolide)-polyethylene glycol and a core of perfluorooctyl bromide (PFOB) to serve as theranostic agents. Two main challenges were met: keeping the imaging moiety (PFOB) encapsulated while loading the polymer shell with a hydrophobic drug very prone to crystallization. Encapsulation is performed by a modified emulsion-evaporation method leading to 120nm diameter nanocapsules with a drug loading compatible with tumor treatment.

Hyaluronic acid liposomal gel sustains delivery of a corticoid to the inner ear.

The inner ear is one of the most challenging organs for drug delivery, mainly because of the blood-perilymph barrier. Therefore, local rather than systemic drug delivery methods are being developed for inner ear therapy. In this work, we have evaluated the benefit of a hyaluronic acid liposomal gel for sustained delivery of a corticoid to the inner ear after local injection into the middle ear in a guinea pig model.

Pulmonary delivery of pyrazinamide-loaded large porous particles.

We have improved the aerodynamic properties of pyrazinamide loaded large porous particles (PZA-LPPs) designed for pulmonary delivery. To overcome the segregation of the different components occurring during the spray drying process and to obtain homogeneous LPPs, spray drying parameters were modified to decrease the drying speed. As a result, good aerodynamic properties for lung delivery were obtained with a fine particle fraction (FPF) of 40.

The unexpected increase of clotrimazole apparent solubility using randomly methylated β-cyclodextrin.

Clotrimazole (CTZ) and cyclodextrin (CD) inclusion complexes having improved apparent water solubility were obtained from phase solubility diagrams. β-CD (1.5% w/w) and hydroxypropyl-β-CD (40% w/w) offered poor CTZ solubility enhancements (12 and 384 times, respectively).

Formulation and pharmacokinetics of thermosensitive stealth® liposomes encapsulating 5-Fluorouracil.

Purpose: We optimize the encapsulation and investigate the pharmacokinetics of 5-Fluorouracil (5-FU) delivered by thermosensitive stealth(®) liposomes (TSLs) designed to trigger drug release upon hyperthermia using focused ultrasound (FUS).

Methods: 5-FU was encapsulated into liposomes made of 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine/cholesterol/1,2-Distearoyl-sn-glycero-3-phosphoethanolamine-N-PEG2000 either as a free molecule or complexed with copper-polyethylenimine. Heat-triggered drug release was evaluated using either a water bath or FUS.

Investigation of the complexation of albendazole with cyclodextrins for the design of new antiparasitic formulations.

Albendazole (ABZ) exhibits a potent antiparasitic activity against a broad spectrum of parasites. Unfortunately, the very low water solubility of ABZ (0.2 μg mL(-1), 0.

Development of antileishmanial lipid nanocomplexes.

Visceral leishmaniasis is a life-threatening disease that affects nearly a million people every year. The emergence of Leishmania strains resistant to existing drugs complicates its treatment. The purpose of this study was to develop a new lipid formulation based on nanocochleates combining two active drugs: Amphotericin B (AmB) and Miltefosine (HePC).

Novel isoprenoyl nanoassembled prodrug for paclitaxel delivery.

A new paclitaxel (Ptx) prodrug was designed by coupling a single terpene unit (MIP) to the hydroxyl group in position 2' of the drug molecule. Using a squalene derivative of polyethylene glycol (SQ-PEG) as surface active agent, the resulting bioconjugate (PtxMIP) self-assembled in water leading to the formation of stable nanoparticles (PtxMIP_SQ-PEG NPs) with an impressively high drug loading (82%). In vivo, the anticancer activity of this novel Ptx nanoassembled prodrug was compared to the conventional Cremophor-containing formulation (Taxol) on a murine model of breast cancer lung metastasis induced by intravenous injection of 4T1 tumor cells, genetically modified to stably express firefly luciferase.

Beads made of α-cyclodextrin and soybean oil: the drying method influences bead properties and drug release.

Freeze-dried beads made of α-cyclodextrin and soybean oil were reported previously as an efficient system for the oral delivery of lipophilic drugs. In the present study, oven-drying was evaluated as another method for drying beads. Oven-drying was optimised and the properties of the resulting beads were assessed.

Intestinal permeation enhancement of docetaxel encapsulated into methyl-β-cyclodextrin/poly(isobutylcyanoacrylate) nanoparticles coated with thiolated chitosan.

In this study we investigated the potential of mucoadhesive nanoparticles to enhance the intestinal permeability of docetaxel (Dtx). These nanoparticles were composed of methyl-β-cyclodextrin (Me-β-CD) combined with poly(isobutylcyanoacrylate) and coated with thiolated chitosan. In order to encapsulate the highest amount of Dtx into nanoparticles, the anionic emulsion polymerization of isobutylcyanoacrylate was carried out in a solution of Me-β-CD/Dtx inclusion complex.

Aerosolized liposomal amphotericin B: prediction of lung deposition, in vitro uptake and cytotoxicity.

To predict the efficacy and toxicity of pulmonary administration of liposomal amphotericin B (L-AMB) for the treatment or the prevention of pulmonary invasive aspergillosis, a multistage liquid impinger was used to estimate the concentrations of drug that could be attained in different lung compartments after nebulization. The highest concentration of amphotericin B was found in the alveolar compartment, where it was calculated that the concentration in the lung surfactant could reach 54 μM or more when 21.6 μmoles of drug as liposomes was nebulized.

Formulations based on alpha cyclodextrin and soybean oil: an approach to modulate the oral release of lipophilic drugs.

The purpose of this work was to investigate the potential of α-cyclodextrin combined to soybean oil-based formulations to modulate the release of a model drug, indomethacin. Dry emulsion, naked and coated beads were prepared from the same initial formulation using the same manufacturing process. Dry emulsion was selected to accelerate drug release while beads coated with α-cyclodextrin were designed to sustain it.

Long-circulating perfluorooctyl bromide nanocapsules for tumor imaging by 19FMRI.

PLGA-PEG nanocapsules containing a liquid core of perfluorooctyl bromide were synthesized by an emulsion-evaporation process and designed as contrast agents for (19)F MRI. Physico-chemical properties of plain and PEGylated nanocapsules were compared. The encapsulation efficiency of PFOB, estimated by (19)F NMR spectroscopy, is enhanced when using PLGA-PEG instead of PLGA.

Conformation of surface-decorating dextran chains affects the pharmacokinetics and biodistribution of doxorubicin-loaded nanoparticles.

Recent reports showed that subtle modifications of nanoparticle surface properties induced dramatic changes of interactions with serum proteins. The present work was aimed to investigate the effect of the conformation of dextran chains decorating the surface of poly(alkylcyanoacrylate) (PACA) nanoparticles on the pharmacokinetic and biodistribution of a model drug associated with the nanoparticles. Doxorubicin was associated with PACA nanoparticles prepared by anionic emulsion polymerization (AEP) (Dox-AEP) and redox radical emulsion polymerization (RREP) (Dox-RREP).

HPLC quantification of doxorubicin in plasma and tissues of rats treated with doxorubicin loaded poly(alkylcyanoacrylate) nanoparticles.

The long-term clinical use of doxorubicin (Dox), one of the most important anticancer agent in use, is limited by dose-related acute cardiotoxicity, myelo-suppression and multidrug resistance developed by cancer cells. To improve the antitumor efficacy and reduce the toxicity of Dox, many drug delivery systems have been developed, including poly(alkylcyanoacrylate) (PACA) nanoparticles. A new formulation of PACA nanoparticles with potential stealth properties were prepared by redox radical emulsion polymerization and associated to Dox in our laboratory.

Controlled release of a highly hydrophilic API from lipid microspheres obtained by prilling: analysis of drug and water diffusion processes with X-ray-based methods.

This study deals with the development of an oral controlled-release dosage form of a highly water-soluble antiepileptic drug. In this respect, drug-loaded spheroid particles close to 380 μm in diameter and composed of lipid binders were prepared by prilling. The purpose here was to thoroughly characterize the controlled-release mechanism of the drug in aqueous pH-6.

Influence of surface charge on the potential toxicity of PLGA nanoparticles towards Calu-3 cells.

Background: Because of the described hazards related to inhalation of manufactured nanoparticles, we investigated the lung toxicity of biodegradable poly (lactide-co-glycolide) (PLGA) nanoparticles displaying various surface properties on human bronchial Calu-3 cells.

Methods: Positively and negatively charged as well as neutral nanoparticles were tailored by coating their surface with chitosan, Poloxamer, or poly (vinyl alcohol), respectively. Nanoparticles were characterized in terms of size, zeta potential, and surface chemical composition, confirming modifications provided by hydrophilic polymers.

Bivalent sequential binding of docetaxel to methyl-β-cyclodextrin.

New docetaxel (Dtx) and cyclodextrin (CD) inclusion complexes having improved apparent water solubility (up to 9.98mgmL(-1)) were obtained from phase solubility diagrams. γ-CD and SBE-β-CD offered only poor solubility enhancements while considerable increases in apparent solubility were obtained with Me-β-CD (20%, w/w) and HP-β-CD (40%, w/w) (9.

A new nanomedicine based on didanosine glycerolipidic prodrug enhances the long term accumulation of drug in a HIV sanctuary.

New nanomedicines could improve drug accumulation in HIV sanctuaries and ameliorate their antiretroviral efficiency. In this view, we propose herein a combined strategy based on a biomimetic prodrug of ddI and its formulation in well-characterized lipid nanoobjects. The glycerolipidic prodrug of ddI (ProddINP) has been synthesized and its bulk structure was characterized.

Synthesis, characterization, and in vivo delivery of siRNA-squalene nanoparticles targeting fusion oncogene in papillary thyroid carcinoma.

We report the conjugation of the natural lipid squalene (SQ) with a small interfering RNA (siRNA), against the junction oncogene RET/PTC1, usually found in papillary thyroid carcinoma (PTC). The acyclic isoprenoid chain of squalene has been covalently coupled with siRNA RET/PTC1 at the 3'-terminus of the sense strand via maleimide-sulfhydryl chemistry. Remarkably, the linkage of siRNA RET/PTC1 to squalene led to an amphiphilic molecule that self-organized in H(2)O as siRNA-SQ RET/PTC1 nanoparticles (NPs).

Beads made of cyclodextrin and oil for the oral delivery of lipophilic drugs: in vitro studies in simulated gastro-intestinal fluids.

The aim of this work was to investigate the stability in vitro, in simulated gastro-intestinal fluids, of beads, made of α-cyclodextrin and soybean oil, and to study the release of progesterone, a model of lipophilic drug. This was evaluated over time by the monitoring of the proportion of intact beads, their volume and the percentage of progesterone dissolved. Their incubation in the simulated gastric fluid provoked a moderate reduction of their number (20%) and a decrease of their volume (50%) after 55 min.