Influence of the orientation of constructed blood vessels during the 3D printing on the measurement of the pseudo-oxygen saturation of an artificial blood substitute using conventional oxygen sensors: a test series.

Background: The development of phantoms to reduce animal testing or to validate new instruments or operation techniques is of increasing importance. For this reason, a blood circulation phantom was developed to test a newly designed retractor system with an integrated oxygen sensor. This phantom was used to evaluate the impact of the 3D printed blood vessel on the measurement of the oxygen saturation.

ARISE-The Accuracy Evaluation of a Patient-Specific 3D-Printed Biopsy System Based on MRI Data: A Cadaveric Study.

Background: Brain biopsy is required for the accurate specification and further diagnosis of intracranial findings. The conventional stereotactic frames are used clinically for biopsies and offer the highest possible precision. Unfortunately, they come with some insurmountable technical and logistical limitations.

Significance of EEG-electrode combinations while calculating filters with common spatial patterns.

Objective: Common spatial pattern (CSP) is a common filter technique used for pre-processing of electroencephalography (EEG) signals for imaginary movement classification tasks. It is crucial to reduce the amount of features especially in cases where few data is available. Therefore, different approaches to reduce the amount of electrodes used for CSP calculation are tried in this research.

Surveillance of tick-borne pathogens in domestic dogs from Chad, Africa.

Background: Tick-borne pathogens are understudied among domestic animals in sub-Saharan Africa but represent significant threats to the health of domestic animals and humans. Specifically, additional data are needed on tick-borne pathogens in Chad, Africa. Surveillance was conducted among domestic dogs in Chad for selected tick-borne pathogens to measure (1) the prevalence of antibodies against Anaplasma spp.

Analysis of the Technical Accuracy of a Patient-Specific Stereotaxy Platform for Brain Biopsy.

The use of stereotactic frames is a common practice in neurosurgical interventions such as brain biopsy and deep brain stimulation. However, conventional stereotactic frames have been shown to require modification and adaptation regarding patient and surgeon comfort as well as the increasing demand for individualized medical treatment. To meet these requirements for carrying out state-of-the-art neurosurgery, a 3D print-based, patient-specific stereotactic system was developed and examined for technical accuracy.

Students' perspectives regarding needs for and opportunities with mixed-reality education in neurosurgery at German medical schools.

Objective: Despite mixed reality being an emerging tool for tailored neurosurgical treatment and safety enhancement, the use of mixed reality in the education of German medical students is not established in the field of neurosurgery. The present study aimed to investigate medical students' perspectives on the use of mixed reality in neurosurgical medical education.

Methods: Between July 3, 2023, and August 31, 2023, an online survey was completed by German medical students through their affiliated student associations and educational institutions.

IMAGINER: improving accuracy with a mixed reality navigation system during placement of external ventricular drains. A feasibility study.

Objective: The placement of a ventricular catheter, that is, an external ventricular drain (EVD), is a common and essential neurosurgical procedure. In addition, it is one of the first procedures performed by inexperienced neurosurgeons. With or without surgical experience, the placement of an EVD according to anatomical landmarks only can be difficult, with the potential risk for inaccurate catheter placement.

Mixed reality for spine surgery: a step into the future with a human cadaveric accuracy study.

Objective: Current application of mixed reality as a navigation aid in the field of spinal navigation points to the potential of this technology in spine surgery. Crucial factors for acceptance include intuitive workflow, system stability, reliability, and accuracy of the method. The authors therefore aimed to investigate the accuracy of the system in visualization of anatomical structures using mixed reality in the example of pedicles of the thoracic spine in a human cadaveric study.

A New Concept for Cervical Expansion Screws Using Shape Memory Alloy: A Feasibility Study.

Background:  In general, sufficient anchoring of screws in the bone material ensures the intended primary stability.

Methods:  Shape memory materials offer the option of using temperature-associated deformation energy in a targeted manner to compensate the special situation of osteoporotic bones or the potential lack of anchoring. An expansion screw was developed for these purposes.

Development of a 3D-printed, patient-specific stereotactic system for bihemispheric deep brain stimulation.

The aim of the project was to develop a patient-specific stereotactic system that allows simultaneous and thus time-saving treatment of both cerebral hemispheres and that contains all spatial axes and can be used as a disposable product. Furthermore, the goal was to reduce the size and weight of the stereotactic system compared to conventional systems to keep the strain on the patient, who is awake during the operation, to a minimum. In addition, the currently mandatory computed tomography should be avoided in order not to expose the patient to harmful X-ray radiation as well as to eliminate errors in the fusion of CT and MRI data.

3D-printing of the elbow in complex posttraumatic elbow-stiffness for preoperative planning, surgery-simulation and postoperative control.

Background: Restoration of mobility of the elbow after post-traumatic elbow stiffening due to osteophytes is often a problem.

Methods: The anatomical structures were segmented within the CT-scan. Afterwards, the Multi Jet Fusion 3D-printing was applied to create the model made of biocompatible and steam-sterilizable plastic.

Functional improvement of patients with Parkinson syndromes using a rehabilitation training software.

Introduction: Individuals with Parkinsonian disorders often face limited access to specialized physiotherapy and movement training due to staff shortages and increasing disease incidence, resulting in a rapid decline in mobility and feelings of despair. Addressing these challenges requires allocating adequate resources and implementing specialized training programs to ensure comprehensive care and support. Regarding these problems, a computer software was invented that might serve as an additional home-based extension to conventional physiotherapy.

Development of an individual helmet orthosis for infants based on a 3D scan.

An early childhood skull deformity can have long-term health and aesthetic consequences for the growing toddler. Individual helmet therapy aims at a healthy growth of the skull shape, although not every helmet shape guarantees an optimal result. To ensure an optimal fit, a scanning procedure based on a hand-held surface scanner was evaluated.

A single haplotype is widespread in white ibis () from urban and rural sites in southern Florida.

The American white ibis (), a common bird species in Florida, has become increasingly urban, with many populations relying heavily on urban and suburban habitats, which may alter parasite transmission. Parasites of ibis, especially haemosporidians, are understudied. Avian haemosporidia can have a wide range of impacts on birds, including decreased reproductive success or increased mortality.

Development of 3D printed patient-specific skull implants based on 3d surface scans.

Sometimes cranioplasty is necessary to reconstruct skull bone defects after a neurosurgical operation. If an autologous bone is unavailable, alloplastic materials are used. The standard technical approach for the fabrication of cranial implants is based on 3D imaging by computed tomography using the defect and the contralateral site.

Impact of Shape Irregularity in Medial Sphenoid Wing Meningiomas on Postoperative Cranial Nerve Functioning, Proliferation, and Progression-Free Survival.

Medial sphenoid wing meningiomas (MSWM) are surgically challenging skull base tumors. Irregular tumor shapes are thought to be linked to histopathology. The present study aims to investigate the impact of tumor shape on postoperative functioning, progression-free survival, and neuropathology.

NextLens-The Next Generation of Surgical Navigation: Proof of Concept of an Augmented Reality System for Surgical Navigation.

 The aim of this work was the development of an augmented reality system including the functionality of conventional surgical navigation systems.  An application software for the Augmented Reality System HoloLens 2 from Microsoft was developed. It detects the position of the patient as well as position of surgical instruments in real time and displays it within the two-dimensional (2D) magnetic resonance imaging or computed tomography (CT) images.

Echinococcus Species Infections among Wild Canids in Pennsylvania, USA.

Echinococcus species are zoonotic tapeworms that can impact the health of wildlife, domestic animals, livestock, and humans. Two species of interest in North America are Echinococcus multilocularis and Echinococcus canadensis (Echinococcus granulosus sensu lato). The primary wildlife definitive hosts for E.

Case Report: Clinical Use of a Patient-Individual Magnetic Resonance Imaging-Based Stereotactic Navigation Device for Brain Biopsies in Three Dogs.

Three-dimensional (3D) printing techniques for patient-individual medicine has found its way into veterinary neurosurgery. Because of the high accuracy of 3D printed specific neurosurgical navigation devices, it seems to be a safe and reliable option to use patient-individual constructions for sampling brain tissue. Due to the complexity and vulnerability of the brain a particularly precise and safe procedure is required.

Notoedric mange (Notoedres centrifera) in two species of free-ranging rabbits from Florida, USA.

Mange is a contagious skin disease caused by different mite species affecting numerous domestic and wild animals, worldwide. This report details notoedric mange in an eastern cottontail (Sylvilagus floridanus) and in a marsh rabbit (Sylvilagus palustris) from Florida, USA. Clinical examination revealed similar gross lesions including poor nutritional condition, multifocal alopecia and hyperkeratosis.

Creation and validation of the harmonized Arabic version of the Expanded Prostate Cancer Index Composite for Clinical Practice (EPIC-CP).

Objectives: Tocreate and validate a translated Arabic version of the Expanded Prostate Cancer Index Composite for Clinical Practice (EPIC-CP), a validated patient-reported outcome (PRO) widely used for assessing the quality of life in patients with prostate cancer (PCa).

Patients And Methods: Using the established protocol as defined by the Professional Society for the Health Economics and Outcomes Research (ISPOR) for translating patient care questionnaires, a harmonised translated Arabic version of EPIC-CP was created. The questionnaire was tested in native Arabic speakers from four different Arabic countries (Saudi Arabia, United Arab Emirates, Jordan, and Kuwait).

Effects of Temephos (Abate®), Spinosad (Natular®), and Diflubenzuron on the Survival of Cyclopoid Copepods.

Dracunculus medinensis, also known as the African Guinea worm, is the causative agent of dracunculiasis and the focus of the global Guinea Worm Eradication Program (GWEP). Transmission of D. medinensis to humans occurs primarily by drinking water containing cyclopoid copepods infected with third-stage D.

A Comparative Study of Automatic Localization Algorithms for Spherical Markers within 3D MRI Data.

Localization of features and structures in images is an important task in medical image-processing. Characteristic structures and features are used in diagnostics and surgery planning for spatial adjustments of the volumetric data, including image registration or localization of bone-anchors and fiducials. Since this task is highly recurrent, a fast, reliable and automated approach without human interaction and parameter adjustment is of high interest.

Copepod consumption by amphibians and fish with implications for transmission of species.

Parasitic nematodes in the genus have a complex life cycle that requires more than one host species in both aquatic and terrestrial habitats. The most well-studied species, , is the causative agent of human Guinea worm disease (dracunculiasis). There are several other species that infect non-human animals, primarily wildlife (reptiles and mammals).