Publications by authors named "Grozema F"

Understanding the interplay between the kinetics and energetics of photophysical processes in perovskite-chromophore hybrid systems is crucial for realizing their potential in optoelectronics, photocatalysis, and light-harvesting applications. By combining steady-state optical characterizations and transient absorption spectroscopy, we have investigated the mechanism of interfacial charge transfer (CT) between colloidal CsPbBr nanoplatelets (NPLs) and surface-anchored perylene derivatives and have explored the possibility of controlling the CT rate by tuning the driving force. The CT driving force was tuned systematically by attaching acceptors with different electron affinities and by varying the bandgap of NPLs via thickness-controlled quantum confinement.

View Article and Find Full Text PDF

Spatiotemporal pH imaging using fluorescence lifetime imaging microscopy (FLIM) is an excellent technique for investigating dynamic (electro)chemical processes. However, probes that are responsive at high pH values are not available. Here, we describe the development and application of dedicated pH probes based on the 1-methyl-7-amino-quinolinium fluorophore.

View Article and Find Full Text PDF

A series of three perylenemonoimide--oligophenylene-dimethylaniline molecular dyads undergo photoinduced charge separation (CS) with anomalous distance dependence as a function of increasing donor-acceptor (DA) distances. A comprehensive experimental and computational investigation of the photodynamics in the donor-bridge-acceptor (DBA) chromophores reveals a clear demarcation concerning the nature of the CS accessed at shorter (bridgeless) and longer DA distances. At the shortest distance, a strong DA interaction and ground-state charge delocalization populate a hot excited state (ES) with prominent charge transfer (CT) character, via Franck-Condon vertical excitation.

View Article and Find Full Text PDF

One of the most promising properties of lead halide perovskite nanocrystals (NCs) is their defect tolerance. It is often argued that, due to the electronic structure of the conduction and valence bands, undercoordinated ions can only form localized levels inside or close to the band edges (i.e.

View Article and Find Full Text PDF

Donor-bridge-acceptor systems based on boron dipyrromethene (BODIPY) are attractive candidates for bio-imagining and sensing applications because of their sensitivity to temperature, micro-viscosity and solvent polarity. The optimization of the properties of such molecular sensors requires a detailed knowledge of the relation between the structure and the photophysical behavior in different environments. In this work we have investigated the excited-state dynamics of three acceptor-donor-acceptor molecules based on benzodithiophene and BODIPY in solvents of different polarities using a combination of ultrafast spectroscopy and DFT-based electronic structure calculations.

View Article and Find Full Text PDF

Two-dimensional (2D) hybrid organic-inorganic perovskites are an interesting class of semi-conducting materials. One of their main advantages is the large freedom in the nature of the organic spacer molecules that separates the individual inorganic layers. The nature of the organic layer can significantly affect the structure and dynamics of the 2D material; however, there is currently no clear understanding of the effect of the organic component on the structural parameters.

View Article and Find Full Text PDF

Structure-property relationships of donor-π-acceptor (D-π-A) type molecular dyad (pp-AD) and triads (pp-ADA and Me-pp-ADA) based on benzodithiophene and BODIPY with biphenyl spacers have been reported. Rotors pp-AD and pp-ADA showed efficient twisted intramolecular charge transfer (TICT) with near infrared (NIR) emissions at ∼712 nm and ∼725 nm with (pseudo-)Stokes shifts of ∼208 nm and ∼221 nm, respectively, and prominent solvatochromism. A structurally similar triad, Me-pp-ADA, with tetramethyl substituents on the BODIPY core instead was TICT inactive and exhibited excitation energy transfer with a transfer efficiency of ∼88% as revealed using steady state emission and transient absorption measurements.

View Article and Find Full Text PDF

Directing energy and charge transfer processes in light-harvesting antenna systems is quintessential for optimizing the efficiency of molecular devices for artificial photosynthesis. In this work, we report a novel synthetic method to construct two regioisomeric antenna molecules (1-D2A2 and 7-D2A2), in which the 4-(n-butylamino)naphthalene monoimide energy and electron donor is attached to the perylene monoimide diester (PMIDE) acceptor at the 1- and 7-bay positions, respectively. The non-symmetric structure of PMIDE renders a polarized distribution of the frontier molecular orbitals along the long axis of this acceptor moiety, which differentiates the electron coupling between the donor, attached at either the 1- or the 7-position, and the acceptor.

View Article and Find Full Text PDF

Recently two-dimensional (2D) hybrid organic-inorganic perovskites have attracted a lot of interest as more stable analogues of their three-dimensional counterparts for optoelectronic applications. However, a thorough understanding of the effect that this reduced dimensionality has on dynamical and structural behavior of individual parts of the perovskite is currently lacking. We have used molecular dynamics simulations to investigate the structure and dynamics of 2D Ruddlesden-Popper perovskite with the general formula BAMA Pb I, where BA is butylammonium, MA is methylammonium, and is the number of lead-iodide layers.

View Article and Find Full Text PDF

In recent years, a wide range of single-molecule devices has been realized, enabled by technological advances combined with the versatility offered by synthetic chemistry. In particular, single-molecule diodes have attracted significant attention with an ongoing effort to increase the rectification ratio between the forward and reverse current. Various mechanisms have been investigated to improve rectification, either based on molecule-intrinsic properties or by engineering the coupling of the molecule to the electrodes.

View Article and Find Full Text PDF

Metal-halide perovskite nanocrystals show promise as the future active material in photovoltaics, lighting, and other optoelectronic applications. The appeal of these materials is largely due to the robustness of the optoelectronic properties to structural defects. The photoluminescence quantum yield (PLQY) of most types of perovskite nanocrystals is nevertheless below unity, evidencing the existence of nonradiative charge-carrier decay channels.

View Article and Find Full Text PDF

In this work we demonstrate a novel approach to achieve efficient charge separation in dimensionally and dielectrically confined two-dimensional perovskite materials. Two-dimensional perovskites generally exhibit large exciton binding energies that limit their application in optoelectronic devices that require charge separation such as solar cells, photo-detectors and in photo-catalysis. Here, we show that by incorporating a strongly electron accepting moiety, perylene diimide organic chromophores, on the surface of the two-dimensional perovskite nanoplatelets it is possible to achieve efficient formation of mobile free charge carriers.

View Article and Find Full Text PDF

Two light-harvesting antenna molecules were obtained by positioning naphthalene monoimide energy donors at the imide position, instead of the bay positions, of perylene imide energy acceptors. Such rational design resulted in a complete suppression of parasitic intramolecular charge transfer without compromising the desired ultrafast rates of excitation energy transfer.

View Article and Find Full Text PDF

In this contribution we demonstrate a solid-state approach to triplet-triplet annihilation upconversion for application in a solar cell device in which absorption of near-infrared light is followed by direct electron injection into an inorganic substrate. We use time-resolved microwave photoconductivity experiments to study the injection of electrons into the electron-accepting substrate (TiO) in a trilayer device consisting of a triplet sensitizer (fluorinated zinc phthalocyanine), triplet acceptor (methyl subsituted perylenediimide), and smooth polycrystalline TiO. Absorption of light at 700 nm leads to the almost quantitative generation of triplet excited states by intersystem crossing.

View Article and Find Full Text PDF

Two-dimensional (2D) hybrid perovskites make up an emerging class of materials for optoelectronic applications in which inorganic octahedral layers are separated by nonconductive large organic cations. This leads to a high-dimensional and dielectric confinement and hence a high exciton binding energy, which severely limits their application in devices in which charge carrier separation is required. In this work, we achieve improved charge separation by replacing nonconductive organic cations with organic charge-transfer complexes consisting of a pyrene donor and a tetracyanoquinodimethane acceptor.

View Article and Find Full Text PDF

Formamidinium (FA) lead iodide perovskite materials feature promising photovoltaic performances and superior thermal stabilities. However, conversion of the perovskite α-FAPbI phase to the thermodynamically stable yet photovoltaically inactive δ-FAPbI phase compromises the photovoltaic performance. A strategy is presented to address this challenge by using low-dimensional hybrid perovskite materials comprising guaninium (G) organic spacer layers that act as stabilizers of the three-dimensional α-FAPbI phase.

View Article and Find Full Text PDF

Two of the key parameters that characterize the usefulness of organic semiconductors for organic or hybrid organic/inorganic solar cells are the mobility of charges and the diffusion length of excitons. Both parameters are strongly related to the supramolecular organization in the material. In this work we have investigated the relation between the solid-state molecular packing and the exciton diffusion length, charge carrier mobility, and charge carrier separation yield using two perylene diimide (PDI) derivatives which differ in their substitution.

View Article and Find Full Text PDF

Singlet fission (SF) involves the conversion of one excited singlet state into two lower excited triplet states and has received considerable renewed attention over the past decade. This Perspective highlights recent developments and emerging concepts of SF in solid-state crystalline materials. Recent experiments showed the crucial role of vibrational modes in speeding up SF, and theoretical modeling has started to define an optimal energetic landscape and intermolecular orientation of chromophores for highly efficient singlet fission.

View Article and Find Full Text PDF

Perylene diimides (PDIs) are attractive chromophores that exhibit singlet exciton fission (SF) and have several advantages over traditional SF molecules such as tetracene and pentacene; however, their photophysical properties relating to SF have received only limited attention. In this study, we explore how introduction of bulky bromine atoms in the so-called bay-area PDIs, resulting in a nonplanar structure, affects the solid-state packing and efficiency of singlet fission. We found that changes in the molecular packing have a strong effect on the temperature dependent photoluminescence, expressed as an activation energy.

View Article and Find Full Text PDF

We present ab initio calculations (DFT and SOC-GW) of the optoelectronic properties of different hybrid-halide perovskites, namely X-PbI (X = methylamonimum, formamidinium, guanidinium, hydrazinium, and hydroxylammonium). These calculations shed new light on how the substitution of different organic cations in the material influences its optoelectronic properties. Our simulations show a significant modification of the lattice parameter and band gap of the material upon cation substitution.

View Article and Find Full Text PDF

We report herein a versatile and user-friendly synthetic methodology based on sequential functionalization that enables the synthesis of previously unknown perylene bisimide (PBI) dyes with up to five different substituents attached to the perylene core (e.g., compound ).

View Article and Find Full Text PDF

The rotational dynamics of an organic cation in hybrid halide perovskites is intricately linked to the phase transitions that are known to occur in these materials; however, the exact relation is not clear. We have performed detailed model studies on methylammonium lead iodide and formamidinium lead iodide to unravel the relation between rotational dynamics and phase behavior. We show that the occurrence of the phase transitions is due to a subtle interplay between dipole-dipole interactions between the organic cations, specific (hydrogen bonding) interactions between the organic cation and the lead iodide lattice, and deformation of the lead iodide lattice in reaction to the reduced rotational motion of the organic cations.

View Article and Find Full Text PDF

The excited-state dynamics of perylene-based bichromophoric light harvesting antenna systems has been tailored by systematic modification of the molecular structure and by using solvents of increasing polarity in the series toluene, chloroform, and benzonitrile. The antenna systems consist of blue light absorbing naphthalene monoimide (NMI) energy donors (, , and ) and the perylene derived green light absorbing energy acceptor moieties, 1,7-perylene-3,4,9,10-tetracarboxylic tetrabutylester (), 1,7-perylene-3,4,9,10-tetracarboxylic monoimide dibutylester (), and 1,7-perylene-3,4,9,10-tetracarboxylic bisimide (). The design of these antenna systems is such that all exhibit ultrafast excitation energy transfer (EET) from the excited donor to the acceptor, due to the effective matching of optical properties of the constituent chromophores.

View Article and Find Full Text PDF
Article Synopsis
  • Researchers are exploring halide double perovskites (HDPs), like CsAgBiBr, as safe alternatives to traditional lead halide perovskites, focusing on their charge transport properties.
  • Studies reveal that charge mobility in these materials is influenced by phonon scattering, similar to lead-based perovskites, with a dependence on temperature that suggests effective charge transport capabilities.
  • The successful preparation of thin films from a wet chemical process of mixed antimony-bismuth compounds supports the development of photovoltaic devices using these nontoxic HDPs with adjustable band gaps.
View Article and Find Full Text PDF