De- and Re-Structuring of Starch to Control the Melt and Solid State Visco-Elasticity as Method for Getting New Multi Component Compounds with Scalable Properties.

The aim of the article was to design and develop new thermodynamically stable starch-based compounds, with scalable properties, that are melt-processable into finished products by classic or 3D printing methods. This is based on phenomena of de-structuring, entanglement compatibilization, and re-structuring of starch, along with the modification of the polymer, polyvinyl alcohol (PVA), by following an experimental sequence involving pre-treatment and melt compounding in two stages. The new compounds selection was made considering the dependence of viscoelastic properties on formulation and flowing conditions in both the melted and solid states.

Pancreatic Cancer: A Review of Risk Factors.

Pancreatic adenocarcinoma is one of the most lethal types of gastrointestinal cancer despite the latest medical advances. Its incidence has continuously increased in recent years in developed countries. The location of the pancreas can result in the initial symptoms of neoplasia being overlooked, which can lead to a delayed diagnosis and a subsequent reduction in the spectrum of available therapeutic options.

Pregnancy in Patients with Inflammatory Bowel Diseases-A Literature Review.

In recent years, we have faced an increasing incidence of inflammatory bowel disease (IBD), especially among young people, affecting them during their reproductive years. The paucity of data and reduced knowledge regarding the evolution of the disease during pregnancy and the adverse effects of the therapy on the mother and infant increase voluntary childlessness in this group of patients. Depending on the type of IBD, severity and surgical or medical management, this can negatively affect the pregnancy.

Mapping HPV 16 Sub-Lineages in Anal Cancer and Implications for Disease Outcomes.

The incidence of anal cancer is rising worldwide. As identified in cervical cancer management, an improvement in the early detection and management of anal pre-cancer is essential. In other cancers associated with human papillomavirus (HPV), HPV 16 sub-lineages have been shown to be associated with disease status and prognosis.

Control of Dielectric and Mechanical Properties of Styrenic Block Copolymer by Graphite Incorporation.

The structure-property relationship of dielectric elastomers, as well as the methods of improving the control of this relationship, has been widely studied over the last few years, including in some of our previous works. In this paper, we study the control, improvement, and correlation, for a significant range of temperatures, of the mechanical and dielectric properties of polystyrene-b-(ethylene-co-butylene)-b-styrene (SEBS) and maleic-anhydride-grafted SEBS (SEBS-MA) by using graphite (G) as filler in various concentrations. The aim is to analyze the suitability of these composites for converting electrical energy into mechanical energy or vice versa.

Valorization of Polypropylene Waste in the Production of New Materials with Adequate Mechanical and Thermal Properties for Environmental Protection.

Innovative composites based on polypropylene waste impurified cu HDPE (PPW) combined with two thermoplastic block-copolymers, namely styrene-butadiene-styrene (SBSBC) and styrene-isoprene-styrene (SISBC) block-copolymers, and up to 10 wt% nano-clay, were obtained by melt blending. SBSBC and SISBC with almost the same content of polystyrene (30 wt%) were synthesized by anionic sequential polymerization and used as compatibilizers for PPW. Optical microscopy evaluation of the PPW composites showed that the n-clay was encapsulated into the elastomer.

HPV status and HPV16 viral load in anal cancer and its association with clinical outcome.

Background: The incidence of anal cancer is increasing globally. Evidence-based improvement in early detection and management of this morbid cancer is thus required. In other cancers associated with Human Papillomavirus (HPV), viral status and dynamics, including viral load (VL) has been shown to influence clinical outcome.

Wood Surface Modification with Hybrid Materials Based on Multi-Walled Carbon Nanotubes.

In this work, new treatments based on multi-walled carbon nanotubes (MWCNTs), MWCNTs decorated with zinc oxide (ZnO), MWCNTs decorated with hydroxyapatite (HAp) and MWCNTs decorated with silver (Ag) nanoparticles dispersed in PHBHV solution are proposed for improving sound oak wood properties. We hypothesize that the solutions containing decorated MWCNTs will be more efficient as wood consolidants, not only because of the improved mechanical properties of the treated wood but also because of the hydrophobic layer created on the wood surface. In order to test these hypotheses, the treatments' potential was investigated by a number of complex methods, such as colorimetric parameter measurements, water absorption tests, mechanical tests, artificial aging and antifungal tests.

New approach for hepatocellular carcinoma treatment.

Hepatocellular carcinoma (HCC) is the fifth most common cancer, with an increasing incidence in recent years. The prognosis is unfavorable, representing the third most frequent cause of cancer-related death worldwide. This is because it generally develops in patients with pre-existing liver pathology, thus limiting therapeutic options.

Biocompatible and Antimicrobial Cellulose Acetate-Collagen Films Containing MWCNTs Decorated with TiO Nanoparticles for Potential Biomedical Applications.

This research focuses on the synthesis of multi-walled carbon nanotubes (MWCNTs) decorated with TiO nanoparticles (NPs) and incorporated in cellulose acetate-collagen film in order to obtain a new biomaterial with potential biomedical applications and improved antimicrobial activity. The successful decoration of the MWCNTs with TiO NPs was confirmed by several structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction and transmission electron microscopy. The obtained nanocomposites were further incorporated into cellulose acetate-collagen films, at different concentrations and absorption kinetics, antimicrobial activity and in vitro biocompatibility of the obtained films was investigated.

Preparation and Biocompatibility of Poly Methyl Methacrylate (PMMA)-Mesoporous Bioactive Glass (MBG) Composite Scaffolds.

In recent years, the rising number of bone diseases which affect millions of people worldwide has led to an increased demand for materials with restoring and augmentation properties that can be used in therapies for bone pathologies. In this work, PMMA- MBG composite scaffolds containing ceria (0, 1, 3 mol%) were obtained by the phase separation method. The obtained composite scaffolds were characterized by X-ray diffraction, infrared spectroscopy, and scanning electron microscopy.

Hybrid Materials Based on Multi-Walled Carbon Nanotubes and Nanoparticles with Antimicrobial Properties.

In this study, multi-walled carbon nanotubes (MWCNTs) were decorated with different types of nanoparticles (NPs) in order to obtain hybrid materials with improved antimicrobial activity. Structural and morphological analysis, such as Fourier transformed infrared spectroscopy, Raman spectroscopy, X-ray diffraction, transmission electron microscopy, environmental scanning electron microscopy/energy-dispersive X-ray spectroscopy and the Brunauer-Emmett-Teller technique were used in order to investigate the decoration of the nanotubes with NPs. Analysis of the decorated nanotubes showed a narrow size distribution of NPs, 7-13 nm for the nanotubes decorated with zinc oxide (ZnO) NPs, 15-33 nm for the nanotubes decorated with silver (Ag) NPs and 20-35 nm for the nanotubes decorated with hydroxyapatite (HAp) NPs, respectively.

Phenotypic spectrum and genomics of undiagnosed arthrogryposis multiplex congenita.

Background: Arthrogryposis multiplex congenita (AMC) is characterised by congenital joint contractures in two or more body areas. AMC exhibits wide phenotypic and genetic heterogeneity. Our goals were to improve the genetic diagnosis rates of AMC, to evaluate the added value of whole exome sequencing (WES) compared with targeted exome sequencing (TES) and to identify new genes in 315 unrelated undiagnosed AMC families.

Development of thermoplastic composites based on recycled polypropylene and waste printed circuit boards.

In the last several years, the electronic waste, especially printed circuit boards have significantly increased over the world, generating one of the highest rates of solid waste. The recycling process of the printed circuit boards implies mainly the recovery of metals and glass fibers, while the reuse of the polymeric support has remained largely in the phase of research. In this paper, the non-metallic part of printed circuit boards was used as filler (up to 30%), but also to improve the fire resistance of thermoplastic composites based on recycled polypropylene and diene block-copolymers.

Nanomaterials Used in Conservation and Restoration of Cultural Heritage: An Up-to-Date Overview.

In the last few years, the preservation of cultural heritage has become an important issue globally, due to the fact that artifacts and monuments are continually threatened by degradation. It is thus very important to find adequate consolidators that are capable of saving and maintaining the natural aspect of these objects. This study aims to provide an updated survey of the main nanomaterials used for the conservation and restoration of cultural heritage.

Merged bilateral arterial duct and circumflex retroesophageal right aortic arch in a fetus with normal intracardiac anatomy.

We report the case of a fetus with anamnios sequence and VACTERL syndrome, having a circumflex right aortic arch. Two arterial ducts join anteriorly to form a common vessel that connects to the pulmonary trunk with confluent pulmonary branches. Embryologically, the dorsal right 6th aortic arch did not disappear and the aortic arch development stopped in a symmetrical state with an exceptional "Y-shaped" merged bilateral arterial duct.

Methods of synthesis, properties and biomedical applications of polyhydroxyalkanoates: a review.

This study aims to provide an overview of the main polyhydroxyalkanoates (PHAs) used in medical applications. In this review, it has been demonstrated that the properties of PHAs can be controlled both by varying the concentration of units in the copolymer and the substrate for PHA production. Another way of controlling the mechanical properties of PHAs is varying the 3HV content, such as the case of P(3HB-co-3HV).

Metastatic neuroendocrine pancreatic tumor - Case report.

Pancreatic neuroendocrine tumors (NETs) are rare neoplasms that develop from the endocrine tissues of the pancreas. They have a better overall prognosis than pancreatic adenocarcinoma. However, all commonly used classification systems reflect a separation between more indolent, well-differentiated tumors and far more aggressive poorly differentiated types that behave clinically more like small-cell carcinoma of the lung.

The evaluation of non-enzymatic antioxidants effects in limiting tumor- associated oxidative stress, in a tumor rat model.

Active oxygen species are produced as a consequence of normal aerobic metabolism. Of these, free radicals are usually metabolized or inactivated in vivo by a team of antioxidants. Individual members are a trained team fighting antioxidants to prevent the generation of ROS, destroy or oxidizing potential of capture.

Parameters of oxidative stress variation depending on the concentration of inorganic zinc compounds.

Zinc deficiency is a problem faced by a large number of people, a U.S. study showing that only 46% of the population aged over 71 years has the best amount of zinc in the body.