A 'Frugal' EGFET Sensor for Waterborne HS.

Hydrogen sulphide (HS) is a toxic gas soluble in water, HS, as a weak acid. Since HS usually originates from the decomposition of faecal matter, its presence also indicates sewage dumping and possible parallel waterborne pathogens associated with sewage. We here present a low footprint ('frugal') HS sensor as an accessible resource for water quality monitoring.

Bridged EGFET Design for the Rapid Screening of Sorbents as Sensitisers in Water-Pollution Sensors.

We further simplify the most 'user-friendly' potentiometric sensor for waterborne analytes, the 'extended-gate field effect transistor' (EGFET). This is accomplished using a 'bridge' design, that links two separate water pools, a 'control gate' (CG) pool and a 'floating gate' (FG) pool, by a bridge filled with agar-agar hydrogel. We show electric communication between electrodes in the pools across the gel bridge to the gate of an LND150 FET.

Parallel Potentiometric and Capacitive Response in a Water-Gate Thin Film Transistor Biosensor at High Ionic Strength.

We show that an SnO-based water-gate thin film transistor (WGTFT) biosensor responds to a waterborne analyte, the spike protein of the SARS-CoV-2 virus, by a parallel potentiometric and capacitive mechanism. We draw our conclusion from an analysis of transistor output characteristics, which avoids the known ambiguities of the common analysis based on transfer characteristics. Our findings contrast with reports on organic WGTFT biosensors claiming a purely capacitive response due to screening effects in high ionic strength electrolytes, but are consistent with prior work that clearly shows a potentiometric response even in strong electrolytes.

Disposable silicon-based all-in-one micro-qPCR for rapid on-site detection of pathogens.

Rapid screening and low-cost diagnosis play a crucial role in choosing the correct course of intervention when dealing with highly infectious pathogens. This is especially important if the disease-causing agent has no effective treatment, such as the novel coronavirus SARS-CoV-2, and shows no or similar symptoms to other common infections. Here, we report a disposable silicon-based integrated Point-of-Need transducer (TriSilix) for real-time quantitative detection of pathogen-specific sequences of nucleic acids.

Water-Gated Transistor Using Ion Exchange Resin for Potentiometric Fluoride Sensing.

We introduce fluoride-selective anion exchange resin sorbents as sensitisers into membranes for water-gated field effect transistors (WGTFTs). Sorbents were prepared via metal (La or Al)-loading of a commercial macroporous aminophosphonic acid resin, Puromet MTS9501, and were filled into a plasticised poly(vinyl chloride) (PVC) phase transfer membrane. We found a potentiometric response (membrane potential leading to WGTFT threshold shift) to fluoride following a Langmuir-Freundlich (LF) adsorption isotherm with saturated membrane potential up to ~480 mV, extremely low characteristic concentration c = 1/K, and picomolar limit of detection (LoD), even though ion exchange did not build up charge on the resin.

Sickness absenteeism among outsourced hygiene and cleaning workers at a university hospital in São Paulo, Brazil, 2015-2017.

Background: Absenteeism refers to frequent absences from work without producing a medical certificate or having been granted sick leave.

Objective: To establish the rate of short-term sickness absenteeism (1 to 15 days) among outsourced hygiene and cleaning workers at a university hospital.

Methods: Retrospective analysis of all medical and dental certificates collected by the contractor along two years (2015 through 2017).

Monitoring the lead-and-copper rule with a water-gated field effect transistor.

We use the natural zeolite clinoptilolite as the sensitive element in a plasticised PVC membrane. Separating a sample pool and a reference pool with such a membrane in water-gated SnO thin-film transistor (SnO WGTFT) leads to membrane potential, and thus transistor threshold shift in response to the common drinking water pollutants Pb or Cu in the sample pool. Threshold shift with ion concentration, c, follows a Langmuir-Freundlich (LF) characteristic.

Low cost, high sensitivity detection of waterborne Al cations and F anions via the fluorescence response of a morin derivative dye.

Morin dye is known as a cheap and readily available selective 'off → on' fluorescent sensitiser when immobilised in a phase transfer membrane for the detection of Al ions. Here, a morin derivative, NaMSA, which readily dissolves in water with good long-term stability is used in conjunction with a fibre optic transducer with lock-in detection to detect Al in drinking water below the potability limit. The combination of a water soluble dye and the fibre optic transducer require neither membrane preparation nor a fluorescence spectrometer yet still display a high figure-of- merit.

Monolithic Solder-On Nanoporous Si-Cu Contacts for Stretchable Silicone Composite Sensors.

We report a method of creating solderable, mechanically robust, electrical contacts to interface (soft) silicone-based strain sensors with conventional (hard) solid-state electronics using a nanoporous Si-Cu composite. The Si-based solder-on electrical contact consists of a copper-plated nanoporous Si top surface formed through metal-assisted chemical etching and electroplating and a smooth Si bottom surface that can be covalently bonded onto silicone-based strain sensors through plasma bonding. We investigated the mechanical and electrical properties of the contacts proposed under relevant ranges of mechanical stress for applications in physiological monitoring and rehabilitation.

Cellulose Fibers Enable Near-Zero-Cost Electrical Sensing of Water-Soluble Gases.

We report an entirely new class of printed electrical gas sensors that are produced at near "zero cost". This technology exploits the intrinsic hygroscopic properties of cellulose fibers within paper; although it feels and looks dry, paper contains substantial amount of moisture, adsorbed from the environment, enabling the use of wet chemical methods for sensing without manually adding water to the substrate. The sensors exhibit high sensitivity to water-soluble gases (e.

Adaptive and sensitive fibre-optic fluorimetric transducer for air- and water-borne analytes.

A sensitive fibre optic fluorescence intensity meter has been designed and built as a transducer to detect quenching of conjugated polymer fluorescence with minimum adjustment between air- and waterborne analytes. Only generic, commercially available parts including optical fibres, solvents, airbrush, standard optical and electronic parts, and a digital lock-in amplifier have been used, avoiding the need for a fluorescence spectrometer. To test the instrument, optical fibres were sensitised with the generic fluorescent poly(phenylene-vinylene) derivative MDMO-PPV and exposed to a variety of vapour pressures, and concentrations in water, of the nitroaromatic explosive 2,4 dinitrotoluene (DNT).

Autocatalytic Metallization of Fabrics Using Si Ink, for Biosensors, Batteries and Energy Harvesting.

Commercially available metal inks are mainly designed for planar substrates (for example, polyethylene terephthalate foils or ceramics), and they contain hydrophobic polymer binders that fill the pores in fabrics when printed, thus resulting in hydrophobic electrodes. Here, a low-cost binder-free method for the metallization of woven and nonwoven fabrics is presented that preserves the 3D structure and hydrophilicity of the substrate. Metals such as Au, Ag, and Pt are grown autocatalytically, using metal salts, inside the fibrous network of fabrics at room temperature in a two-step process, with a water-based silicon particle ink acting as precursor.

Hemovigilance: the experience of transfusion reaction reporting in a Teaching Hospital.

Objective: To describe the occurrence of immediate transfusion reactions received by the Risk Management Department of Hospital São Paulo.

Method: Cross-sectional and retrospective study which analyzed the notification sheets of transfusion reactions that occurred between May 2002 and December 2016 and were included in the Hemovigilance National System.

Results: One thousand five hundred and forty-eight transfusion reaction notification sheets were analyzed, all of which concerned immediate reactions associated with packed red blood cells (72.

'Rough guide' evanescent wave optrode for colorimetric metalloporphyrine sensors.

When films of zinc 5-(4-carboxyphenyl),10,15,20-triphenyl porphyrin (ZnTPP) are exposed to waterborne amine in pH- neutral or alkaline media, both Q- band and Soret band respond with a change of absorbance due to the donation of amine 'lone pair' electrons to the metalloprophyrin π orbital. However, this is difficult to reveal with a conventional spectrometer even under high amine concentration. We therefore introduce optical fibres coated with ZnTPP into a bespoke 'light balance' evanescent wave absorbance meter [doi:10.

A membrane-free cation selective water-gated transistor.

Sensors for the detection of waterborne cations are of great practical interest, and chemistry has synthesised a formidable catalogue of cation selective complexation agents ('ionophores') as selective sensitisers. Current ionophore-based sensors separate the complexation of the cation by the ionophore, and the transduction of complexation into an electrical signal, into separate components. We here unite both functions into a single, sensitised semiconducting layer of a water-gated organic thin film transistor (OTFT).

Innate cation sensitivity in a semiconducting polymer.

Water-gated organic thin film transistors (OTFTs) using the hole transporting semiconducting polymer, poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT), show an innate response of their threshold voltage to the addition of divalent metal cations to the gating water, without deliberately introducing an ion-sensitive component. A similar threshold response is shown for several divalent cations, but is absent for monovalent cations. Response is absent for transistors using the inorganic semiconductor ZnO, or the similar organic semiconductor poly(3-hexylthiophene) (rrP3HT), instead of PBTTT.

A water-gated organic thin film transistor as a sensor for water-borne amines.

The p-type semiconducting polymer Poly(2,5-bis(3-hexadecylthiophen-2-yl)thieno[3,2-b]thiophene) (PBTTT) displays innate sensitivity to water-borne amines. We demonstrate this with the help of water-gated PBTTT thin film transistors (TFTs). When octylamine is added to the gating water, TFTs respond with a significantly reduced saturated drain current.

Precursor-route ZnO films from a mixed casting solvent for high performance aqueous electrolyte-gated transistors.

We significantly improved the performance of precursor-route semiconducting zinc oxide (ZnO) films in electrolyte-gated thin film transistors (TFTs). We find that the organic precursor to ZnO, zinc acetate (ZnAc), dissolves more readily in a 1 : 1 mixture of ethanol (EtOH) and acetone than in pure EtOH, pure acetone, or pure isopropanol. XPS and SEM characterisation show improved morphology of ZnO films converted from a mixed solvent cast ZnAc precursor compared to the EtOH cast precursor.

Transcriptome of an entomophthoralean fungus (Pandora formicae) shows molecular machinery adjusted for successful host exploitation and transmission.

Pandora formicae is an obligate entomopathogenic fungus from the phylum Entomophthoromycota, known to infect only ants from the genus Formica. In the final stages of infection, the fungus induces the so-called summit disease syndrome, manipulating the host to climb up vegetation prior to death and fixing the dead cadaver to the surface, all to increase efficient spore dispersal. To investigate this fascinating pathogen-host interaction, we constructed interaction transcriptome libraries from two final infection stages from the material sampled in the field: (1) when the cadavers were fixed, but the fungus had not grown out through the cuticle and (2) when the fungus was growing out from host cadaver and producing spores.

Identification of a β-glucosidase from the Mucor circinelloides genome by peptide pattern recognition.

Mucor circinelloides produces plant cell wall degrading enzymes that allow it to grow on complex polysaccharides. Although the genome of M. circinelloides has been sequenced, only few plant cell wall degrading enzymes are annotated in this species.

Hydrolysis of wheat arabinoxylan by two acetyl xylan esterases from Chaetomium thermophilum.

The thermophilic filamentous ascomycete Chaetomium thermophilum produces functionally diverse hemicellulases when grown on hemicellulose as carbon source. Acetyl xylan esterase (EC 3.1.

The prominent role of fungi and fungal enzymes in the ant-fungus biomass conversion symbiosis.

Molecular studies have added significantly to understanding of the role of fungi and fungal enzymes in the efficient biomass conversion, which takes place in the fungus garden of leaf-cutting ants. It is now clear that the fungal symbiont expresses the full spectrum of genes for degrading cellulose and other plant cell wall polysaccharides. Since the start of the genomics era, numerous interesting studies have especially focused on evolutionary, molecular, and organismal aspects of the biological and biochemical functions of the symbiosis between leaf-cutting ants (Atta spp.

The fungal symbiont of Acromyrmex leaf-cutting ants expresses the full spectrum of genes to degrade cellulose and other plant cell wall polysaccharides.

Background: The fungus gardens of leaf-cutting ants are natural biomass conversion systems that turn fresh plant forage into fungal biomass to feed the farming ants. However, the decomposition potential of the symbiont Leucocoprinus gongylophorus for processing polysaccharides has remained controversial. We therefore used quantifiable DeepSAGE technology to obtain mRNA expression patterns of genes coding for secreted enzymes from top, middle, and bottom sections of a laboratory fungus-garden of Acromyrmex echinatior leaf-cutting ants.