Quantification and risk assessment of polar organic contaminants in two chalk streams in Hampshire, UK using the Chemcatcher passive sampler.

Freshwater systems are facing a number of pressures due to the inputs of polar organic contaminants from a range of sources including agriculture, domestic and industry. The River Itchen and River Test are two sensitive chalk streams in Southern England that are experiencing a decline in invertebrate communities. We used Chemcatcher passive samplers to measure time-weighted average concentrations (14 days) of polar pollutants at nine sites on the River Itchen and eight sites on the River Test over a 12-month period.

Robotic beyond total mesorectal excision (TME) for locally advanced or recurrent rectal cancer: a systematic review protocol.

Introduction: The surgical treatment for locally advanced or recurrent rectal cancer requires oncological clearance with a pelvic exenteration or a beyond total mesorectal excision (TME). The aim of this systematic review is to explore the safety and feasibility of robotic surgery in locally advanced and recurrent rectal cancer by evaluating perioperative outcomes, oncological clearance rates, and survival and recurrence rates postrobotic beyond TME surgery.

Methods: The systematic review will include studies published until the end of December 2023.

Monitoring of polar organic compounds in fresh waters using the Chemcatcher passive sampler.

The monitoring of polar organic pollutants in surface water is now undertaken to fulfil a number of legislative requirements. Passive sampling is being frequently used for this purpose and includes the commercially available Chemcatcher device. This protocol is based on knowledge that has been acquired over the past ten years in the use of the Chemcatcher for monitoring a wide range of polar organic compounds in freshwater.

Evaluating major anthropogenic VOC emission sources in densely populated Vietnamese cities.

Volatile organic compounds (VOCs) play an important role in urban air pollution, both as primary pollutants and through their contribution to the formation of secondary pollutants, such as tropospheric ozone and secondary organic aerosols. In this study, more than 30 VOC species were continuously monitored in the two most populous cities in Vietnam, namely Ho Chi Minh City (HCMC, September-October 2018 and March 2019) and Hanoi (March 2019). In parallel with ambient VOC sampling, grab sampling was used to target the most prevalent regional-specific emission sources and estimate their emission factors (EFs).

Occurrence of organic pollutants in the River Itchen and River Test-two chalk streams in Southern England, UK.

The River Itchen and River Test, two chalk streams in Southern England, are sites of special scientific interest. These ecosystems face a number of environmental pressures from anthropogenic inputs of organic pollutants. Hence, we investigated the occurrence of these chemicals within the two catchments.

Pesticide fate during drinking water treatment determined through passive sampling combined with suspect screening and multivariate statistical analysis.

Emerging contaminants such as polar pesticides pose a potential risk to human health due to their presence in drinking water. However, their occurrence and fate in drinking water treatment plants is poorly understood. In this study we use passive sampling coupled to suspect screening and multivariate analysis to describe pesticide fate throughout the treatment stream of an operational drinking water treatment plant.

A miniaturized passive sampling-based workflow for monitoring chemicals of emerging concern in water.

The miniaturization of a full workflow for identification and monitoring of contaminants of emerging concern (CECs) is presented. Firstly, successful development of a low-cost small 3D-printed passive sampler device (3D-PSD), based on a two-piece methacrylate housing that held up to five separate 9 mm disk sorbents, is discussed. Secondly, a highly sensitive liquid chromatography-tandem mass spectrometry (LC-MS/MS) method reduced the need for large scale in-laboratory apparatus, solvent, reagents and reference material quantities for in-laboratory passive sampler device (PSD) calibration and extraction.

Passive sampling with suspect screening of polar pesticides and multivariate analysis in river catchments: Informing environmental risk assessments and designing future monitoring programmes.

Pollution of surface water by polar pesticides is a major environmental risk, particularly in river catchments where potable water supplies are abstracted. In these cases, there is a need to understand pesticide sources, occurrence and fate. Hence, we developed a novel strategy to improve water quality management at the catchment scale using passive sampling coupled to suspect screening and multivariate analysis.

Rapid direct analysis of river water and machine learning assisted suspect screening of emerging contaminants in passive sampler extracts.

A novel and rapid approach to characterise the occurrence of contaminants of emerging concern (CECs) in river water is presented using multi-residue targeted analysis and machine learning-assisted in silico suspect screening of passive sampler extracts. Passive samplers (Chemcatcher®) configured with hydrophilic-lipophilic balanced (HLB) sorbents were deployed in the Central London region of the tidal River Thames (UK) catchment in winter and summer campaigns in 2018 and 2019. Extracts were analysed by; (a) a rapid 5.

Key Role of NO Radicals in the Production of Isoprene Nitrates and Nitrooxyorganosulfates in Beijing.

The formation of isoprene nitrates (IsN) can lead to significant secondary organic aerosol (SOA) production and they can act as reservoirs of atmospheric nitrogen oxides. In this work, we estimate the rate of production of IsN from the reactions of isoprene with OH and NO radicals during the summertime in Beijing. While OH dominates the loss of isoprene during the day, NO plays an increasingly important role in the production of IsN from the early afternoon onwards.

Use of Chemcatcher® passive sampler with high-resolution mass spectrometry and multi-variate analysis for targeted screening of emerging pesticides in water.

Pesticides present at trace concentrations are a common cause of poor water quality. Their concentrations can change dynamically, due to the stochastic nature of pesticide pollution. Consequently, characterisation of pesticide residues that are intermittently present, poses significant monitoring and analytical challenges.

Detection of pharmaceuticals in wastewater effluents-a comparison of the performance of Chemcatcher® and polar organic compound integrative sampler.

Chemcatcher and POCIS passive sampling devices are widely used for monitoring polar organic pollutants in water. Chemcatcher uses a bound Horizon Atlantic™ HLB-L sorbent disk as receiving phase, whilst the POCIS uses the same material in the form of loose powder. Both devices (n = 3) were deployed for 21 days in the final effluent at three wastewater treatment plants in South Wales, UK.

Using high-frequency phosphorus monitoring for water quality management: a case study of the upper River Itchen, UK.

Increased concentrations of phosphorus (P) in riverine systems lead to eutrophication and can contribute to other environmental effects. Chalk rivers are known to be particularly sensitive to elevated P levels. We used high-frequency (daily) automatic water sampling at five distinct locations in the upper River Itchen (Hampshire, UK) between May 2016 and June 2017 to identify the main P species (including filterable reactive phosphorus, total filterable phosphorus, total phosphorus and total particulate phosphorus) present and how these varied temporally.

Calibration and field application of an innovative passive sampler for monitoring groundwater quality.

This study describes the development of a novel Empore™ disk-based passive sampler specially adapted to groundwater monitoring. The sampler was calibrated in the laboratory using conditions that corresponded to groundwater (i.e.

Applications for Passive Sampling of Hydrophobic Organic Contaminants in Water-A Review.

We comprehensively review the current state-of-the-art of environmental monitoring for hydrophobic organic contaminants in aqueous matrices using passive sampling devices. Principles of the theory of passive sampling are presented. Strategies for passive sampler design and operation, limitations in performance and data quality-assurance and quality-control are reviewed.

Use of the Chemcatcher® passive sampler and time-of-flight mass spectrometry to screen for emerging pollutants in rivers in Gauteng Province of South Africa.

Many rivers in urbanised catchments in South Africa are polluted by raw sewage and effluent to an extent that their ecological function has been severely impaired. The Hennops and Jukskei Rivers lying in the Hartbeespoort Dam catchment are two of the worst impacted rivers in South Africa and are in need of rehabilitation. Passive sampling (Chemcatcher® with a HLB receiving phase) together with high-resolution tandem mass spectrometry-targeted screening was used to provide high sensitivity and selectivity for the identification of a wide range of emerging pollutants in these urban waters.

Use of passive sampling and high resolution mass spectrometry using a suspect screening approach to characterise emerging pollutants in contaminated groundwater and runoff.

Groundwater systems are being increasingly used to provide potable and other water supplies. Due to human activities, a range of organic pollutants is often detected in groundwater. One source of groundwater contamination is via stormwater infiltration basins, however, there is little information on the types of compounds present in these collection systems and their influence on the underlying groundwater.

Comparison of different monitoring methods for the measurement of metaldehyde in surface waters.

Metaldehyde is recognised as an emerging contaminant. It is a powerful molluscicide and is the active compound in many types of slug pellets used for the protection of crops. The application of pellets to land generally takes place between August and December when slugs thrive.

Measuring metaldehyde in surface waters in the UK using two monitoring approaches.

Metaldehyde is a molluscicide and the active ingredient in formulated slug pellets used for the protection of crops. Due to its mobility in the environment it is frequently found in river catchments, often at concentrations exceeding the EU Drinking Water Directive limit of 100 ng L-1 for a single pesticide. This presents a major problem for water companies in the UK where such waters are abstracted for production of potable drinking water supplies.

Calibration and application of the Chemcatcher® passive sampler for monitoring acidic herbicides in the River Exe, UK catchment.

Acidic herbicides are used to control broad-leaved weeds. They are stable, water-soluble, and with low binding to soil are found frequently in surface waters, often at concentrations above the EU Drinking Water Directive limit of 0.10 μg L.

Calibration and field evaluation of the Chemcatcher® passive sampler for monitoring metaldehyde in surface water.

Metaldehyde is a potent molluscicide. It is the active ingredient in most slug pellets used for crop protection. This polar compound is considered an emerging pollutant.

Development and evaluation of a new diffusive gradients in thin-films technique for measuring organotin compounds in coastal sediment pore water.

Organotins present a toxicological risk to biota in the aquatic environment. Understanding the behaviour of these compounds in sediment is challenging, with sophisticated analytical techniques required for their measurement. We investigated the use of silica-bound sorbents for diffusive gradients in thin-films (DGT) adsorption gels to pre-concentrate five organotins (monobutlytin (MBT), dibutyltin (DBT), tributyltin (TBT), diphenyltin (DPhT), triphenyltin (TPhT)) found frequently in coastal sediment.

Effectiveness of real-time polymerase chain reaction assay for the detection of Mycobacterium tuberculosis in pathological samples: a systematic review and meta-analysis.

Background: Rapid and accurate diagnosis of tuberculosis (TB) is key to manage the disease and to control and prevent its transmission. Many established diagnostic methods suffer from low sensitivity or delay of timely results and are inadequate for rapid detection of Mycobacterium tuberculosis (MTB) in pulmonary and extra-pulmonary clinical samples. This study examined whether a real-time polymerase chain reaction (RT-PCR) assay, with a turn-a-round time of 2 h, would prove effective for routine detection of MTB by clinical microbiology laboratories.

A simple, low cost GC/MS method for the sub-nanogram per litre measurement of organotins in coastal water.

Tributyltin (TBT) is a legacy pollutant in the aquatic environment, predominantly from its use in anti-foulant paints and is listed as a priority hazardous substance in the European Union's Water Framework Directive (WFD). Measuring low concentrations of TBT and other organotins (e.g.