This publisher's note contains a correction to Opt. Lett.49, 969 (2024)10.
View Article and Find Full Text PDFLidar sensing can be performed by 1572 nm pulsed laser sources. This work presents the development of a fiber amplifier at this wavelength emitting 1 µs FWHM Gaussian pulses at a repetition rate of 7.5 kHz.
View Article and Find Full Text PDFWe present a hybrid fiber/bulk laser source designed for CO and wind monitoring using differential absorption LIDAR (DIAL) and coherent detection at 2.05 µm. This source features a master oscillator power amplifier (MOPA) architecture made of four fiber stages and one single-pass, end-pumped, bulk amplifier.
View Article and Find Full Text PDFThis work reports on an all-fiber pulsed laser source for simultaneous remote sensing of concentration and wind velocity in the 2.05 µm region. The source is based on a polarization-maintaining master oscillator power amplifier (MOPA) architecture.
View Article and Find Full Text PDFWe report on the realization of an all-fiber laser source that delivers single-frequency pulses at 1645 nm, on a linearly polarized single-mode beam, based on stimulated Raman scattering in passive fibers. The pulse energy reaches 14 µJ for a repetition rate of 20 kHz, and the spectral linewidth is 9.5 MHz for 100 ns square pulses.
View Article and Find Full Text PDFWe report on the performances of a coherent DIAL/Doppler fiber lidar called VEGA, allowing for simultaneous measurements of methane and wind atmospheric profiles. It features a 10µJ, 200 ns, 20 kHz fiber pulsed laser emitter at 1645 nm, and it has been designed to monitor industrial methane leaks and fugitive emissions in the environment. The system performance has been assessed for range-resolved (RR) and integrated-path (IP) methane measurements in natural background conditions (i.
View Article and Find Full Text PDFWe report on our realization of a high-power holmium doped fiber laser, together with the validation of our numerical simulation of the laser. We first present the measurements of the physical parameters that are mandatory to model accurately the laser-holmium interactions in our silica fiber. We then describe the realization of the clad-pumped laser, based on a triple-clad large mode area holmium (Ho) doped silica fiber.
View Article and Find Full Text PDFIn the framework of space-borne CO lidar development, the transmitter is a critical unit. We report on the development and the assessment of performances of a 2-μm single-frequency thulium fiber laser pumped Q-switched Ho:YLF laser. To fulfill the requirements of space-based operation, a master oscillator power amplifier architecture has been chosen, and the oscillator works in double-pulse operation.
View Article and Find Full Text PDFIn Er^{3+}:Y_{2}SiO_{5}, we demonstrate the selective optical addressing of the ^{89}Y^{3+} nuclear spins through their superhyperfine coupling with the Er^{3+} electronic spins possessing large Landé g factors. We experimentally probe the electron-nuclear spin mixing with photon echo techniques and validate our model. The site-selective optical addressing of the Y^{3+} nuclear spins is designed by adjusting the magnetic field strength and orientation.
View Article and Find Full Text PDFWe implement the ROSE protocol in an erbium-doped solid, compatible with the telecom range. The ROSE scheme is an adaptation of the standard two-pulse photon echo to make it suitable for a quantum memory. We observe a retrieval efficiency of 40% for a weak laser pulse in the forward direction by using specific orientations of the light polarizations, magnetic field, and crystal axes.
View Article and Find Full Text PDFOchratoxin A (OTA) is a mycotoxin produced mainly by species of Aspergillus and Penicillium. Contamination of food with OTA is a major consumer health hazard. In Cote D'Ivoire, preventing OTA contamination has been the subject of extensive study.
View Article and Find Full Text PDFThe time-reversal (TR) protocol we implement in an erbium-doped YSO crystal is based on photon echoes but avoids the storage of the signal to be processed. Unlike other approaches implying digitizing or highly dispersive optical fibers, the proposed scheme reaches the μs range and potentially offers high bandwidth, both required for RADAR applications. In this Letter, we demonstrate faithful reversal of arbitrary pulse sequences with 6 μs duration and 10 MHz bandwidth.
View Article and Find Full Text PDFThe spatially resolved spectral (S2) imaging method is applied on an active microstructured fiber, with a multi-filament core (MFC). This type of fiber has been designed to be the last amplifying stage of a source for a long range coherent lidar. Studying the influence of the bending radius on the modal content with or without gain, we demonstrate that an upper-bound of the high-order modes content can be found by performing the S2 imaging on the bleached fiber.
View Article and Find Full Text PDFWe observe the two- and three-pulse photon echo emission from a scattering powder, obtained by grinding a Pr3+:Y2SiO5 rare earth doped single crystal. We show that the collective emission is coherently constructed over several grains. A well defined atomic coherence can therefore be created between randomly placed particles.
View Article and Find Full Text PDFWe demonstrate phase-conjugate optical coherence tomography (PC-OCT) using a classical source of phase-sensitive cross-correlated beams to achieve measurement improvements shared by quantum OCT (Q-OCT): a factor-of-2 enhancement in axial resolution and even-order dispersion cancellation. Compared with coincidence counting used in Q-OCT, PC-OCT employs standard photodetection that results in much faster data acquisitions. This work belongs to a new class of classical techniques inspired by quantum methods that have advantages once thought to be exclusively quantum mechanical.
View Article and Find Full Text PDFWe demonstrate that single-mode broadband amplified spontaneous parametric downconversion, combined with optical parametric amplification, can be used as a classical source of phase-sensitive cross-correlated beams. We first study the single spatial mode emission and the spectral brightness properties of the parametric fluorescence, produced in periodically poled MgO-doped lithium niobate. Using the same single-pass bulk-crystal configuration for a pulsed optical parametric amplifier, we achieve a gain of approximately 20 dB at an average pump power of 2W, and explain the pulse narrowing observed at the output of both parametric fluorescence and amplification in the regime of high gain.
View Article and Find Full Text PDFA photon echo experiment in Tm(3+):YAG is reported that shows, for the first time to the authors' knowledge, the time-domain equivalent of the transition from near- to far-field diffraction, including Talbot self-imaging effects. The experiment demonstrates the huge dispersion capability of photon echoes and opens the way to further exploration of space-time duality.
View Article and Find Full Text PDFA novel design for an extended-cavity diode laser is presented. The cavity contains an electro-optic prism for synchronous tuning of the cavity length and the grating's incident angle. A simple analysis of the cavity is presented.
View Article and Find Full Text PDFWe propose a time-domain interferometry method that circumvents the usual sampling rate condition. It was devised for the retrieval of fast optical response functions in low-repetition-rate experiments. Its potential temporal dynamic range matches the spectral resolution and bandwidth requirements of the arbitrarily shaped spectral filters that are engraved in amorphous spectral hole-burning materials.
View Article and Find Full Text PDFWe propose to use photon echoes in rare-earth-doped crystals to implement the Fourier-transform chirp algorithm. The process is considered for application to spectral analysis of fast radio-frequency signals. Compared with surface acoustic wave devices, the proposed scheme gives access to the larger bandwidths of rare-earth-doped crystals and greater flexibility.
View Article and Find Full Text PDFSpectral hole-burning (SHB) technology is considered for >10-GHz instantaneous bandwidth signal-processing applications. In this context we report on what is believed to be the first demonstration of a SHB microwave spectrometer. A set of gratings engraved in a SHB crystal is used to filter one sideband of the optically carried microwave signal.
View Article and Find Full Text PDFWe demonstrate the generation of optically carried, broadly tunable, millimeter-wave signals with a dual-frequency single-axis Nd:YAG laser. A frequency difference as high as 127 GHz is reached thanks to an intracavity electro-optically tunable etalon made of lead zirconate tantalate (PLZT) ceramic. We show that the available frequency range is actually limited by the bandwidth of the amplification medium, namely, far beyond the usually accepted free spectral range value in the case of a single-axis laser.
View Article and Find Full Text PDFWe propose and demonstrate a novel active stabilization scheme for wide and fast frequency chirps. The system measures the laser instantaneous frequency deviation from a perfectly linear chirp, thanks to a digital phase detection process, and provides an error signal that is used to servo-loop control the chirped laser. This way, the frequency errors affecting a laser scan over 10 GHz on the millisecond timescale are drastically reduced below 100 kHz.
View Article and Find Full Text PDFWe report what is believed to be the first experimental demonstration of a wideband spectral coherent process driven by a frequency-agile laser in a rare-earth-ion-doped crystal. The very demanding chirp-transform algorithm is studied in detail and is applied to radio-frequency spectral analysis. A time-bandwidth product of 24,000 is demonstrated.
View Article and Find Full Text PDFWe report what we believe is the first experimental demonstration of photon echoes in an amplifying rare-earth-ion-doped crystal. Population inversion is achieved by optical pumping, which yields high-power photon echoes, with an energy gain of as much as a factor of 5. Effects of the pump on the photon echo process highlight the advantages of an amplifying crystal.
View Article and Find Full Text PDF