Microwave-assisted one-pot conversion of agro-industrial wastes into levulinic acid: An alternate approach.

Brewery liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry waste (SIW) were evaluated as alternative feedstocks for levulinic acid (LA) production via microwave-assisted acid-catalyzed thermal hydrolysis. LA production of 204, 160, 66, 49 and 12 g/kg was observed for BLW, BSG, APS, APUS, and SIW, respectively, at 140 °C, 40 g/L substrate concentration (SC), 60 min and 2 N HCl (acid concentration). Based on the screening studies, BLW and BSG were selected for optimization studies using response surface methodology.

Hydrolytic pre-treatment methods for enhanced biobutanol production from agro-industrial wastes.

Brewery industry liquid waste (BLW), brewery spent grain (BSG), apple pomace solid wastes (APS), apple pomace ultrafiltration sludge (APUS) and starch industry wastewater (SIW) have been considered as substrates to produce biobutanol. Efficiency of hydrolysis techniques tested to produce fermentable sugars depended on nature of agro-industrial wastes and process conditions. Acid-catalysed hydrolysis of BLW and BSG gave a total reducing sugar yield of 0.

A Unique Historical Case to Understand the Present Sustainable Development.

Every innovation seeks to become a profitable business, with this considered to be the engine for economic prosperity. When an innovation is revolutionary, its long-term consequences can be revolutionary too. The Haber-Bosh process for ammonia synthesis is arguably the twentieth century's most significant innovation, and its importance to global food production and its impact on the environment are not expected to diminish over the coming decades.

Biomachining: metal etching via microorganisms.

The use of microorganisms to remove metal from a workpiece is known as biological machining or biomachining, and it has gained in both importance and scientific relevance over the past decade. Conversely to mechanical methods, the use of readily available microorganisms is low-energy consuming, and no thermal damage is caused during biomachining. The performance of this sustainable process is assessed by the material removal rate, and certain parameters have to be controlled for manufacturing the machined part with the desired surface finish.

Role of Thiobacillus thioparus in the biodegradation of carbon disulfide in a biofilter packed with a recycled organic pelletized material.

This study reports the biodegradation of carbon disulfide (CS2) in air biofilters packed with a pelletized mixture of composted manure and sawdust. Experiments were carried out in two lab-scale (1.2 L) biofiltration units.

Reverse-flow strategy in biofilters treating CS₂ emissions.

The bacteriostatic properties of carbon disulphide (CS₂) hamper its biodegradation in conventional biofilters. The response of four biofilters operating in downflow mode and reverse-flow mode was compared in a laboratory-scale plant treating CS₂ under sudden short-term changes in operating conditions. A process shutdown for 24 h, an inlet concentration increase and an interruption of the inlet air humidification for 48 h at an empty bed residence time (EBRT) of 240 s did not impact significantly on biodegradation performance, regardless of flow mode.

Fungal/bacterial interactions during the biodegradation of TEX hydrocarbons (toluene, ethylbenzene and p-xylene) in gas biofilters operated under xerophilic conditions.

The treatment of air contaminated with toluene, ethylbenzene, and p-xylene was assayed in three laboratory-scale biofilters, each consisting of two modules connected in series, packed with a pelletized organic fertilizer and inoculated with a toluene-degrading liquid enrichment culture. Biofilters were operated in parallel for 185 days in which the volumetric organic loading rate was progressively increased. The operation regime was subjected to drying out, so that packing humidity generally remained below 40%.