Structural analysis of a fibre-reinforced composite blade for a 1 MW tidal turbine rotor under degradation of seawater.

This paper presents a structural performance study of a fibre-reinforced composite blade for a 1 MW tidal turbine rotor blade that was designed for a floating tidal turbine device. The 8-m long blade was manufactured by ÉireComposites Teo and its structural performance was experimentally evaluated under mechanical loading in the Large Structures Research Laboratory at the University of Galway. Composite coupons, applied with an accelerated ageing process, were tested to evaluate the influence of seawater ageing effects on the performance of the materials.

Tidal stream to mainstream: mechanical testing of composite tidal stream blades to de-risk operational design life.

Tidal energy has seen a surge of interest in recent years with several companies developing technology to harness the power of the world's oceans where the operational capacity in Europe was over 11 MW in 2020. One such developer is the partnership of SCHOTTEL Hydro (Germany) and Sustainable Marine (UK) who have developed a scalable multi-turbine device equipped with 70 kW turbines and capable of operating in arrays at sites around the world. The technology to harness tidal energy is still at a relatively early stage of development; hence, de-risking of component parts plays a vital role on the road to commercialisation.

Peridomestic conditions affect La Crosse virus entomological risk by modifying the habitat use patterns of its mosquito vectors.

Anthropogenic land-use change may affect the transmission risk for endemic vector-borne diseases such as La Crosse encephalitis. In this study, we applied a comparative ecological approach to evaluate differences in vector species abundance, gonotrophic status, and environmental variables among six residential habitats (historical case houses) and six paired adjacent forest patches in a La Crosse virus endemic area of North Carolina. A total of 93,158 container spp.

RESEARCH ON PASSIVE SOIL DEPRESSURIZATION SYSTEMS: STATE OF THE ART AND LAB TEST ON-GOING.

There is strong evidence both internationally and in Ireland that the correct installation of passive prevention systems in new buildings is the most cost-effective way of protecting the population against radon. Previous work considering membranes, granular fill material in the aggregate layer beneath the slab and sump system has been conducted in Ireland to improve the protection of buildings from radon. The implications of research on passive sumps potential to reduce radon concentrations are significant, as if it can be shown that the installation of passive sumps in Irish building is effective; this could constitute a low-cost, passive, sustainable method for minimizing radon levels in buildings.

An investigation of a passive opened top-end pipe as an alternative solution for passive soil depressurisation systems for indoor radon mitigation.

This study carried out a series of large-scale experimental tests and numerical simulations to investigate the performance of a passive opened top-end pipe as an alternative solution for passive soil depressurisation systems for indoor radon mitigation. Measurements were conducted in terms of wind velocity, extracted air velocity and negative pressure at the sump-end inside the pipe. Investigations were performed with controlled and natural wind conditions.

Control of Persistent Infection Relies on Constant Thymic Output Despite Increased Peripheral Antigen-Specific T Cell Immunity.

Recent thymic emigrants are the youngest subset of peripheral T cells and their involvement in combating persistent bacterial infections has not been explored. Here, we hypothesized that CD4 recent thymic emigrants are essential immune mediators during persistent infection. To test this, we thymectomized adult mice either prior to, or during, persistent infection.

Radon mitigation by soil depressurisation case study: Radon concentration and pressure field extension monitoring in a pilot house in Spain.

A one-year monitoring study was conducted in a pilot house with extremely high radon levels to investigate the ability and efficiency of radon mitigation by soil depressurisation (SD) both active and passive. The study included monitoring of radon concentration, pressure field extension (PFE) under the slab and some atmospheric parameters for different testing phases. Periods in which the house remained closed to foster radon accumulation were alternated with phases of active and passive soil depressurisation under different conditions.

Large-scale experimental investigations of specified granular fill materials for radon mitigation by active and passive soil depressurisations.

A series of large-scale experimental tests were performed to examine the flow behaviour of the T1 Struc and T2 Perm specified granular fill materials with active and passive depressurisations. Granular materials were compacted and tested at various compacted thicknesses. Compaction works were performed using a field compactor and compaction degrees of the materials were found to be higher than those induced by a standardised small-scale compactor.

Aquatic thermal conditions predict the presence of native and invasive rock pool Aedes (Diptera: Culicidae) in the southern Appalachians, U.S.A.

The native rock pool mosquito, Aedes atropalpus (Coquillett), and the invasive Aedes japonicus (Theobald) have been found in many types of artificial and natural containers throughout North America. Little is known about the ecology of these two species in habitats where they co-occur, although multiple investigators have reported the decline of the native species concurrent with the introduction and spread of the invasive species. Here we report the results of riverine rock pool collections (n=503) in the southern Appalachian Mountains between 2009-2015.

Investigation of gas flow through soils and granular fill materials for the optimisation of radon soil depressurisation systems.

The purpose of this study is to investigate gas flow through different types of granular fill materials and soil by means of a series of experimental laboratory tests, in relation to soil depressurisation systems for radon reduction under buildings and the soil surrounding the foundation. Gas permeability characterisation of materials used as granular fill material beneath the slab in buildings is a key parameter for the optimum performance of soil depressurisation systems to mitigate radon. A test apparatus was developed, adapted from previous studies, to measure the gas permeability of the samples and Finite Element Method numerical simulations were validated to simulate the flow behaviour through them.

Assessing the environmental impact of the dairy processing industry in the Republic of Ireland.

This Research Communication describes the methodology used and the subsequent results obtained for an assessment of the environmental impact associated with the manufacture of dairy products in the Republic of Ireland. As the Irish dairy industry changes and grows, it is necessary to have a benchmark of the environmental performance of the sector if it is to remain sustainable in the future. In order to estimate the environmental impact, life cycle assessment has been implemented, which has been structured in accordance with the International Organisation for Standardisation guidelines.

DairyWater: striving for sustainability within the dairy processing industry in the Republic of Ireland.

This Review describes the objectives and methodology of the DairyWater project as it aims to aid the Irish dairy processing industry in achieving sustainability as it expands. With the abolition of European milk quotas in March 2015, the Republic of Ireland saw a surge in milk production. The DairyWater project was established in anticipation of this expansion of the Irish dairy sector in order to develop innovative solutions for the efficient management of water consumption, wastewater treatment and the resulting energy use within the country's dairy processing industry.

Investigation of sub-slab pressure field extension in specified granular fill materials incorporating a sump-based soil depressurisation system for radon mitigation.

Design of bearing layers (granular fill material layers) is important for a house with a soil depressurisation (SD) system for indoor radon mitigation. These layers should not only satisfy the bearing capacity and serviceability criteria but should also provide a sufficient degree of the air permeability for the system. Previous studies have shown that a critical parameter for a SD system is the sub-slab pressure field extension in the bearing layers, but this issue has not been systematically investigated.

Investigation of Thermal Behaviour of a Hybrid Precasted Concrete Floor using Embedded Sensors.

Concrete structures expand and contract in response to temperature changes which can result in structural strain and cracking. However, there is a limited amount of robust field data on hybrid concrete floor structures. Shortage of such data impacts on our understanding of how concrete structures respond to thermal effects and ultimately the overall design of concrete structures.

Adjuvant selection regulates gut migration and phenotypic diversity of antigen-specific CD4 T cells following parenteral immunization.

Infectious diarrheal diseases are the second leading cause of death in children under 5 years, making vaccines against these diseases a high priority. It is known that certain vaccine adjuvants, chiefly bacterial ADP-ribosylating enterotoxins, can induce mucosal antibodies when delivered parenterally. Based on this, we reasoned vaccine-specific mucosal cellular immunity could be induced via parenteral immunization with these adjuvants.

Salmonella infection: Interplay between the bacteria and host immune system.

Salmonella infection causes morbidity and mortality throughout the world with the host immune response varying depending on whether the infection is acute and limited, or systemic and chronic. Additionally, Salmonella bacteria have evolved multiple mechanisms to avoid or subvert immunity to its own benefit and often the anatomical location of infection plays a role in both the immune response and bacterial fate. Here, we provide an overview of the interplay between the immune system and Salmonella, while discussing how different host and bacterial factors influence the outcome of infection.

Environmental impacts of milk powder and butter manufactured in the Republic of Ireland.

The abolition of the milk quota system that was in place in Europe was abolished in 2015, which instigated an immediate increase in milk production in many European countries. This increase will aid in addressing the world's ever growing demand for food, but will incur increased stresses on the environmental impact and sustainability of the dairy industry. In this study, an environmental life cycle assessment was performed in order to estimate the environmental impacts associated with the manufacture of milk powder and butter in the Republic of Ireland.

Synovitis and the risk of knee osteoarthritis: the MOST Study.

Objective: To identify the independent relation of synovitis with incident radiographic knee osteoarthritis (OA) after adjusting for other structural factors known to cause synovitis.

Design: We examined MRIs from knees that developed incident radiographic OA from the Multicenter Osteoarthritis Study (MOST) and compared these case knees with controls that did not develop OA. We examined baseline MRIs for knees developing OA at any time up to 84 months follow-up.

Magnetic resonance imaging-based three-dimensional bone shape of the knee predicts onset of knee osteoarthritis: data from the osteoarthritis initiative.

Objective: To examine whether magnetic resonance imaging (MRI)-based 3-dimensional (3-D) bone shape predicts the onset of radiographic knee osteoarthritis (OA).

Methods: We conducted a case-control study using data from the Osteoarthritis Initiative by identifying knees that developed incident tibiofemoral radiographic knee OA (case knees) during followup, and matching them each to 2 random control knees. Using knee MRIs, we performed active appearance modeling of the femur, tibia, and patella and linear discriminant analysis to identify vectors that best classified knees with OA versus those without OA.

Physical activity, alignment and knee osteoarthritis: data from MOST and the OAI.

Objective: To determine the effect of physical activity on knee osteoarthritis (OA) development in persons without knee injury and according to knee alignment.

Design: We combined data from Multicenter Osteoarthritis (MOST) and Osteoarthritis Initiative (OAI), studies of persons with or at high risk of OA. Subjects had long limb and repeated posteroanterior knee radiographs and completed the physical activity survey for the elderly (PASE).

Valgus malalignment is a risk factor for lateral knee osteoarthritis incidence and progression: findings from the Multicenter Osteoarthritis Study and the Osteoarthritis Initiative.

Objective: To study the effect of valgus malalignment on knee osteoarthritis (OA) incidence and progression.

Methods: We measured the mechanical axis from long limb radiographs from the Multicenter Osteoarthritis Study (MOST) and the Osteoarthritis Initiative (OAI) to define limbs with valgus malalignment (mechanical axis of ≥1.1° valgus) and examined the effect of valgus alignment versus neutral alignment (neither varus nor valgus) on OA structural outcomes.

Morphologic differences between the hips of Chinese women and white women: could they account for the ethnic difference in the prevalence of hip osteoarthritis?

Objective: Hip osteoarthritis (OA) is a common disabling disease, which has a much higher prevalence in whites than in Asians. The reasons for this ethnic difference in prevalence are unknown. Hip OA is often thought to be secondary to morphologic abnormalities.

Can anatomic alignment measured from a knee radiograph substitute for mechanical alignment from full limb films?

Objectives: To examine whether categories of anatomic alignment (varus, neutral, valgus) measured from knee X-rays agree with similar categories of mechanical alignment from the full limb film and whether varus anatomic malalignment predicts medial joint space loss on knee X-rays as well as varus mechanical alignment.

Methods: We used data from the Osteoarthritis Initiative (OAI) (full limb and flexed knee X-rays) to examine agreement of anatomic and mechanical alignment and data from Boston Osteoarthritis of the Knee Study (BOKS) to evaluate the association of full limb mechanical alignment vs knee X-ray anatomic alignment with joint space loss. A 4 degree offset was used to correct for the more valgus angulation of the anatomic alignment.