Production and in vitro characterization of 3D porous scaffolds made of magnesium carbonate apatite (MCA)/anionic collagen using a biomimetic approach.

3D porous scaffolds are relevant biomaterials to bone engineering as they can be used as templates to tissue reconstruction. The aim of the present study was to produce and characterize in vitro 3D magnesium-carbonate apatite/collagen (MCA/col) scaffolds. They were prepared by using biomimetic approach, followed by cross-linking with 0.

Role of culture conditions on in vitro transformation and cellular colonization of biomimetic HA-Col scaffolds.

We have recently developed new 3D hydroxyapatite/collagen (50/50 wt%) scaffolds using a biomimetic synthesis approach. The first in vitro tests performed in static culture showed a limited cell colonization and survival inside the scaffolds. The current study evaluated in dynamic culture the scaffold changes and colonization by human immortalized osteoprogenitor STRO-1A cells.

Maximisation of the ratio of microhardness to the Young's modulus of Ti-12Mo-13Nb alloy through microstructure changes.

Alloys for orthopaedic and dentistry applications require high mechanical strength and a low Young's modulus to avoid stress shielding. Metastable β titanium alloys appear to fulfil these requirements. This study investigated the correlation of phases precipitated in a Ti-12Mo-13Nb alloy with changes in hardness and the Young's modulus.

Synthesis and characterization of biocomposites with different hydroxyapatite-collagen ratios.

Hydroxyapatite (HA)-type I collagen (Col) composite is a tissue-engineered bone graft which can act as a carrier or a template structure for cells or any other agents. In this paper, the effect of Col ratio on the scaffold structure and composition was analyzed. Scaffolds composed by HA/Col with different weight ratios (80:20; 50:50; 20:80, and 10:90) were produced by the precipitation method at pH 8-9, 37 degrees C and 6 h of ripening.

Human osteoblasts adhesion and proliferation on magnesium-substituted tricalcium phosphate dense tablets.

Tricalcium phosphate (TCP) is recognized as a promising bone replacement material due to its high bioactivity and resorbable properties. To mimic biological apatites, incorporation of magnesium (Mg) in TCP was proposed. Mg-substituted TCP (beta-TCMP) and beta-TCP dense tablets were obtained by pressing and sintering at 1,000 degrees C Mg-substituted calcium deficient apatite (Mg-CDA) and commercial TCP, respectively.

Hardness and elastic modulus of TiO2 anodic films measured by instrumented indentation.

The aim of this work was to investigate the mechanical properties of the titanium anodic films (TiO2) produced by anodic oxidation under galvanostatic conditions, using a 1.4M phosphoric acid electrolyte, with different current densities (J) on commercially pure titanium (cp-Ti). The morphology of the oxide films were observed by scanning electron microscopy (SEM), whereas the composition of the film was determined by Raman spectroscopy.

Effects of surface undulations of biphasic calcium phosphate tablets on human osteoblast behavior.

In this work, the in vitro behavior of human osteoblast cells on the undulated surfaces of biphasic calcium phosphate tablets was investigated. The tablets were produced by uniaxial pressing with convex cylindrical undulations occupying only half of the surface area; the other half was flat. Chemical and physical characterization was performed by scanning electron microscopy (SEM), atomic force microscopy (AFM), X-ray diffraction (XRD) and Fourier transform infrared spectroscopy (FTIR).