Fixation strength of swelling copolymeric anchors in artificial bone.

Fixation with suture anchors and metallic hardware for osteosynthesis is common in orthopedic surgeries. Most metallic commercial bone anchors achieve their fixation to bone through shear of the bone located between the threads. They have several deficiencies, including stress-shielding due to mechanical properties mismatch, generation of acidic by-products, poor osteointegration, low mechanical strength and catastrophic failure often associated with large bone defects that may be difficult to repair.

Engineering Toughness in a Brittle Vinyl Ester Resin Using Urethane Acrylate for Additive Manufacturing.

Thermosetting polymers tend to have a stiffness-toughness trade-off due to the opposing relationship of stiffness and toughness on crosslink density. We hypothesize that engineering the polymer network, e.g.

Engineered Interleaved Random Glass Fiber Composites Using Additive Manufacturing: Effect of Mat Properties, Resin Chemistry, and Resin-Rich Layer Thickness.

Standard lay-up fabrication of fiber-reinforced composites (FRCs) suffer from poor out-of-plane properties and delamination resistance. While advanced manufacturing techniques (e.g.

Predicting the Dynamics and Steady-State Shape of Cylindrical Newtonian Filaments on Solid Substrates.

The spreading of liquid filaments on solid surfaces is of paramount importance to a wide range of applications including ink-jet printing, coating, and direct ink writing (DIW). However, there is a considerable lack of experimental, numerical, and theoretical studies on the spreading of filaments on solid substrates. In this work, we studied the dynamics of spreading of Newtonian filaments via experiment, numerical simulations, and theoretical analysis.

High , Bio-Based Isosorbide Methacrylate Resin Systems for Vat Photopolymerization.

The use of isosorbide-derived polymers has garnered significant attention in recent decades as a high-performance, renewable material sourced from biomass. Of particular interest is isosorbide methacrylate, which possesses low viscosity (<500 cps), high thermal properties ( ≈ 220 °C), and high modulus (>4 GPa). These characteristics present a promising opportunity to replace BPA-derived methacrylate compounds in various applications.

A generalized scaling theory for spontaneous spreading of Newtonian fluids on solid substrates.

Hypothesis: There exists a generalized solution for the spontaneous spreading dynamics of droplets taking into account the influence of interfacial tension and gravity.

Experiments: This work presents a generalized scaling theory for the problem of spontaneous dynamic spreading of Newtonian fluids on a flat substrate using experimental analysis and numerical simulations. More specifically, we first validate and modify a dynamic contact angle model to accurately describe the dependency of contact angle on the contact line velocity, which is generalized by the capillary number.

Effect of Microcapsule Content on Diels-Alder Room Temperature Self-Healing Thermosets.

A furan functionalized epoxy-amine thermoset with an embedded microcapsule healing system that utilizes reversible Diels-Alder healing chemistry was used to investigate the influence of microcapsule loading on healing efficiency. A urea-formaldehyde encapsulation technique was used to create capsules with an average diameter of 150 µm that were filled with a reactive solution of bismaleimide in phenyl acetate. It was found that optimum healing of the thermoset occurred at 10 wt% microcapsule content for the compositions investigated.

Synthesis and Swelling Behavior of Highly Porous Epoxy Polymers.

Many advantageous properties of cross-linked polymers relate to their network structures. In this study, network structures of three DGEBA-based epoxy systems at various DGEBA monomer sizes were investigated via equilibrium swelling and glass transition behavior. Each system was cured with a tetra-functional diamine, 4,4'-methylenebiscyclohexanamine, in the presence of a nonreactive solvent, i.

Formulation of a Model Resin System for Benchmarking Processing-Property Relationships in High-Performance Photo 3D Printing Applications.

A well-defined resin system is needed to serve as a benchmark for 3D printing of high-performance composites. This work describes the design and characterization of such a system that takes into account processability and performance considerations. The Grunberg-Nissan model for resin viscosity and the Fox equation for polymer were used to determine proper monomer ratios.

Water Transport and Thermomechanical Properties of TiCT MXene Epoxy Nanocomposites.

Herein, we present the fabrication of dispersed, 5.0 wt % (1.74 vol %) TiCT MXene epoxy nanocomposites (NCs), and report on their water transport and mechanical properties.

The evolution of crystalline structures during gel spinning of ultra-high molecular weight polyethylene fibers.

Most studies are focused on the final mechanical properties of the fiber and the processing window required to achieve high moduli and tensile strength. Several studies have alluded to the fact that the crystalline morphologies developed during gel spinning and post-drawing are very important in determining the final mechanical properties. However, it is surprising to know that no clear correlation exists between the crystalline structure and initial, evolving, and final mechanical properties.

Toughening Anhydride-Cured Epoxy Resins Using Fatty Alkyl-Anhydride-Grafted Epoxidized Soybean Oil.

The aim of this work is to develop a series of advanced biobased tougheners for thermosetting epoxy resins suitable for high-performance applications. These bio-rubber (BR) tougheners were prepared via a one-step chemical modification of epoxidized soybean oil using biobased hexanoic anhydride. To investigate their toughening performance, these BR tougheners were blended with diglycidyl ether of bisphenol A epoxy monomers at various weight fractions and cured with anhydride hardeners.

Experimental Data Extraction and in Silico Prediction of the Estrogenic Activity of Renewable Replacements for Bisphenol A.

Bisphenol A (BPA) is a ubiquitous compound used in polymer manufacturing for a wide array of applications; however, increasing evidence has shown that BPA causes significant endocrine disruption and this has raised public concerns over safety and exposure limits. The use of renewable materials as polymer feedstocks provides an opportunity to develop replacement compounds for BPA that are sustainable and exhibit unique properties due to their diverse structures. As new bio-based materials are developed and tested, it is important to consider the impacts of both monomers and polymers on human health.

Interfacial optimization of fiber-reinforced hydrogel composites for soft fibrous tissue applications.

Meniscal tears are the most common orthopedic injuries to the human body, yet the current treatment of choice is a partial meniscectomy, which is known to lead to joint degeneration and osteoarthritis. As a result, there is a significant clinical need to develop materials capable of restoring function to the meniscus following an injury. Fiber-reinforced hydrogel composites are particularly suited for replicating the mechanical function of native fibrous tissues due to their ability to mimic the native anisotropic property distribution present.

Room temperature self-healing thermoset based on the Diels-Alder reaction.

A self-healing epoxy-amine thermoset based on the compatible functionalization of the thermoset and encapsulated healing agent has been successfully developed. Healing of the thermoset resulted from the reaction of furans in the thermoset and multimaleimides (MMIs) in the healing agent solution. The healing agent, MMI dissolved in phenyl acetate, was encapsulated using a urea-formaldehyde encapsulation method.

Isosorbide as the structural component of bio-based unsaturated polyesters for use as thermosetting resins.

In recent years, the development of renewable bio-based resins has gained interest as potential replacements for petroleum based resins. Modified carbohydrate-based derivatives have favorable structural features such as fused bicyclic rings that offer promising candidates for the development of novel renewable polymers with improved thermomechanical properties when compared to early bio-based resins. Isosorbide is one such compound and has been utilized as the stiffness component for the synthesis of novel unsaturated polyesters (UPE) resins.

Kinetic considerations for strength recovery at the fiber-matrix interface based on the Diels-Alder reaction.

The Diels-Alder reaction was used to yield thermal reversibility of the bonding between a partially furan-functionalized epoxy thermosetting matrix and a maleimide-treated glass fiber. Under ambient temperature conditions, the covalent bond forming product reaction dominates, but this reaction reverses at elevated temperatures to allow for interfacial healing. Single-fiber microdroplet pull-out testing was used to characterize the coupled effects of healing temperature and the glass transition temperature (T(g)) of the epoxy on interfacial strength recovery.

Synthesis and characterization of ionic polymer networks in a room-temperature ionic liquid.

Ionic liquid gels (ILGs) for potential use in ion transport and separation applications were generated via a free radical copolymerization of 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) and N,N'-methylene(bis)acrylamide (MBA) using 1-ethyl-3-methylimidazolium ethylsulfate (IL) as a room temperature ionic liquid solvent medium. The AMPS and MBA monomer solubility window in the IL in the temperature range of 25 to 65 °C was determined. In situ ATR-FTIR showed near complete conversion of monomers to a cross-linked polymer network.

Aging behavior of PVA hydrogels for soft tissue applications after in vitro swelling using osmotic pressure solutions.

The osmotic pressure of the medium used for in vitro swelling evaluation has been shown to have a significant effect on the swelling behavior of a material. In this study, the effect of osmotic pressure during swelling on poly(vinyl alcohol) hydrogel material properties was evaluated in vitro. Osmotic pressure solutions are necessary in order to mimic the swelling pressure observed in vivo for soft tissues present in load-bearing joints.

Analysis of the in vitro swelling behavior of poly(vinyl alcohol) hydrogels in osmotic pressure solution for soft tissue replacement.

An osmotic solution was used to evaluate poly(vinyl alcohol) (PVA) hydrogels as potential non-degradable soft tissue replacements in vitro. Osmotic solutions are necessary in order to mimic the swelling pressure observed in vivo for soft tissues present in load-bearing joints. In vitro studies indicated that PVA hydrogels experience minimal changes in swelling with a polymer concentration of 20 wt.

Mechanical evaluation of poly(vinyl alcohol)-based fibrous composites as biomaterials for meniscal tissue replacement.

In this study, poly(vinyl alcohol) (PVA) hydrogels were reinforced with ultrahigh molecular weight polyethylene (UHMWPE) and PP fibers and evaluated as potential nondegradable meniscal replacements. An investigation of hydrogel and composite mechanical properties indicates that fiber-reinforced PVA hydrogels could replicate the unique anisotropic modulus distribution present in the native meniscus; the most commonly damaged orthopedic tissue. More specifically, fibrous reinforcement successfully increased the tensile modulus of the biomaterial from 0.

Room-temperature healing of a thermosetting polymer using the Diels-Alder reaction.

Self-healing materials are particularly desirable for load-bearing applications because they offer the potential for increased safety and material lifetimes. A furan-functionalized polymer network was designed that can heal via covalent bonding across the crack surface with the use of a healing agent consisting of a bismaleimide in solution. Average healing efficiencies of approximately 70% were observed.