Assessment of the Radioactivity, Metals Content and Mineralogy of Granodiorite from Calabria, Southern Italy: A Case Study.

In this paper, an assessment of the natural radioactivity level, radon exhalation, metal contamination, and mineralogy of a granodiorite rock sample from Stilo, in the Calabria region, Southern Italy is presented as a case study. This rock was employed as a building material in the area under study. The specific activity of Ra, Th and K natural radioisotopes was assessed through high-purity germanium (HPGe) gamma-ray spectrometry.

Natural Radioactivity in Raw Building Materials for Underground Parking Lots and Assessment of Radiological Health Risk for the Population.

This article reports the results of an investigation into the activity concentration of natural radionuclides in raw building materials for underground parking lots, together with the assessment of the radiation hazard for the public related to exposure to ionizing radiations. To this purpose, high-purity germanium (HPGe) γ-ray spectrometry was employed in order to quantify the average specific activity of Ra, Th, and K natural radioisotopes. With the aim to assess any possible radiological health risk for the population, the absorbed γ-dose rate (), the annual effective dose equivalent outdoor () and indoor (), the activity concentration index (), and the alpha index () were also estimated, resulting in values that were lower than the maximum recommended ones for humans.

Experimental characterization of the thermo-optic coefficient vs. temperature for 4H-SiC and GaN semiconductors at the wavelength of 632 nm.

The design of semiconductor-based photonic devices requires precise knowledge of the refractive index of the optical materials, a not constant parameter over the operating temperature range. However, the variation of the refractive index with the temperature, the thermo-optic coefficient, is itself temperature-dependent. A precise characterization of the thermo-optic coefficient in a wide temperature range is therefore essential for the design of nonlinear optical devices, active and passive integrated photonic devices and, more in general, for the semiconductor technology explored at different wavelengths, from the visible domain to the infrared or ultraviolet spectrum.

Multivariate Statistics, Mineralogy, and Radiological Hazards Assessment Due to the Natural Radioactivity Content in Pyroclastic Products from Mt. Etna, Sicily, Southern Italy.

In this article, an investigation of the natural radioactivity content of pyroclastic products from Mt. Etna, eastern Sicily, Southern Italy, was carried out. In particular, the assessment of the average activity concentration of the investigated radionuclides, related to the mineralogical phase composition of the analyzed samples, and the radiological health risk for the population, was performed.

Temperature dependence of the thermo-optic coefficient in 4H-SiC and GaN slabs at the wavelength of 1550 nm.

The refractive index and its variation with temperature, i.e. the thermo-optic coefficient, are basic optical parameters for all those semiconductors that are used in the fabrication of linear and non-linear opto-electronic devices and systems.

Radioactivity, Metals Pollution and Mineralogy Assessment of a Beach Stretch from the Ionian Coast of Calabria (Southern Italy).

In the present article, a case study is reported regarding an investigation carried out in order to assess radioactivity concentration, heavy metals pollution and mineralogy of a beach stretch extending from Soverato to Squillace municipalities of the Ionian coast of Calabria, South of Italy, a popular tourist destination, especially in summer. The analysis of radionuclides contents was performed by using a High Purity Germanium (HPGe) gamma-ray detector, in order to quantify the average specific activity of Ra, Th and K natural radionuclides and Cs anthropogenic radioisotope. The absorbed dose rate and the annual effective dose equivalent radiological hazard indices were also estimated.

A three-dimensional nerve guide conduit based on graphene foam/polycaprolactone.

In this study, a novel nerve guide conduit was developed, based on a three-dimensional (3D) graphene conductive core grown, by chemical vapor deposition (CVD) coupled with a polycaprolactone (PCL) polymer coating. Firstly, the monolithic 3D-graphene foam (3D-GF) was synthesized on Ni foam templates via inductive heating CVD, subsequently, Ni/Graphene samples were dipped successively in PCL and cyclododecane (CDD) solutions prior to the removal of Ni from the 3D-GF/PCL scaffold in FeCl. Our results showed that the electrical conductivity of the polymer composites reached to 25 S.

Micro-photoluminescence of Carbon Dots Deposited on Twisted Double-Layer Graphene Grown by Chemical Vapor Deposition.

Carbon-based nanomaterials, such as carbon dots (CDs) and graphene (Gr), feature outstanding optical and electronic properties. Hence, their integration in optoelectronic and photonic devices is easier thanks to their low dimensionality and offers the possibility to reach high-quality performances. In this context, the combination of CDs and Gr into new nanocomposite materials CDs/Gr can further improve their optoelectronic properties and eventually create new ones, paving the way for the development of advanced carbon nanotechnology.

Electrochemical synthesis of self-organized TiO crystalline nanotubes without annealing.

This work demonstrates that upon anodic polarization in an aqueous fluoride-containing electrolyte, TiO nanotube array films can be formed with a well-defined crystalline phase, rather than an amorphous one. The crystalline phase was obtained avoiding any high temperature annealing. We studied the formation of nanotubes in an HF/HO medium and the development of crystalline grains on the nanotube wall, and we found a facile way to achieve crystalline TiO nanotube arrays through a one-step anodization.

Chemical Vapor Deposited Graphene-Based Derivative As High-Performance Hole Transport Material for Organic Photovoltaics.

Unlabelled: The development of efficient charge transport layers is a key requirement for the fabrication of efficient and stable organic solar cells. A graphene-based derivative with planar resistivity exceeding 10(5) Ω/□ and work function of 4.9 eV is here produced by finely tuning the parameters of the chemical vapor deposition process on copper.

Nitrogen-doped graphene films from chemical vapor deposition of pyridine: influence of process parameters on the electrical and optical properties.

Graphene films were produced by chemical vapor deposition (CVD) of pyridine on copper substrates. Pyridine-CVD is expected to lead to doped graphene by the insertion of nitrogen atoms in the growing sp(2) carbon lattice, possibly improving the properties of graphene as a transparent conductive film. We here report on the influence that the CVD parameters (i.

Optical trapping of porous silicon nanoparticles.

Silicon nanoparticles obtained by ball-milling of a 50% porosity silicon layer have been optically trapped when dispersed in a water-surfactant environment. We measured the optical force constants using linearly and radially polarized trapping beams finding a reshaping of the optical potential and an enhanced axial spring constant for the latter. These measurements open perspectives for the control and handling of silicon nanoparticles as labeling agents in biological analysis and fluorescence imaging techniques.