Relationship between battery level and irradiance of light-curing units and their effects on the hardness of a bulk-fill composite resin.

Objectives: This study evaluated the relationship between the battery charge level and irradiance of light-emitting diode (LED) light-curing units (LCUs) and how these variables influence the Vickers hardness number (VHN) of a bulk-fill resin.

Materials And Methods: Four LCUs were evaluated: Radii Plus (SDI), Radii-cal (SDI), Elipar Deep Cure (Filtek Bulk Fill, 3M Oral Care), and Poly Wireless (Kavo Kerr). Irradiance was measured using a radiometer every ten 20-second activations until the battery was discharged.

In-office dental bleaching with violet light emitting diode: bleaching efficacy and pulpal temperature rise.

Objectives: This study evaluated the bleaching efficacy of different in-office protocols associated with violet light emitting diode (V-LED), and measured the pulpal temperature rise caused by V-LED with or without gel application.

Materials And Methods: Bovine incisors were distributed in 4 groups ( = 10): VL - V-LED; HP - 35% hydrogen peroxide (control); HYB - hybrid protocol, V-LED applied without gel for 10 irradiation cycles followed by V-LED applied with gel for another 10 irradiation cycles; and HPVL - gel and V-LED applied for 20 irradiation cycles. Three bleaching sessions were performed with 7-day intervals.

Is the clinical performance of composite resin restorations in posterior teeth similar if restored with incremental or bulk-filling techniques? A systematic review and meta-analysis.

Objectives: A systematic review was performed to analyze the clinical performance of class I and II restorations in posterior teeth placed with the incremental or the bulk-filling techniques. The primary outcome was retention/fracture rate, and the secondary outcomes evaluated were anatomical form, surface texture, color match, marginal adaption, marginal discoloration, caries, and postoperative sensitivity.

Methods: Electronic and manual searches were performed for randomized clinical trials comparing the clinical performance of composite resin restorations in posterior teeth placed with the incremental or the bulk-filling techniques.

Three-dimensional skeletal and dentoalveolar sagittal and vertical changes associated with cantilever Herbst appliance in prepubertal patients with Class II malocclusion.

Introduction: This study aimed to assess sagittal and vertical skeletal and dentoalveolar changes through the use of 3-dimensional imaging in prepubertal Class II malocclusion patients treated with a cantilever Herbst appliance (HA). Condyle-glenoid fossa positional changes were also quantified.

Methods: This retrospective cohort study assessed 22 children (11.

Influence of two carbodiimides on the bond strength of universal adhesives to dentin.

The pretreatment of dentin with cross-linking agents during bonding procedures has been proposed to improve the mechanical properties of the collagen in the hybrid layer and reduce the biodegradation of the adhesive interface. The aim of this study was to evaluate the influence of pretreatment with two carbodiimides on the dentin bond strength of universal adhesives, after thermocycling. Three universal adhesives in the self-etching mode were used (Single Bond Universal-SBU, Clearfil Universal-CLU and Ambar Universal-ABU).

Flexural strength and crystalline stability of a monolithic translucent zirconia subjected to grinding, polishing and thermal challenges.

The objective of this study is to investigate the magnitude of structural degradation of a monolithic translucent zirconia caused by clinically relevant grinding and polishing procedures, when associated or not with low temperature degradation (LTD), induced by accelerated hydrothermal aging using autoclave or thermocycling Ninety disks (Ø12 × 1 mm) were prepared from dental zirconia for monolithic restorations (Vipi Block Zirconn Translucent, Vipi). The specimens were divided into 3 groups (n = 30) according to surface treatment: As Sintered (untreated), Grind (diamond bur), Grind + Polish (diamond bur + polish); and then subdivided according to aging method (n = 10): Baseline (no aging), Autoclave (134°C, 2.2 kgf/cm pressure for 5 h), and Thermocycling (200,000 cycles, 5°C and 55°C, for 15 s each).

Esthetic perception of facial profile changes in Class II patients treated with Herbst or Forsus appliances.

Objective: To evaluate the esthetic perceptions of orthodontists and laypersons for facial profile changes after orthodontic treatment using Herbst or Forsus appliances.

Materials And Methods: Pre- and posttreatment facial profile contour images of 20 Class II patients treated with Herbst (group H; n = 10) and Forsus (group F; n = 10) appliances were analyzed by 30 orthodontists and 30 laypersons, who graded them from 1 (unattractive) to 10 (very attractive) using a visual analog scale. Two assessments were carried out with a 15 day-interval.

Retrospective clinical and radiographic evaluation of restored endodontically treated teeth.

Objectives: The aim of this study was to perform a clinical and radiographic analysis of endodontically treated teeth (ETT) restored with cast metal posts (CMPs) or prefabricated glass fiber posts (GFPs) and crowns.

Materials And Methods: Fifty ETT were restored with 25 CMPs and 25 GFPs at a private dental clinic between 2001 and 2016. The restorations consisted of 12 all-ceramic crowns, 31 metal-ceramic crowns, and 7 composite resin crowns.

The bleaching efficacy of carbamide peroxide gels containing potassium nitrate desensitizer.

Background: To evaluate the bleaching efficacy of at-home carbamide peroxide (CP) gels in two concentrations, containing or not a desensitizing agent.

Material And Methods: Forty incisors were divided into four groups (n=10), according to gel concentrations (10% or 22%), and presence or not of 3% potassium nitrate in the gel. A thin layer of gel was applied to the buccal surface of each tooth for 2h/day for 4 weeks.

Influence of acidic monomer concentration and application mode on the bond strength of experimental adhesives.

The aim of this research was to evaluate the influence of MDP (10-methacryloyloxydecyl dihydrogen phosphate) concentration and application mode of experimental adhesives on microshear bond strength (μSBS) to dentin after storage in distilled water at 37°C for 24h and 6 months. Five experimental adhesives were prepared with: CQ, DABE, BHT, ethanol, HEMA, TEGDMA, Bis-EMA, UDMA, and Bis-GMA. Concentrations of 0 wt%, 3 wt%, 9 wt%, 12 wt% or 15 wt% of MDP were added to their composition.

Surface Deterioration of Indirect Restorative Materials.

The objective of this work was to evaluate the effects of in vitro and in situ biodegradation on the surface characteristics of two resin cements and a hybrid ceramic system. One hundred and eighty specimens (4X1.5mm) of each material (Maxcem Elite, NX3 Nexus and Vita Enamic) were made and randomly distributed in twelve groups (n=15) according to the material and biodegradation method.

Color Stability of Ceramic Veneers Luted With Resin Cements and Pre-Heated Composites: 12 Months Follow-Up.

The objective was to evaluate the color stability of ceramic veneers luted with resin cements and pre-heated composite resins (60oC) for 12 months, and determine the degree of conversion (DC) of the luting agents. Two resin cements (AllCem Veneer, light-cured (LRC) and AllCem, dual-cured (DRC)] and three composite resins [Z100 (MNCR-minifilled), Herculite Classic (MHCR-micro-hybrid) and Durafill (MCCR-microfilled)] were used for cementing 0.8-mm-thick lithium-silicate glass-ceramic laminates (Suprinity, shade B2-HT, Vita) on bovine enamel (n=10).

Cara smile: Use of planning software to facilitate esthetic dental treatment in a case.

Treatment of the anterior teeth is challenging. Computer resources and software are available to facilitate a digital smile approach, thus allowing the dentist to plan and predict an esthetic result for a patient, particularly when an integrated multidisciplinary approach is necessary. Digital smile design has emerged as a tool in cosmetic dentistry that helps both professionals and the patient to visualize the result, in addition to facilitating a discussion between the two before establishing a final treatment decision.

Long-term color stability of orthodontic adhesives after exposure to different staining agents.

Context: The aims of this study were (i) to evaluate the color stability of two orthodontic adhesives and (ii) to evaluate the color stability of enamel and ceramic brackets bonded with orthodontic adhesives after exposure to different staining agents.

Materials And Methods: Disks were prepared with two orthodontic adhesives (Transbond and Enlight). Color stability evaluation was performed with a spectrophotometer using CIELab parameters.

Esthetic Rehabilitation with Direct Composite Resin in a Patient with Amelogenesis Imperfecta: A 2-Year Follow-Up.

Amelogenesis imperfecta is a group of conditions caused by over 15 different genes that affects the development of dental enamel and poses some challenges to dentists. An adult patient with amelogenesis imperfecta with severe changes in tooth color and reduction of occlusal vertical dimension sought dental treatment. Diagnostic wax-up was carried out to guide the stratification of a nanoparticulate resin for the restorative treatment.

Orthodontic Treatment of Ankylosed Maxillary Incisor through Osteogenic Distraction and Simplified Biomechanics.

Ankylosed teeth may have a significant esthetic and functional impact especially at the anterior segment of the upper arch. Treatment of ankylosed teeth is challenging. The objective of this case report is to describe a clinical case in which an ankylosed tooth was treated with the use of osteogenic distraction associated with simplified orthodontic biomechanics.

Effects of Active Oxygen Toothpaste in Supragingival Biofilm Reduction: A Randomized Controlled Clinical Trial.

Gingivitis is still considered a major risk factor for the occurrence and progression of periodontal disease. The aim of the present study was to compare the long-term (1, 12, and 18 weeks) antiplaque and antigingivitis efficacies of two commercially available toothpastes, Colgate Total (CT) and BlueM (BM), against attached supragingival dental plaque and gingival inflammation in an experimental gingivitis model. A parallel double-blinded randomized clinical trial including 39 dental students who refrained from all plaque control methods (manual or chemical) for 7 days was conducted.

Clinical Steps for Restoration of Fractured Anterior Teeth: Color Protocol with Non-VITA Scale.

Direct composite resin restorations are commonly provided because of their satisfactory esthetics and minimal wear of opposing tooth structure. Recent restorative systems may not follow the nomenclature of the classical VITA shade guide, using instead a simplified resin color system. A better understanding of these systems and their behavior regarding the incidence of light is an excellent approach to anterior restorations, especially for fractured anterior teeth.

Color stability of ceramic veneers as a function of resin cement curing mode and shade: 3-year follow-up.

The influence of curing mode and shade of resin cements on the color stability of minimum-thickness ceramic veneers after a three-year storage time in distilled water was evaluated in this study. Ninety-six 0.5-mm-thick feldspathic ceramic veneers (Mark II) were luted onto resin composite substrates (Filtek Z350 XT, shade A2E) with two light-cured (NX3 Light-cure and AllCem Veneer) and dual-cured resin cements (NX3 dual-cure and AllCem) in various shades.

Influence of Pre-Curing Different Adhesives on the Color Stability of Cemented Thin Ceramic Veneers.

The objective was to evaluate the color stability of thin ceramic veneers as a function of the curing mode (with and without pre-cure) of different adhesive systems applied to the internal surface of ceramics. Five adhesive systems (Scotchbond Multi-Purpose, Single Bond Universal, Gluma 2 Bond, Ambar, and Ambar APS) and photo-cured resin cement (Allcem Veneer) were used for cementing 0.6 mm-thick feldspathic veneers (Mark II) on composite resin substrates (Charisma Diamond).

Do anterior and posterior teeth treated with post-and-core restorations have similar failure rates? A systematic review and meta-analysis.

Statement Of Problem: The association between tooth type, location in the dental arch, and selection of a post-and-core system for endodontically treated teeth is unclear. Information on the influence of these parameters on the failure rate of teeth treated with post-and-core restorations is needed.

Purpose: The purpose of this systematic review and meta-analysis was to assess the available evidence on the failure rates of anterior and posterior teeth treated with post-and-core restorations.

Effect of different bleaching protocols on whitening efficiency and enamel superficial microhardness.

Background: Tooth bleaching is a popular aesthetic treatment to modify the color of teeth. Despite the extensive literature concerning the subject, there is still no consensus regarding the application mode of the different bleaching agents and their effect on enamel. Therefore, this study evaluated the influence of different bleaching protocols on whitening efficiency and enamel superficial hardness.

Micro-CT Analysis of Y-TZP Copings Made by Different CAD/CAM Systems: Marginal and Internal Fit.

Purpose: The aim of the study was to measure the marginal and internal adaptation (MIA) of zirconia copings, made of 4 ceramic systems for CAD/CAM, using microcomputed tomography (micro-CT) technology.

Material And Methods: Two identical stainless steel models were used, representing a preparation for full ceramic crown on a lower molar. The master models were then scanned for the production of copings from specific yttrium oxide partially stabilized tetragonal zirconia polycrystal ceramic blocks of each system (=10): Cerec/inCoris Zi, Sirona; Cercon/Cercon base, Dentsply; Ceramill/Ceramill Zi, Amann Girrbach; and Lava/Lava Frame Zirconia, 3M ESPE.

Digital smile design and mock-up technique for esthetic treatment planning with porcelain laminate veneers.

The use of digital tools offers a new perspective to daily clinical activities. The digital information serves as a starting point for a wax-up and intraoral mock-up, which is widely reported in literature as an objective and efficient communication tool among dentist, patient, and technician. This case report of a maxillary anterior rehabilitation demonstrates esthetic planning with the digital smile design (DSD) system and a direct mock-up technique.