Wearable Sensor Node for Safety Improvement in Workplaces: Technology Assessment in a Simulated Environment.

Personal protective equipment (PPE) has been universally recognized for its role in protecting workers from injuries and illnesses. Smart PPE integrates Internet of Things (IoT) technologies to enable continuous monitoring of workers and their surrounding environment, preventing undesirable events, facilitating rapid emergency response, and informing rescuers of potential hazards. This work presents a smart PPE system with a sensor node architecture designed to monitor workers and their surroundings.

Concept Drift Mitigation in Low-Cost Air Quality Monitoring Networks.

Future air quality monitoring networks will integrate fleets of low-cost gas and particulate matter sensors that are calibrated using machine learning techniques. Unfortunately, it is well known that concept drift is one of the primary causes of data quality loss in machine learning application operational scenarios. The present study focuses on addressing the calibration model update of low-cost NO sensors once they are triggered by a concept drift detector.

Electric Transmission and Distribution Network Air Pollution.

There is a consensus within the scientific community regarding the effects on the environment, health, and climate of the use of renewable energy sources, which is characterized by a rate of harmful polluting emissions that is significantly lower than that typical of fossil fuels. On the other hand, this transition towards the use of more sustainable energy sources will also be characterized by an increasingly widespread electrification rate. In this work, we want to discuss whether electricity distribution and transmission networks and their main components are characterized by emissions that are potentially harmful to the environment and human health during their operational life.

Crowdsensing IoT Architecture for Pervasive Air Quality and Exposome Monitoring: Design, Development, Calibration, and Long-Term Validation.

A pervasive assessment of air quality in an urban or mobile scenario is paramount for personal or city-wide exposure reduction action design and implementation. The capability to deploy a high-resolution hybrid network of regulatory grade and low-cost fixed and mobile devices is a primary enabler for the development of such knowledge, both as a primary source of information and for validating high-resolution air quality predictive models. The capability of real-time and cumulative personal exposure monitoring is also considered a primary driver for exposome monitoring and future predictive medicine approaches.

Correction: Alfano et al. A Review of Low-Cost Particulate Matter Sensors from the Developers' Perspectives. 2020, , 6819.

The authors wish to make the following corrections to this paper [...

A Review of Low-Cost Particulate Matter Sensors from the Developers' Perspectives.

The concerns related to particulate matter's health effects alongside the increasing demands from citizens for more participatory, timely, and diffused air quality monitoring actions have resulted in increasing scientific and industrial interest in low-cost particulate matter sensors (LCPMS). In the present paper, we discuss 50 LCPMS models, a number that is particularly meaningful when compared to the much smaller number of models described in other recent reviews on the same topic. After illustrating the basic definitions related to particulate matter (PM) and its measurements according to international regulations, the device's operating principle is presented, focusing on a discussion of the several characterization methodologies proposed by various research groups, both in the lab and in the field, along with their possible limitations.

CVD transfer-free graphene for sensing applications.

The sp carbon-based allotropes have been extensively exploited for the realization of gas sensors in the recent years because of their high conductivity and large specific surface area. A study on graphene that was synthetized by means of a novel transfer-free fabrication approach and is employed as sensing material is herein presented. Multilayer graphene was deposited by chemical vapour deposition (CVD) mediated by CMOS-compatible Mo.

Effects of graphene defects on gas sensing properties towards NO detection.

The crystal structure of graphene flakes is expected to significantly affect their sensing properties. Here we report an experimental investigation on the crystalline structure of graphene aimed at exploring the effects on the gas sensing properties. The morphology of graphene, prepared via Chemical Vapor Deposition (CVD), Liquid Phase Exfoliation (LPE) and Mechanical Exfoliation (ME), is inspected through Raman spectroscopy, Atomic Force Microscopy (AFM) and Scanning Electron Microscopy (SEM).

Chemical Sensors and Biosensors in Italy: A Review of the 2015 Literature.

The contributions of Italian researchers to sensor research in 2015 is reviewed. The analysis of the activities in one year allows one to obtain a snapshot of the Italian scenario capturing the main directions of the research activities. Furthermore, the distance of more than one year makes meaningful the bibliometric analysis of the reviewed papers.

The Development of Sensor Applications in the Sectors of Energy and Environment in Italy, 1976-2015.

Although sensor technologies have been developing quite similarly all over the world, the investigation of their applications has been more affected by the specific industrial and economic characteristics of each country. This paper aims to investigate the development of applications based on sensor devices in the sectors of energy and the environment, in Italy, throughout the last forty years (1976-2015), examining the most relevant papers published by Italian R & D groups working in this field. Italy depends on foreign imports for more than 80% of its primary energy needs, and this has directed the research effort on the development of sensor applications both to improve load shaping and consumers' awareness and to develop specific equipment to maximize renewable energy production.

Electronic Noses for Composites Surface Contamination Detection in Aerospace Industry.

The full exploitation of Composite Fiber Reinforced Polymers (CFRP) in so-called design is still limited by the lack of adequate quality assurance procedures for checking the adhesive bonding assembly, especially in load-critical primary structures. In this respect, contamination of the CFRP panel surface is of significant concern since it may severely affect the bonding and the mechanical properties of the joint. During the last years, the authors have developed and tested an electronic nose as a non-destructive tool for pre-bonding surface inspection for contaminants detection, identification and quantification.

Embryotoxicity and spermiotoxicity of nanosized ZnO for Mediterranean sea urchin Paracentrotus lividus.

The effect of nano ZnO (nZnO) upon the fertilization and early development of embryos of the Mediterranean sea urchin Paracentrotus lividus is reported herein for the first time. Zn ion (ZnCl2) and bulk ZnO (bZnO) toxicity were assessed for comparison. The embryotoxicity tests showed a 100% effect already at 1 μM of nZnO (expressed as [Zn]) while bZnO and ZnCl2 showed EC50s of 0.

Toxic effects of ZnO nanoparticles towards marine algae Dunaliella tertiolecta.

Dose response curve and population growth rate alterations of marine Chlorophyte Dunaliella tertiolecta derived from the exposure to ZnO nanoparticles were evaluated. Bulk ZnO and ionic zinc were also investigated for comparison. At the same time, the aggregation state and particle size distribution were monitored.

Investigation of ZnO nanoparticles' ecotoxicological effects towards different soil organisms.

Introduction: Nanomaterials have widespread applications in several industrial sectors. ZnO nanoparticles (NPs) are among the most commonly used metal oxide NPs in personal care products, coating and paints. However, their potential toxicological impact on the environment is largely unexplored.

Single palladium nanowire growth in place assisted by dielectrophoresis and focused ion beam.

Here we report, for the first time, on the combined use of Focused Ion Beam and Dielectrophoresis techniques for the fabrication of a nanodevice whose operating mechanism relies on a single palladium nanowire. Focused Ion Beam is used to deposit, without photolithographic masks, platinum microelectrodes on a silicon/silicon nitride substrate. Dielectrophoresis is employed for assembling the palladium nanowire, starting from a saturated palladium particles solution, and precisely positioning it between the nanocontacts.

Silicon infrared diffuser for wireless communication.

We show what we believe to be a novel way to use silicon in infrared radio communication as a suitable material for the realization of optical diffusers in the range of 850-1600 nm. A crystalline silicon wafer is made porous by means of electrochemical etching. The porous silicon produced is optically characterized, and measurements report a high reflectance in the band of interest.

Towards a label-free optical porous silicon DNA sensor.

We report on the fabrication of an optical silicon-based label-free DNA sensor. n-Type crystalline silicon wafers have been electrochemically etched to form porous silicon layers and characterized in terms of porosity, pore distribution, surface composition and photoluminescence. Samples (0.