Exploiting CO laser to boost graphite inks electron transfer for fructose biosensing in biological fluids.

The possibility to print electronics by means of office tools has remarkedly increased the possibility to design affordable and robust point-of-care/need devices. However, conductive inks suffer from low electrochemical and rheological performances limiting their applicability in biosensors. Herein, a fast CO laser approach to activate printed carbon inks towards direct enzymatic bioelectrocatalysis (3 generation) is proposed and exploited to build biosensors for D-fructose analysis in biological fluids.

Laser-induced 2D/0D graphene-nanoceria freestanding paper-based films for on-site hydrogen peroxide monitoring in no-touch disinfection treatments.

A one-shot CO laser-based strategy to generate conductive reduced graphene oxide (rGO) decorated with nanoceria (nCe) is proposed. The 2D/0D rGO-nCe films, integrated as catalytic sensing layers in paper-based sensors, were employed for on-site monitoring of indoor fogging treatments against Listeria monocytogenes (Lm), a ubiquitous pathogenic bacterium. The rGO-nCe laser-assisted synthesis was optimized to preserve the rGO film morphological and electron-transfer features and simultaneously integrate catalytic nCe.

Enhanced Electron Transfer Efficiency of Fructose Dehydrogenase onto Roll-to-Roll Thermal Stamped Laser-Patterned Reduced Graphene Oxide Films.

Herein, a strategy to stamp laser-produced reduced graphene oxide (rGO) onto flexible polymers using only office-grade tools, namely, roll-to-roll thermal stamping, is proposed, proving for the first time its effectiveness for direct bioelectrocatalysis. This straightforward, scalable, and low-cost approach allows us to overcome the limits of the integration of laser-induced rGO-films in bioanalytical devices. Laser-produced rGO has been thermally stamped (TS) onto different polymeric substrates (PET, PVC, and EVA) using a simple roll-laminator; the obtained TS-rGO films have been compared with the native rGO (untransferred) via morphochemical and electrochemical characterization.

Toward nano-sized imprinted norepinephrine-derived biopolymer as artificial receptors for detecting IgG1 by surface plasmon resonance.

Bio-based nanostructured molecularly imprinted polymers (nano-MIPs), also known as 'plastibodies', have a real potential to be used as alternatives to natural antibodies. These nanostructures have recently gained significant attention for diagnostic and therapeutic purposes. In this context, we have developed polynorepinephrine (PNE)-based nano-MIPs using an eco-friendly one-pot process for the sensitive and selective detection of a model biomolecule, immunoglobulin IgG1.

Ecotoxicological assessment of water phase exfoliated two-dimensional Group-VI transition metal dichalcogenides using zebrafish embryo model.

Among emerging layered materials, 2D transition metal dichalcogenides (TMDs) nanosheets (n-sheets) have received increasing attention for optoelectronics, energy storage, and, recently, for bioremediation and advanced biomedical applications; however, a lack of ecotoxicological in vivo studies is evident. Herein, for the first time, the potential nanotoxicity of liquid phase exfoliated Group VI TMDs n-sheets (MoS, WS, WSe, and MoSe) was comparatively investigated using zebrafish embryos (Z-EBs) as an in-vivo model. The 2D n-sheets were produced directly in aqueous-medium, the obtained n-sheets were characterized by scanning electron microscopy, Raman and visible spectroscopy, and their potential nanotoxicity was investigated by fish embryo test OECD TG 236.

Orientation of capture antibodies on gold nanoparticles to improve the sensitivity of ELISA-based medical devices.

The sensitivity of ELISA-based devices strongly depends on the right orientation of antibodies on the sensor surface. The aim of this work was to increase the analytical performance of a commercial ELISA-based medical device (VIDAS®), thanks to the specific orientation of antibodies on gold nanostructured disposables. For this purpose, fPSA VIDAS® assay was used as model and the disposable providing the antigen binding surface (SPR®) was functionalized with gold nanostructures coated with monovalent half-fragment antibodies (reduced IgG, rIgG).

Unexplained Hyperthyrotropinemia: A Biochemical and Clinical Challenge.

Background: A raised serum TSH in the absence of a clear etiology, or "unexplained hyperthyrotropinemia" (UH), can be challenging for clinicians. The aim of the present study was to evaluate potential strategies aimed at a clinical and biochemical characterization of UH patients.

Methods: We compared 36 patients with UH with a control group of 14 patients with chronic autoimmune thyroiditis (CAT) and subclinical hypothyroidism.

An electronic nose based on 2D group VI transition metal dichalcogenides/organic compounds sensor array.

Rapid volatile organic compounds (VOCs) detection is a hot topic today; in this framework nanomaterials and their tailorable chemistry offer a plethora of compelling opportunities. In this work, Group VI transition metal dichalcogenides (TMDs, i.e.

Lysozyme is Sterically Trapped Within the Silica Cage in Bioinspired Silica-Lysozyme Composites: A Multi-Technique Understanding of Elusive Protein-Material Interactions.

Lysozyme is widely known to promote the formation of condensed silica networks from solutions containing silicic acid, in a reproducible and cost-effective way. However, little is known about the fate of the protein after the formation of the silica particles. Also, the relative arrangement of the different components in the resulting material is a matter of debate.

Metal nanoparticles based lab-on-paper for phenolic compounds evaluation with no sample pretreatment. Application to extra virgin olive oil samples.

In this work, a low-cost, disposable, and portable lab-on-paper device is proposed to simultaneously quantify total polyphenol content (TPC) and antioxidant capacity (AOC) in 15 min; the assay requires no pre-treatment of the samples. The lab-on-paper device fabrication has been carried out employing a xurography-based benchtop microfabrication technology using low-cost materials as chromatography paper and polymeric sheets. Extra virgin olive oil (EVOO) phenolic compounds' represents a nutritional added value, nevertheless, the high lipidic content hinders their direct and rapid analysis, resulting in an extremely challenging sample.

(+)-Catechin-assisted graphene production by sonochemical exfoliation in water. A new redox-active nanomaterial for electromediated sensing.

A new green and effective sonochemical liquid-phase exfoliation (LPE) is proposed wherein a flavonoid compound, catechin (CT), promotes the formation of conductive, redox-active, water-phase stable graphene nanoflakes (GF). To maximize the GF-CT redox activity, the CT concentration and sonication time have been studied, and the best performing nanomaterial-fraction selected. Physicochemical and electrochemical methods have been employed to characterize the morphological, structural, and electrochemical features of the GF-CT nanoflakes.

Functionalised nanoclays as microstructure modifiers for calcium and magnesium silicate hydrates.

Calcium silicate hydrate (C-S-H) is the main binding product of ordinary Portland concrete (OPC). Unfortunately, OPC production generates ∼5% of all anthropomorphic CO2. Among the most promising green alternatives, magnesium silicate hydrate (M-S-H) is a colloidal gel equivalent to C-S-H which exhibits weaker mechanical properties.

Effect of phenolic compounds-capped AgNPs on growth inhibition of Aspergillus niger.

An exponential increase of scientific works dealing with the use of polyphenol-rich 'natural products' for the synthesis of bioactive AgNPs is in progress. However, a lack of fundamental studies on phytochemical compounds involved, and their role is evident. In this work, a comprehensive study of the antifungal performances of silver nanoparticles (AgNPs) synthesized exclusively with phenolic compounds (PCs) with different structures and different antioxidant capacity is presented.

Plasmonic active film integrating gold/silver nanostructures for HO readout.

A nanostructured Ag/Au adhesive film for HO reagentless determination is here proposed. The film has been realised onto ELISA polystyrene microplates. Microwells surface has been initially modified with a gold nanoparticles (AuNPs)/polydopamine thin-film.

Class-selective voltammetric determination of hydroxycinnamic acids structural analogs using a WS/catechin-capped AuNPs/carbon black-based nanocomposite sensor.

A high-performance screen-printed electrode (SPE) based nanocomposite sensor integrating tungsten disulfide (WS) flakes decorated with catechin-capped gold nanoparticles (AuNP-CT) and carbon black (CB) has been developed. The excellent antifouling properties of WS decorated with AuNP-CT into a high conductivity network of CB results in high selectivity, sensitivity, and reproducibility for the simultaneous determination of hydroxycinnamic acid (hCN) structural analogs: caffeic (CF), sinapic (SP), and p-coumaric acids (CM). Using differential pulse voltammetry (DPV), the target hCNs resulted in three well-resolved oxidation peaks at SPE-CB-WS/AuNP-CT sensor.

Colorimetric determination of polyphenols via a gold nanoseeds-decorated polydopamine film.

A polystyrene ELISA plate (EP) modified with a thin film based on gold nanoseeds (AuSDs) assembled onto polydopamine (PDA) is proposed. The nanodecorated film (PDA@AuSD) allows to evaluate the polyphenols antioxidant capacity (AOC) through a colorimetric approach based on a seed-mediated growth strategy. Polyphenols, in the presence of the nanodecorated (PDA@AuSD) surfaces are able to drive an increase in size of the AuSDs according to their AOC; this produces an increase of the localized surface plasmon resonance (LSPR; maximum at λ ~ 550 nm) that is taken as analytical signal.

Sensing Zn in Aqueous Solution with a Fluorescent Scorpiand Macrocyclic Ligand Decorated with an Anthracene Bearing Tail.

Synthesis of the new scorpiand ligand L composed of a [9]aneN macrocyclic ring bearing a CHCHNHCH-anthracene tail is reported. L forms both cation (Zn) and anion (phosphate, benzoate) complexes. In addition, the zinc complexes of L bind these anions.

Tales of the Unexpected: The Case of Zirconium(IV) Complexes with Desferrioxamine.

The Zr complexes with desferrioxamine (HDFO) and its derivatives are the only Zr-based imaging agents for proton emission tomography (PET) that have been used so far in clinical trials. Nevertheless, a complete speciation of the Zr/HDFO system in solution has never been performed and the stability constants of the relevant complexes are still unknown. Here we report, for the first time, the speciation of this system in water, performed by potentiometric titrations, and the determination of the stability constants of all complexes formed in the pH range 2.

Moving the systemic evolutionary approach to cancer forward: Therapeutic implications.

We have previously presented a new Systemic Evolutionary Theory of Cancer (SETOC) based on the failure of proper endosymbiosis in eukaryotic cells. Here, we propose that the progressive uncoupling of two endosymbiotic subsystems (information and energy) inside the cell, as a consequence of long-term injuries, gives rise to alterations (i) in tissue interactions and (ii) in cell organization. In the first case, we argue that the impairment of both the coherent state and the synergy between intercellular communications underpins the onset of tissue dysplasia, that usually evolves towards cancer development.

Proteotoxicity in cardiac amyloidosis: amyloidogenic light chains affect the levels of intracellular proteins in human heart cells.

AL amyloidosis is characterized by widespread deposition of immunoglobulin light chains (LCs) as amyloid fibrils. Cardiac involvement is frequent and leads to life-threatening cardiomyopathy. Besides the tissue alteration caused by fibrils, clinical and experimental evidence indicates that cardiac damage is also caused by proteotoxicity of prefibrillar amyloidogenic species.

Impact of oil aging and composition on the morphology and structure of diesel soot.

Hypothesis: Soot is a black powder-like substance consisting of carbonaceous amorphous particles, formed by incomplete combustion of hydrocarbons. In the last decades, industrial research on lubricant oils has grown to develop more efficient formulations, mainly to reduce the formation of soot in oil so to increase engine lifetime. The comprehension of the mechanism of soot formation and particles growth/aggregation in times during real applications is of fundamental importance for the design of better performing lubricants.