Osteogenic Effect of a Bioactive Calcium Alkali Phosphate Bone Substitute in Humans.

(1) Background: The desire to avoid autograft harvesting in implant dentistry has prompted an ever-increasing quest for bioceramic bone substitutes, which stimulate osteogenesis while resorbing in a timely fashion. Consequently, a highly bioactive silicon containing calcium alkali orthophosphate (Si-CAP) material was created, which previously was shown to induce greater bone cell maturation and bone neo-formation than β-tricalcium phosphate (β-TCP) in vivo as well as in vitro. Our study tested the hypothesis that the enhanced effect on bone cell function in vitro and in sheep in vivo would lead to more copious bone neoformation in patients following sinus floor augmentation (SFA) employing Si-CAP when compared to β-TCP.

A tissue engineered 3D printed calcium alkali phosphate bioceramic bone graft enables vascularization and regeneration of critical-size discontinuity bony defects .

Recently, efforts towards the development of patient-specific 3D printed scaffolds for bone tissue engineering from bioactive ceramics have continuously intensified. For reconstruction of segmental defects after subtotal mandibulectomy a suitable tissue engineered bioceramic bone graft needs to be endowed with homogenously distributed osteoblasts in order to mimic the advantageous features of vascularized autologous fibula grafts, which represent the standard of care, contain osteogenic cells and are transplanted with the respective blood vessel. Consequently, inducing vascularization early on is pivotal for bone tissue engineering.

Development of a synthetic tissue engineered three-dimensional printed bioceramic-based bone graft with homogenously distributed osteoblasts and mineralizing bone matrix in vitro.

Over the last decade there have been increasing efforts to develop three-dimensional (3D) scaffolds for bone tissue engineering from bioactive ceramics with 3D printing emerging as a promising technology. The overall objective of the present study was to generate a tissue engineered synthetic bone graft with homogenously distributed osteoblasts and mineralizing bone matrix in vitro, thereby mimicking the advantageous properties of autogenous bone grafts and facilitating usage for reconstructing segmental discontinuity defects in vivo. To this end, 3D scaffolds were developed from a silica-containing calcium alkali orthophosphate, using, first, a replica technique - the Schwartzwalder-Somers method - and, second, 3D printing, (i.

Structural and spectroscopic characterization of a series of potassium- and/or sodium-substituted β-tricalcium phosphate.

In this paper, we report X-ray diffraction investigations as well as Raman and solid-state (31)P and (23)Na magic angle spinning nuclear magnetic resonance (NMR) characterization of three series of calcium orthophosphates. The general formulae of the studied compounds are Ca(10.5-x/2)M(x)(PO(4))(7), where M=K or Na and x=0, 0.

Osteoclastic bioresorption of biomaterials: two- and three-dimensional imaging and quantification.

Purpose: Bioresorbable materials have been developed in the hope that the body will replace them with newly formed tissue. The first step of this remodeling process in bone is the bioresorption of the material by osteoclasts. The aim of this study was to analyze osteoclastic resorption of biomaterials in vitro using the commonly used two-dimensional methods of light-microscopy (LM) and scanning electron microscopy (SEM) in comparison with infinite focus microscopy (IFM), a recently developed imaging method allowing for three-dimensional surface analysis.

Volumetric analysis of osteoclastic bioresorption of calcium phosphate ceramics with different solubilities.

Commonly, to determine osteoclastic resorption of biomaterials only the resorbed area is measured. The depth of the resorption pit, however, may also be important for the performance of a material. To generate such data we used two calcium phosphate ceramics (Ca(10) and Ca(2)).

Femtosecond laser induced fixation of calcium alkali phosphate ceramics on titanium alloy bone implant material.

Femtosecond lasers provide a novel method of attaching bioceramic material to a titanium alloy, thereby improving the quality of bone implants. The ultrashort 30 fs laser pulses (790 nm wavelength) penetrate a thin dip-coated layer of fine ceramic powder, while simultaneously melting a surface layer of the underlying metal. The specific adjustment of the laser parameters (pulse energy and number of pulses per spot) avoids unnecessary melting of the bioactive calcium phosphate, and permits a defined thin surface melting of the metal, which in turn is not heated throughout, and therefore maintains its mechanical stability.

Inhibition of mineralization by a calcium zirconium phosphate coating.

Bioactive ceramics used as coating materials combine the conductive properties of a bioceramic with the mechanical stability of the metal implant. We studied a calcium zirconium phosphate-containing coating material, FA-CZP [Ca(5)(PO(4))(3)F, CaZr(4)(PO(4))(6)], that is relatively insoluble in the biological milieu. The reaction of bone to this material was investigated histologically and histomorphometrically in an animal trial.

Effect of rapidly resorbable bone substitute materials on the temporal expression of the osteoblastic phenotype in vitro.

Ideally, bioactive ceramics for use in alveolar ridge augmentation should possess the ability to activate bone formation and, thus, cause the differentiation of osteoprogenitor cells into osteoblasts at their surfaces. Therefore, in order to evaluate the osteogenic potential of novel bone substitute materials, it is important to examine their effect on osteoblastic differentiation. This study examines the effect of rapidly resorbable calcium-alkali-orthophosphates on osteoblastic phenotype expression and compares this behavior to that of beta-tricalcium phosphate (TCP) and bioactive glass 45S5.

Histological and histomorphometric investigations on bone integration of rapidly resorbable calcium phosphate ceramics.

Resorbable ceramics can promote the bony integration of implants. Their rate of degradation should ideally be synchronized with bone regeneration. We report here the results of a histological study of implants with two resorbable calcium phosphate ceramic coatings: Ca(2)KNa(PO(4))(2)-(GB14) and Ca(10)[K/Na](PO(4))(7)-(602020).

Bioceramics composition modulate resorption of human osteoclasts.

Biomaterials used in bone regeneration are designed to be gradually resorbed by the osteoclast and replaced by new bone formed through osteoblastic activity. The aim of the present study is to analyze the role of osteoclasts in the resorption process. The attachment of human osteoclasts and the appearance of their resorption lacunae, when cultured on either the resorbable crystalline, calcium orthophosphate materials or on the long-term stable bioceramic material was investigated.

The effect of bioactive glass ceramics on the expression of bone-related genes and proteins in vitro.

Using biodegradable bone substitutes in alveolar ridge augmentation avoids second-site surgery for autograft harvesting. Considerable efforts have been undertaken to develop rapidly resorbable bone substitute materials with a higher degree of biodegradability than tricalcium phosphate (TCP). This study examines the effect of novel biodegradable glass ceramics on the expression of bone-related genes and proteins by human bone-derived cells (HBDC) and compares this behavior with that of TCP.

In vitro investigation of novel calcium phosphates using osteogenic cultures.

A rat bone marrow stromal cell (RBM) culture was used to evaluate novel bioactive calcium phosphate ceramics. Three rapidly resorbable, glassy crystalline materials with the main crystalline phase Ca2KNa(PO4)2 were investigated (sample code GB 1a, GB 14, GB 9). These materials were designed to exhibit a higher degree of biodegradability than tricalcium phosphate.

The modulation of osteogenesis in vitro by calcium titanium phosphate coatings.

Calcium phosphate coated titanium and titanium alloy are widely used as dental and orthopaedic implants. This study examines the effect of novel calcium titanium and calcium titanium zirconium phosphates suitable for plasma-spraying onto titanium substrata on the expression of bone-related genes and proteins by human bone-derived cells (HBDC) and compares this behavior to that on native titanium and hydroxyapatite-coated titanium. Test materials were an acid etched and sand-blasted titanium surface (Ti-DPS), a plasma-sprayed hydroxyapatite coating (HA), and five materials which were created from CaTi(4)(PO(4))(6) (CTP) and CaZr(4)(PO(4))(6) (CZP): sintered CaTi(4)(PO(4))(6) (CTP-S1), sintered 46CaO.

Effect of rapidly resorbable calcium phosphates and a calcium phosphate bone cement on the expression of bone-related genes and proteins in vitro.

The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation because it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates and a calcium phosphate bone cement on the expression of bone-related genes and proteins by human bone-derived cells (HBDCs) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were alpha-TCP, two materials with a crystalline phase Ca(2)KNa(PO(4))(2) and with a small amorphous portion containing either magnesium potassium phosphate (material denominated GB14) or silica phosphate (material denominated GB9), and a calcium phosphate bone cement (material denominated Biocement D).

The functional expression of human bone-derived cells grown on rapidly resorbable calcium phosphate ceramics.

The use of biodegradable bone substitutes is advantageous for alveolar ridge augmentation, since it avoids second-site surgery for autograft harvesting. This study examines the effect of novel, rapidly resorbable calcium phosphates on the expression of bone-related genes and proteins by human bone-derived cells (HBDC) and compares this behavior to that of tricalciumphosphate (TCP). Test materials were alpha-TCP, and four materials which were created from beta-Rhenanite and its derivatives: R1-beta-Rhenanite (CaNaPO(4)); R1/M2 composed of CaNaPO(4) and MgNaPO(4); R1+SiO(2) composed of CaNaPO(4) and 9% SiO(2) (wt%); and R17-Ca(2)KNa(PO(4))(2).

Evaluation of calcium phosphates and experimental calcium phosphate bone cements using osteogenic cultures.

In this study, rat bone marrow cells (RBM) were used to evaluate two biodegradable calcium phosphate bone cements and bioactive calcium phosphate ceramics. The substances investigated were: two novel calcium phosphate cements, Biocement F and Biocement H, tricalcium phosphate (TCP), surface-modified alpha-tricalcium phosphate [TCP (s)] and a rapid resorbable calcium phosphate ceramic consisting of CaKPO(4) (sample code R5). RBM cells were cultured on disc-shaped test substrates for 14 days.

Morphological evaluation of osteoblasts cultured on different calcium phosphate ceramics.

The objective of these investigations was to develop an in vitro test system for evaluating novel rapidly resorbable calcium phosphate ceramics of varying composition. Rat bone marrow cells were cultured on the disc-shaped test substrates for 14 days. Five calcium phosphates were examined: R1 CaNaPO4; R1/M2, composed of CaNaPO4 and MgNaPO4; R1/2, composed of CaNaPO4 and Mg2SiO4; R1 + 9% SiO2 consisting of CaNaPO4 and 9% SiO2 (wt%) and R17, Ca2KNa(PO4)2.

Rapid resorbable, glassy crystalline materials on the basis of calcium alkali orthophosphates.

Materials based on calcium orthophosphates have been developed to crystallize spontaneously and directly from the melt. The main crystalline phase consists of a new synthesized chemical of formula Ca2KNa(PO4)2. This compound crystallizes in a very wide range of chemical compositions as shown.